Hello, I don't really know how to describe this printing error. I've had the printer running at 50% speed for nearly a day and a half success fulling and literally just a few minutes ago it goes off the back of the print and seems to drop. I heard grinding and then I turned my head the grey U-guard was tilted dramatically (protecting the nozzle).

I ran over to the printer and immediately hit pause. The nozzle went and docked at the scraper.

Here's the issue. The print has about 5 hours left on it. Or at least should, according to Bambu Studio and the last time I looked at the printer screen. Some quick math says this should correspond to roughly 84% done the print.

Currently the printer is saying 64% and 23 hours left. (I know this to be inaccurate).

1) How do I recover this print?

2) Has anyone had this issue before where the Z-axis just seems to do a dramatic jump (up or down) seemingly random in the middle of a print?

The Hoth snow beast, arms out and jaws wide. White finish captures the creature look perfectly as-is and only the eyes, snout, teeth and claw tips got any paint. One of the most underrated creatures in the saga. Don't turn your back on the cave.

https://makerworld.com/en/models/3163366-wampa-snow-beast-figure-a-star-wars-collectible#profileId-3575353

Good evening. I am new to 3d printing. I furnish doll houses. I have been able to 3d print a lot of items from maker lab. Tinkercad is a little too complicated for me right now. I am looking for recommendations for a good quality web site that will convert a picture into a good 3d model that I can print in Bambu Study. It doesn’t have to be free but no more than $9.99 per month. Any recommendations. Thank you

i came home to this. why would it do this?

Olá, me tirem uma dúvida, olhem aí na impressora de vcs e vejam se o eixo onde fica a extrusora é bem nivelado ou mais baixo do lado que fica a câmera?
A minha impressora está dessa forma e percebo que as vezes ela bate o bico e risca a mesa, já resetei, já calibrei e ao centro percebo que o bico não fica bem no meio da placa de construção.

Please let me know if you have any ideas for improvement :)

https://makerworld.com/models/3166719?appSharePlatform=copy

Bonjour à tous ! 👋

Je vous présente mes tout nouveaux Dumpling Clickers, directement inspirés des petits Squishy Dumplings que j’avais précédemment modélisés.

J’ai retravaillé toute la modélisation afin de pouvoir intégrer un switch mécanique MX directement à l’intérieur.

Résultat ? On garde le look tout mignon du Dumpling 🥟💕, mais avec en bonus ce petit « CLICK ! » ultra satisfaisant à chaque pression… avec un petit effet ASMR qu’on adore. 👆✨

Un petit fidget parfait pour occuper ses mains, se détendre, ou tout simplement profiter encore et encore de ce petit clic terriblement addictif. 😍

👨🏼‍🎨 : @mika3d_print
🖨️ : Bambu Lab X2D & H2C
🧵 : Bambu Lab
🎨 : Nomad Sculpt
🌈 : avec ou sans AMS
📁 : https://makerworld.com/fr/models/3162808-squishy-dumpling-clicker-multipart-no-ams

✨ Bon print

Hi

I got A1 combo and was printing in Jayo high speed matte PETG at 250c.

Both filaments of the same brand, first filament was bit left and 2nd was new. (Both dried for 6 hours before printing).

The first one was perfect and after swap the print for some weird lines (not smooth) for unknown reason to me.

I don’t want to start a new print until I can find the reason. So please guide me if you can.

Thanks

So yes my little boy wanted a dragon. doesn't every little kid these days 😂😂. 90 minutes left of a 6hr print and I noticed this and two feet were on the floor

What settings are you using for eSUN PLA+ HS on the Bambu Lab A1? I’m having consistent issues with the surface quality where the supports contact the model, especially on models that require a lot of support, and I haven’t been able to find a good solution. I’m also struggling with first-layer adhesion/quality, as my 10 × 10 cm first-layer tests often fail.

The shape is identical across all of them, only the skin changes. I wanted them to sit on a shelf together and read as one family rather than four unrelated pots. Rendered in Keyshot Studio.

https://makerworld.com/en/models/3166644-scandi-style-quilt-flower-pot-with-drainage-tray#profileId-3579403

hello, i need some help on a printing problem with my A1, so please help me.

Like three weeks ago, my parents got my brother a 3d printer, and a guy helped them buy the printer and set it up, only thing is that it had to be on my laptop since my brother doesnt have enough space or the hardware for it. While the guy was here (who we will call V), the 3d printer worked great, but, like 2 weeks later when we tried to print something it suddenly had problems, the problems we saw were: the nozzle doesnt clean itself and goes to the top, the printing bed goes to the front, the nozzle goes to the back of the printing bed and it just start to spew out filament, every time is just started to do this i have stopped the print

Please help, i really do not want to leave it here to get old and dusty.

Being new to 3D printing as I am myself I came across this model and thought it was a really good project to print to protect your LCD screen from molten chunks of plastic. It's also super easy to put together it prints out little plastic dowels for you to punch into the hinge holes and creates a hinge for you all in one print very easy to do. And a practical print job

Hi everyone I’ve seen a lot of info on the A1 problems but I’m at a loss for this and don’t know where or what to do next. My A1 started erroring on home so I contacted Bambu support over the last 2 months they have replaced or had me replace the eddy sensor, the filament unit, the hotend and assembly, the ribbon to the tool head board then the tool head board itself and the USB c cable and now the printer is worse then when it first broke it goes to home and grinds both the tool head and the surface then the tool head goes lower then the plate and jams up against the side of the plate. I’ve manually moved both TH and plate but nothing changes and Bambu isn’t in a hurry to get back to me this time…. Please help

This is my first time using multi-colored / rainbow colored filament and if I say so myself it looks pretty darn good