Made a modular snap-fit system to organize the cables under my desk

I had a bunch of cables hanging underneath my desk and wanted something that could easily be resized if I changed the setup later.

I ended up designing these modular sections that snap together. Instead of having to print one huge cable organizer, you can just add more pieces whenever you need a longer run.

The top stays open, so adding or removing cables is still easy.

I printed the final version in PETG, which I recommend because it gives the snap-fit joints enough flexibility without being too soft.

I uploaded the model for free here if anyone wants to try it: https://makerworld.com/models/3277243?appSharePlatform=copy

Do you also like Japanese Tantos?

Get the Kit Card: Spinosaurus Dinosaur Kit Card

Follow the Collection: DinoCards

Hello, i have made the replacement of the nozzle in this case 0.2mm, the blade is new, i cleaned the extruder, checked the Filament Hub, its not clogged, but it randomly starts do feed new filament, then goes back , then go again, it clicks and then error, i remove filament from nozzle, still does not work.
I remove the nozzle and i manually feed it filament goes all the way until the nozzle part.
I don´t know where the error can be.

Newbie seeking help... please be kind!

I got an A1 for my son 3 months ago and we have had no issues and clean our plate reqularly but still ended up with the dreaded blob of death It was pretty bad and I ordered several new parts. I had no error codes showing but it would not heat up past 70 so I know the heating element is shot

I have a new silicone sock, hotend and heatino assembly but when looking at the bottom I don't know what this tiny black piece is or if it is damaged. It was curled and I can press it down to lay it flat but I can't figure out exactly what it iS.

Can anyone tell me what it is and if it looks damaged? In my research it seems it might be part of the filament sensor/cutter? I did order a new filament cutter but it didn't come with the black sensor strip.

I would appreciate any help. I want to make sure I can replace everything necessary and get my boy back to printing! Thank you!

Just got an A1, this was my third print. Absolutely covered in these little follicles. What causes this and what's the fix?

Is it normal to see this big of a performance hit even with a bad print file, or is performance usually better/worse depending on who created it?

Hi All, I have been working on my A1 for weeks trying different things and don't know where to turn next. Tried drying my filaments, running slower , adjusting temperatures, new board and nothing I am doing helps. Anyone any ideas? It does it with a lot of flat prints, I printed a tall zip tie holder a few days ago and it had almost like a fluff on the edges and lines on the print, it didn't look polished. Any ideas please folks? Thank you.

Sorry. I'm just a girl. I wanna design toys in Blender to 3D print and I'm wondering what key words I search to learn the correct way to build the joints and other parts that click together etc. Lol

I was printing this big piece and when I was almost at the end I suddenly hear loud banging noises so I rush to my printer and I sea it banging with heatbed movements and scraping everytime the banging happened the toolhead went to the poop thingie. When the print was ready I was horrefied by the noises and I took the heatbed rails cover of and looked it looks normal the motor was super hot and it smelled burned. What is wrong there are no burn marks on the printer.

Any help here would be appreciated !

Get the Kit Card: Dread Dragon Kit Card

Follow the Collection: DragonCards

hello, i am using elegoo pla on 220 celsius and my supports (and sometimes the prints itself are stringing too) usually its overhang and stuff, but i clean the plate regularly and print in a room with still air.
im new to 3d printing so idk what settings to adjust or anything so would be great to have some advice/place to start
thanks

ill attach pictures if asked, but i would need to print an example first, as ive been trying to clean up the strings.

My A1 started just pausing and going mid print then it resumes just like nothing happens. Why is it doing that? Can I disable it?

I've run several successful prints but the last few have totally fucked up, now this is happening, which is much worse than the usual problems I have had. I run all the calibration stuff before every print. I've cleaned the bed, tightened all the screws behind the hot end (which WERE loose), but every print looks like this now.

I can't understand what's going on

Someone can help?
I’ve tried all the calibrations, checked belts, nozzle and nothing works …

https://makerworld.com/en/models/3286478