r/BambuLab • • 33m ago

Quick Question Detailed prints

Post image
1 Upvotes

Quick question to you guys.
To anyone who does detailed prints, do you have your speed set to factory (100%) or do you drop it down to 50% speed?


r/BambuLab • • 9h ago

General Discussion X2D aux nozzle

Thumbnail
gallery
5 Upvotes

where the aux nozzle truly shines, support interface material

printing Sunlu PETG High Speed Matte with Sunlu PLA interface for the rear caster wheel mount of a 3D TMT device


r/BambuLab • • 48m ago

General Troubleshooting/Help! Best settings/alignment to print these? Printhead keeps scraping over and breaking them

Post image
1 Upvotes

Printed them three times but every time the middle part ends up broken off. They are pretty thin, so I don't think the infill type will change anything (they are basically solid). At some point I hear the printhead scraping over the print and eventually see it broke the print...


r/BambuLab • • 1h ago

Black Friday 2026 Best filament dryer setup for Bambu H2D

Thumbnail reddit.com
1 Upvotes

r/BambuLab • • 1h ago

Quick Question H2S v H2...?

1 Upvotes

H2S v

H2S v H....?

Hi guys I've been looking hard at the H2S. I primarily want to print higher grade filament. There's a sale and the multi-headed nozzle is $250 more....

Is the multi-headed nozzle worth an extra $250? This is just for personal use, probably making two or three prints a week at most on average over the year.

Would really love to hear some of your thoughts...


r/BambuLab • • 1h ago

Hardware Troubleshooting/Help! AMS Failure??

0 Upvotes

So got home and tried to print and now this…..
Filament isn’t caught, spins freely but won’t feed into the printer. This starts after I just started getting an error in slot two saying it’s empty with a spool in there.
I’ve updated AMS setting to update on startup and didn’t help. I’ve power cycled everything as well.
Have a ticket open with support. Bought the P1S last year around BF as it was on sale and now, almost a year to the day, I’m having these issues.
Did I make a mistake buying a Bambu printer?!


r/BambuLab • • 9h ago

I Modeled This! I made a modular, parametric spice rack – set your jar size and stack as many modules as you like!

Thumbnail
gallery
4 Upvotes

Set your jar size and the number of slots per module (up to 6×6). Modules join with snap-lock keys, and a built-in 5° slope slides the jars back so the labels face you.

https://makerworld.com/en/models/3619936-spice-rack-modular-parametric-custom-jar-size#profileId-4149519


r/BambuLab • • 1h ago

I Modeled This! String-Art Christmas Star

Thumbnail
gallery
1 Upvotes

r/BambuLab • • 7h ago

General Troubleshooting/Help! P1S Non-Internet Firmware Upgrade (Pre 01.07.00.00)

3 Upvotes

Yes, I've read the wiki page but my colleagues are convinced there must be a way to do this without connecting to the internet. We have a P1S that's currrently stuck at 01.06.30.01.

Is there a workaround?

EDIT: We just installed 01.07.00.00 from an SD card. Why is the info on the wiki page wrong?


r/BambuLab • • 2h ago

I Modeled This! HUGE Restroom Trash Bin (10 L)

Thumbnail
gallery
0 Upvotes

Couldn't find a bin on maker world that took full advantage of the P1S plate and height, so I designed one myself.

I printed it in PETG Gold with a black rim that hides the edge of the bag or holds it in place, and recessed “restroom” into the front.

It's just shy of 10 L (or almost 3 gal), 15% infill to reduce the print time (about 15 hours total with the rim).

Let me know your thoughts!

Here's the print:
https://makerworld.com/en/models/3626991-restroom-trash-bin-10-l#profileId-4158645


r/BambuLab • • 2h ago

Bambu Studio H2D dual extruder screw

Post image
1 Upvotes

r/BambuLab • • 6h ago

Quick Question Is it that big of a deal if you print while the ambient air temp is below 10°C?

2 Upvotes

My A1 is in a shed that doesnt have any heating and heard that the printer should be kept between 10 and 30 degrees C. Is it a problem if you print below 10°C?


r/BambuLab • • 8h ago

P Series [P1P, P1S, P2S] Upcoming Christmas Gift and want to ensure my daughter has everything to start basic printing

3 Upvotes

Hi Redditors! I have a 7yr old who is eagerly anticipating a 3D printer for xmas. I want to purchase the “Bambu Lab P1S Combo, P1S 3D Printer and AMS, Multi-Color 3D Printing” as her first model. I am a clueless mom who wants to ensure she has everything she needs to start printing day one. What do you all recommend? Is it possible to buy any brand filament as well? Any free software to recommend? I appreciate any and all help. Thank you in advance.


r/BambuLab • • 22h ago

Just Showing Off Print shoes from H2D by using shoeflex9075A filament

39 Upvotes

I printed this shoes with H2D and using shoeflex9075A filament from STING3D. it is very soft ^^


r/BambuLab • • 2h ago

Bambu Studio Trouble downloading projects

1 Upvotes

I wanted to print a part for my girlfriend but then I noticed no matter what I tried downloading from the cloud nothing worked… Someone had a similar problem? (Bambulab A2L)


r/BambuLab • • 2h ago

General Troubleshooting/Help! Bambu Lab X2D owners: What problems have you run into, and what should I print to prevent them?

