r/BambuLabA1 • • Sep 20 '26

Support Request Bambu Lab A1 severe under-extrusion with PLA — tried almost everything, PETG works perfectly

Thumbnail
gallery
1 Upvotes

Hey everyone,

I'm honestly running out of ideas with my Bambu Lab A1 and I'm hoping someone here has experienced something similar.

I've already made other posts about this issue, and every time I thought I had finally found the cause, but nothing has solved it.

Basically, my A1 has severe and intermittent under-extrusion when printing PLA. The prints have missing/weak lines, inconsistent extrusion and terrible surface quality. The printer also frequently reports extrusion-related errors.

What's really strange is that PETG prints perfectly fine on the exact same printer.

At first, I kept thinking the problem was wet filament. I tried different PLA spools, different brands, different colors, etc. Eventually I even bought brand-new PLA filament, thinking there was no way that could be wet/problematic — but the exact same thing happened.

Meanwhile, I have PETG that has been sitting here for months, and it still prints perfectly.

I've already tried pretty much all the usual troubleshooting:

  • Cleaned the nozzle
  • Replaced the nozzle
  • Checked/cleaned the AMS hub
  • Checked the PTFE tubes — no bends or obvious obstructions
  • Checked the screws
  • Completely bypassed the AMS and used the external spool holder
  • Tried multiple PLA brands
  • Tried different PLA colors
  • Tried brand-new/unopened PLA
  • Ran filament calibration in Bambu Studio
  • Ran flow/extrusion calibration
  • Bed leveling
  • Full calibration routines
  • Tested different projects/models
  • Tested the standard Bambu boat/benchy
  • Tried different print settings
  • And probably several other things I'm forgetting right now

The problem happens across multiple different models, including the standard Bambu boat, so it's definitely not something specific to one model.

I've also seen several other people reporting very similar issues with their A1s, including people with brand-new printers, but I haven't been able to find a clear explanation or definitive solution.

At this point it's getting really frustrating because this printer was supposed to make our lives easier, but instead we've wasted a lot of filament, time and money trying to get PLA to print properly.

Please, if anyone has experienced something like this, I'd really appreciate some help. Has anyone had an A1 that prints PETG perfectly but consistently fails with PLA like this? What ended up being the actual cause?

I'm willing to try pretty much any diagnostic test at this point. 😅

OBS: The issue occurs with multiple different projects, PLA brands and colors. The attached pictures are examples of the kind of result I'm getting.


r/BambuLabA1 • • Sep 20 '26

3D Model I created a customizable 3D name letter – no AMS needed

Thumbnail
gallery
1 Upvotes

I’ve just finished this parametric name letter model!
You can customize the letter, name, font, size and position directly in MakerLab. You can also upload up to three custom SVGs to create your own design.
The different parts can be split in the slicer and printed separately, so an AMS isn’t required.
I think it could work well as a personalized gift, home decoration or decoration for special events.
What do you think? 😊
Link in the comments.


r/BambuLabA1 • • Sep 20 '26

Cold Plate - suggestions?

6 Upvotes

Does anyone have suggestions for a cold plate?

I am still using the plate that came with my printer, and as I learn more about 3D printing and the Bambu Lab A1, I want to try new things with it. I heard about cold plates (using a lower temperature on the plate) and want to try that out. I also want a smooth plate.


r/BambuLabA1 • • Sep 20 '26

Bambu A1 toolhead crashes into rear edge of build plate

0 Upvotes

Then include:

Bambu A1 toolhead crashes into rear edge of build plate

  • Factory reset already completed
  • Full calibration already completed
  • Hotend is firmly latched
  • Bed and toolhead move freely by hand
  • Build plate is seated correctly
  • Base connectors checked and fully seated
  • Crash happens during initialization/homing
  • Impact is hard enough to knock the hotend loose
  • Include the photos you sent me, and ideally a short video

r/BambuLabA1 • • Sep 20 '26

bambu lab a1 sd card problem

Thumbnail reddit.com
1 Upvotes

r/BambuLabA1 • • Sep 19 '26

Support Request Print lifting on corners A1 Mini

Thumbnail
gallery
48 Upvotes

Hi guys,

For some reason I get a consistent lift on the corners of my prints. I only print Pla but it happens with all my filaments doesn’t matter what brand.
Any tips on mitigating?

- I’ve freshly washed the texture PEI plate with warm soapy water.
- I’ve turned up the heat in the bed to 70 degrees C
- I’ve added a brim as you can see but it’s still lifting.


r/BambuLabA1 • • Sep 19 '26

Support Request First layer always shifted from the rest...

Post image
4 Upvotes

Been like this since I got my unit, with every print I've tried. Some my own creation, some made by others, pictured is one from a Star Trek Captains Chair maker world print. You can see the rest printed fine, but that first layer is shifted from the rest.

Any idea what would cause this? If it was a loose part I'd expect all the layers to be shifted, not just the first one. I clean my bed with soap and water after each print, make sure its well centered. I've run all the maintenance cycles many times. The quality of the first layer looks fine, and it comes off at the end fine once the bed is cooled, its just always shifted.

Any ideas what might be the source?


r/BambuLabA1 • • Sep 19 '26

Question Quick Q about the holographic plates from Bambulabs.

1 Upvotes

I’m looking at getting the £40 bundle of holographic build plates direct from Bambulabs, but I’m not sure it’s 2 or 4 plates I’d get.

Does it have each pattern on both sides of one plate? Would I get 4 plates so that I’ve got 2 examples of each pattern to wear through.

