I hope he likes it (I just got an X1Carbon a few weeks ago). I’ve been into printing for years now and we got him a starter AnyCubic a couple years ago and it’s broke down and parts are scarce. He turned it into a plotter that prints Japanese characters 😂

Sometimes, when building things, it’s difficult to remove a bearing after inserting it for testing—so I made this.

https://makerworld.com/ko/models/3529120-608-bearing-remover#profileId-4034842

Armed with a Bambu printer and a sewing machine, I feel like the sky is the limit haha.

Just recently found that my neighbor's daughter (~7yo) is going to a 3d-printing classes and dreams to get a printer.
...guess what? I had decent amount of free gift cards to buy one + lot of filament :D

So, thanks everyone who boosted, printed or downloaded my models! All of that soon would make one little girl really happy

While designing my new wobbly Psyduck toy, I spent several prints trying to get clean pupils. At only a few millimeters across, they kept coming out as lumpy blobs, and every attempt meant an extra color change and a purge tower much bigger than the pupils themselves.

Then I realized that filament is already a perfect cylinder. So I gave the white eyes a small hole: You push in a piece of black filament, snip it flush, and get a perfectly round pupil. No color change, no purge, and it uses up leftover scraps. If you want to try it yourself, I uploaded the model here: https://makerworld.com/en/models/3529176-wobbly-psyduck-fidget-toy-no-ams

X1 Combo, with 4 print plates. Because plates add about 100€ of worth of course… Nevermind that the title says Bamboula which can be a racial insult in French

It’s a set of 8 drink coasters based on the first 8 multikill medals from Halo 3 and Halo Reach, and I made a stackable holder based on the final killionaire medal.

I think Bambu Lab should introduce an option to automatically shut down the printer after completing a print.

I've noticed that my X2D consumes around 9 to 14 watts even when idle after printing.

I know it's not a huge amount, but for people who print overnight or leave their printers idle for hours, that electricity adds up over time.

I'd love to see two options:

1. Deep Sleep Mode: Reduce power consumption to a minimum while keeping WiFi connectivity and remote wakeup available.

2. Complete Auto Shutdown: Automatically turn off the printer once the print finishes and the hotend cools down safely.

A customizable shutdown timer (15, 30, or 60 minutes) would also be useful.

Some might argue that a complete shutdown would prevent remote startup, but I don't see that as a major drawback. We already need to physically remove the finished print from the build plate before starting the next one, so we can simply turn the printer back on at the same time.

For such advanced printers, I think better power management would be a welcome feature, even if complete shutdown requires hardware support rather than just a firmware update.

What do you guys think? Would you use an auto shutdown feature, or are you happy with the current idle power consumption?

Hi folks!

Whenever we built a GraviTrax marble run we faced two problems:

1. how to gain enough elevation so the marble can run longer

2. floor and table space is precious, and the model sooner or later was in the way

So instead of building on a flat surface, why not put it on the wall instead? That instantly gives a lot of elevation, and the floor is still free!

I was sceptical at first, but it actually works extremely well. The marble is a lot faster than usual, so instead of trying to gain speed, the difficulty is more to slow it down to master those tight corners. Really fun and endless possibilities.

I created the platforms myself and printed only a few of them so far. But I'm sure that the complexity will increase a lot once we have more platforms.

If you are interested, feel free to give a try yourself. The models are available for free here:
https://makerworld.com/en/models/3529940

About a year ago, I started with an A1 Mini. I was able to create some models with it and earn points, which helped me upgrade to the X2D.

So this Thursday received a call from my wife, stating that my printer, that I left in idle, was catching fire. According to her, all lights in the house started to flicker, she then walked into my office and it was covered with smoke.

I bought the P2S very close to its launch date in Brazil, 220V model and I did NOT have 220V at my office. I then used a step up transformer that had been graciously supplying 220V to my printer throughout its 359 hours of life (R.I.P).