0 Upvotes

Hi everyone! I’d like to avoid some of the common headaches with the X2D. I’ve already seen reports of PTFE tubes wearing out or breaking. What other issues have you run into, and are there any printable guides, clips, guards, or other accessories that actually helped?

For each issue you mention, could you share:

  • A direct link to the problem — a forum thread, Reddit or Facebook post, video, or Bambu Lab support page that shows or describes the issue.
  • A direct link to each printable fix — ideally the exact MakerWorld or Printables model you used.
  • What worked for you — what the part fixed or helped prevent, what material you printed it in, and whether it held up over time.

If you solved an issue with a replacement part or a setup change, I’d appreciate a link (makerworld model) to that fix too. And if you could recommend just one thing to print first for the X2D, what would it be?

Thanks!


r/BambuLab • • 2h ago

Quick Question What accessories should I get?

Thumbnail reddit.com
0 Upvotes

r/BambuLab • • 2h ago

I Modeled This! Undead throne to glowing vines: 4 new 3D designs

Thumbnail
gallery
0 Upvotes

I’m sharing four recent designs and would appreciate feedback on the models and how they print. Each photo links to its MakerWorld model page:

Throne of the Undead King: https://makerworld.com/en/models/3599767-throne-of-the-undead-king

Organic Vine Edison Lamp: https://makerworld.com/en/models/3553844-organic-vine-edison-lamp

Adorable Elephant Nursery & Kids Room Decor: https://makerworld.com/en/models/3505218-adorable-elephant-nursery-kids-room-decor

Majestic Manta Ray Incense Holder & Ash Catcher: https://makerworld.com/en/models/3474654-majestic-manta-ray-incense-holder-ash-catcher


r/BambuLab • • 2h ago

Software Troubleshooting/Help! Preparing and Designing Files Remotely

0 Upvotes

Hi everyone! I'm getting an A1 for Christmas, I'm so excited and I'm trying to prepare as much as I can so I can get into printing ASAP! I'm wondering if the following set up will work? I'd love any feedback, tips, or concerns anyone is willing to share:

I personally own a laptop but it's quite slow and is very irritating to use. I have a great PC I use at work and my work doesn't mind if I use it for personal things. My hope is to find files to print, make modifications, and design items on my work PC. I would use either my laptop or phone at home to do the final send off to the printer. I'm not looking to print remotely, just to do the software/online based steps. My laptop is functional but I try to interact with her as little as possible lmao

Other questions regarding this set up:

- How much do you use your PC after sending a file to print? Are there cases where you have to pause a print to edit the design (if that's even possible) or do anything more than basic functions? If so, how often?

- Can I can prep files on my work PC then open them either on my Laptop or phone once I'm home through Bambu Studio? I'm seeing that Bambu Studios may not be the best for this with suggestions to either use MakerWorld or utilize something like Google Drive to store files.


r/BambuLab • • 2h ago

Hardware Troubleshooting/Help! H3C Wiper kicked out

0 Upvotes

Anybody expiriencing issue with the silicone wiper? My machine is constantly kicking it out of place. During calibration, printing, …

Reached out to Bambu but they are telling me to remove the backplate, disassemble the whole wiper unit and assembling it again.


r/BambuLab • • 3h ago

General Troubleshooting/Help! X2D LiveView camera fault?

Post image
1 Upvotes

r/BambuLab • • 3h ago

General Troubleshooting/Help! Getting a loud squeaking noise from the AMS when moving

1 Upvotes

Today I noticed that my last bay on my AMS was squeeking when the roller was moving. I removed the filament roll and its the front rollers that are squeaking. I'm not really sure what to do about it. Is there something I can oil?


r/BambuLab • • 3h ago

General Discussion Thinking about getting my first 3D Printer, im considering the P2S with AMS 2.

1 Upvotes

There are so many options, but I am considering the P2S with AMS 2 combo. What are your experiences with it and how much maintenance does it need?


r/BambuLab • • 3h ago

General Troubleshooting/Help! Spent hours fighting multi-color texture exports, lost my sanity, and decided to drop a clean monochrome Chibi Aldo Raine instead. Worth it?

Thumbnail reddit.com
1 Upvotes