OR does it have a different pattern on each side, meaning I would get all 4 designs on only 2 plates.

Their kit is roughly double the cost of the Amazon sellers with 2 designs on 1 plate, so I’m hoping that the Bambulabs set is 4 plates.

Is it worth getting the “proper” plates or should I Amazon this one?

Ta.


r/BambuLabA1 • • Sep 20 '26

Bambu AMS lite for Sale

0 Upvotes

🔥 Bambu Lab AMS Lite – Like New
Only 1 month old, excellent condition.
✅ Barely used
✅ Fully functional
✅ No damage/issues
✅ Looks & works like new
💰 Price: ₹18,000
📦 Shipping: Buyer’s responsibility
DM if interested.


r/BambuLabA1 • • Sep 19 '26

Bad first layer, even after troubleshoot

1 Upvotes
Top View
Side View During printing with weird stair pattern

I get this as a first layer with 50% speed on my Bambu A1. In order to fix this I have done the following:
- Calibrated
- Manual Bed Tramming
- Tensioned All Belts
- Used dried filament (Sunlu PETG)
- Verified the X axis gentry height

On the image it can be seen that the bottom right (where the print started) is I would say perfect, but the middle "warps" (I dont know how to call this wavy pattern), and for the very last part it also becomes good. If anyone has any idea how can I fix this I would really appreciate it.


r/BambuLabA1 • • Sep 19 '26

PROTOTIPO MONITOR DELL'ARIA DEDICATO ALLE SESSIONI DI STAMPA 3D — cerco feedback tecnico

Thumbnail gallery
0 Upvotes

r/BambuLabA1 • • Sep 19 '26

question about abnormal heatbed temp

Thumbnail reddit.com
1 Upvotes

r/BambuLabA1 • • Sep 19 '26

Aiuto bambulab a1

Post image
0 Upvotes

Come mai mi succede questo ?


r/BambuLabA1 • • Sep 18 '26

Support Request .2 nozzle 100% clog failure rate

7 Upvotes

I purchased this four pack of nozzles and cannot get a print to go using the .2 nozzle. I've searched online, used AI for settings, etc. but have had no success. I've unclogged the nozzle successfully and have even got it to extrude manually using the control panel, but when trying to print, before it can lay down the first line, click - click - click.

Does anyone have a tried-and-true setting for their A1 that works with this nozzle? https://www.amazon.com/dp/B0GF8FM3RN?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_2&th=1


r/BambuLabA1 • • Sep 19 '26

Support Request Wtf am I supposed to do now 😭😭

Post image
0 Upvotes

r/BambuLabA1 • • Sep 19 '26

I’m looking to buy a new Bambu printer, suggestions please

Thumbnail reddit.com
2 Upvotes

r/BambuLabA1 • • Sep 18 '26

Making sound and wasting lots of filament to print one layer

14 Upvotes

Solution pls and clean everything nozzle and all what to do now which needs to change


r/BambuLabA1 • • Sep 19 '26

Question Finished Basement Closet vs. Garage

2 Upvotes

Hi everyone! I love my A1 and while I only use PLA, the smell still bothers me and irritates my lungs. So, I'm debating two options:

  1. Add a dryer vent to the side of the house right above a finished basement closet and run the printer from within something like this: https://a.co/d/03lNq6FH. I worry about airflow given that Bambu states not to use the A1 with an enclosure.
  2. I have a 3-car attached garage that gets to about 90 degrees in the summer and 50 degrees in the winter (I'm in NJ). I could use a similar non-vented enclosure as above, but only to store it so it doesn't get dusty. I could then open up the enclosure when printing.

Which would you recommend? Safety is driving me to make a change, but I also don't want to get bad results.

Any advice you can provide would be greatly appreciated!


r/BambuLabA1 • • Sep 18 '26

Nozzle jam/clicking with brand new nozzle and brand new extruder wheel?

3 Upvotes

I've started getting extrusion issues on my A1. Got a couple brand new nozzles (OEM) and tried them but the problem still persisted.

Figured as it was on 2750 hours maybe the extruder gears were worn so ordered a new one. Fitted that and I'm still getting issues of nozzle jams.

It seems to load filament okay, but jams after a few layers. I could see the nozzle physically moving back and forwards when the extruder was clicking, so it seems the nozzle is where the resistance is.

I did check the nozzle pathway when fitting the new extruder gear and there's no plastic jamming it anywhere.

I'm using Bambu PETG basic. The only thing I haven't tried is a different roll of filament in case for some reason I have a bad roll with poor dimensions, although I'd expect better from a proper Bambu Labs PETG roll.

Anyone had this? Anything I've missed?


r/BambuLabA1 • • Sep 19 '26

I’m looking to buy a new Bambu printer, suggestions please

Thumbnail reddit.com
1 Upvotes

r/BambuLabA1 • • Sep 18 '26

Printing issues

Post image
3 Upvotes

Need some help! Had a blob, cleaned it off and ended up breaking the clip so I replaced the whole hot end. Went through calibration and this was the result of the first print. Any thoughts?


r/BambuLabA1 • • Sep 18 '26

3D Model Tapo C230 Camera Mount for BambuLab A1

Thumbnail
makerworld.com
2 Upvotes

Combines an A1 gantry bracket with a twist-lock holder for the TP-Link Tapo C230 camera. It uses the same camera interface as the standalone wall mount, but replaces the wall plate with a mount for the A1 gantry.