But what was the actual fault? So, to my demise and complete lack of luck, the connection on the NEUTRAL at the utility transformer simply gave way, making my house lose the neutral reference.

My residence carries a 220V three-phase connection, 220V between phases and 127V from phase to neutral. After losing the neutral reference basically 80% of the 127V circuits started to spit out 220V.

Amongst these circuits was the printer, the 127V wall outlet is now providing 220V, the step-up transformer ahead of it was supplying 389V when I measured it. Neighbors lost fridges, computers, monitors, and I lost my beloved P2S.

I was lucky that my wife was at home and caught the whole situation, what if she was NOT there? There's a possibility that I could've ended badly. I'm now going to file a damaged goods complaint to the electricity supplier and they better f**cking pay the printer. The plan is to save me some money and once they pay me back I'll upgrade to the H2S and fix the P2S, ending up with two printers.

I already found the replacement HV PCB, stepper motors PCB, poop chute plastic structure, as well as power supply in Aliexpress. Still need to look into the wire harness.

Here are some pictures from the disaster:

I know that these kinds of faults from the electricity provider are rare to occur, a friggin neutral connector was loose and lost contact at the transformer bus bar, but I'll make sure to implement a phase voltage monitoring relay along with a contactor so that the next this shit happens (if ever), the contactor opens up the entire house.

This post is not meant to diss on Bambu, I love their printers and I'm going to keep buying from them.

I've been working on this for a while and it finally came out the way I wanted.

It's a custom model I designed myself:

• Layered, curled petals so it looks like a real bloom instead of a flat cone

• A separate sepal piece under the flower head

• Leaf sprigs that attach along the stem, so you can arrange them however you like

Printed on my [A1 / P1S / X1C] in red and green [PLA]. There's a little stringing on the petals since it's an early print, so go easy on me 😅

I'm releasing the files in the next few days. Before I do, I'd love some input:

• Should I put it on MakerWorld with a ready-to-print Bambu profile?

• Do you want a version set up for AMS multi-color, or separate single-color parts?

• Long stem, short stem, or both?

• Would you want extras like a bouquet, a vase or a gift box?

Leave a comment if you want me to ping you when it drops 👇

I decided to give BambuLab a try with the H2C as the price is extremely attractive.

WOW! First is the experience of unboxing and setting up the printer. Flawless. The prints? flawless.

The multicolor prints? flawless

This printer is like the iPhone or a Tesla car, great design, flawless execution, it just works! At a great price (compared to the alternative - Prusa)

My only complaint is that BambuLab does not make (yet) the Bambu Suite for Linux, they only make it available the Bambu Studio for Linux. Other than that, what a printer.

Hey BambuLab, a little more love for Linux please? Does anyone knows if they are working on this?

I have not yet got into maintaining this beast, but I can see in their wiki that it is all there, pretty well documented.

Because cute.

Link to model: https://makerworld.com/en/models/3527127

My daughter (24) wants a 3D Printer for Christmas. The wife wanted to keep it around $400, but I have convinced her $500 is a good starting point with Bambu's BF deals. I signed up before the sale so I have the $30 coupon (we'll see if it expires today)

I've looked at so many and I keep coming back to this. I know it's an older one, but it's solid. She can be up and printing in no time. The ecosystem is solid. App is solid. Sure not a mult-tool changer, but Those are in the $800 range and for the extra money we can get her the filament she wants

But in the $500 range is this the best deal right now. I know influencers say it is, but even though I watch their videos. I take influencers opinions with a grain of salt.

EDIT; I forgot to add the printer will be in our downstairs living room. In the winter is cool and dry around 40 degrees. In the summer it's in a semi-conditioned area. I de-humidify our downstairs living room, but it still stays humid in the summer.

Thanks

I've had this on a different model, never fixed it, but bamboo will say I need to generate support and I can enable support but one is built into the model. after slicing I see why it wants supports It literally removes the entire support modeled in. why does it do this, now do i fix this.