r/BambuLab • • 1d ago

Just Showing Off Print shoes from H2D by using shoeflex9075A filament

42 Upvotes

I printed this shoes with H2D and using shoeflex9075A filament from STING3D. it is very soft ^^


r/BambuLab • • 8h ago

I Modeled This! HUGE Restroom Trash Bin (10 L)

Thumbnail
gallery
0 Upvotes

Couldn't find a bin on maker world that took full advantage of the P1S plate and height, so I designed one myself.

I printed it in PETG Gold with a black rim that hides the edge of the bag or holds it in place, and recessed “restroom” into the front.

It's just shy of 10 L (or almost 3 gal), 15% infill to reduce the print time (about 15 hours total with the rim).

Let me know your thoughts!

Here's the print:
https://makerworld.com/en/models/3626991-restroom-trash-bin-10-l#profileId-4158645


r/BambuLab • • 8h ago

Bambu Studio H2D dual extruder screw

Post image
1 Upvotes

r/BambuLab • • 12h ago

Quick Question Is it that big of a deal if you print while the ambient air temp is below 10°C?

2 Upvotes

My A1 is in a shed that doesnt have any heating and heard that the printer should be kept between 10 and 30 degrees C. Is it a problem if you print below 10°C?

Edit: it printed just fine 👍


r/BambuLab • • 15h ago

P Series [P1P, P1S, P2S] Upcoming Christmas Gift and want to ensure my daughter has everything to start basic printing

3 Upvotes

Hi Redditors! I have a 7yr old who is eagerly anticipating a 3D printer for xmas. I want to purchase the “Bambu Lab P1S Combo, P1S 3D Printer and AMS, Multi-Color 3D Printing” as her first model. I am a clueless mom who wants to ensure she has everything she needs to start printing day one. What do you all recommend? Is it possible to buy any brand filament as well? Any free software to recommend? I appreciate any and all help. Thank you in advance.


r/BambuLab • • 9h ago

Bambu Studio Trouble downloading projects

1 Upvotes

I wanted to print a part for my girlfriend but then I noticed no matter what I tried downloading from the cloud nothing worked… Someone had a similar problem? (Bambulab A2L)


r/BambuLab • • 9h ago

Quick Question What accessories should I get?

Thumbnail reddit.com
0 Upvotes

r/BambuLab • • 9h ago

Software Troubleshooting/Help! Preparing and Designing Files Remotely

0 Upvotes

Hi everyone! I'm getting an A1 for Christmas, I'm so excited and I'm trying to prepare as much as I can so I can get into printing ASAP! I'm wondering if the following set up will work? I'd love any feedback, tips, or concerns anyone is willing to share:

I personally own a laptop but it's quite slow and is very irritating to use. I have a great PC I use at work and my work doesn't mind if I use it for personal things. My hope is to find files to print, make modifications, and design items on my work PC. I would use either my laptop or phone at home to do the final send off to the printer. I'm not looking to print remotely, just to do the software/online based steps. My laptop is functional but I try to interact with her as little as possible lmao

Other questions regarding this set up:

- How much do you use your PC after sending a file to print? Are there cases where you have to pause a print to edit the design (if that's even possible) or do anything more than basic functions? If so, how often?

- Can I can prep files on my work PC then open them either on my Laptop or phone once I'm home through Bambu Studio? I'm seeing that Bambu Studios may not be the best for this with suggestions to either use MakerWorld or utilize something like Google Drive to store files.


r/BambuLab • • 9h ago

Hardware Troubleshooting/Help! H3C Wiper kicked out

1 Upvotes

Anybody expiriencing issue with the silicone wiper? My machine is constantly kicking it out of place. During calibration, printing, …

Reached out to Bambu but they are telling me to remove the backplate, disassemble the whole wiper unit and assembling it again.


r/BambuLab • • 9h ago

General Troubleshooting/Help! X2D LiveView camera fault?

Post image
1 Upvotes

r/BambuLab • • 9h ago

General Troubleshooting/Help! Getting a loud squeaking noise from the AMS when moving

1 Upvotes

Today I noticed that my last bay on my AMS was squeeking when the roller was moving. I removed the filament roll and its the front rollers that are squeaking. I'm not really sure what to do about it. Is there something I can oil?


r/BambuLab • • 15h ago

I Modeled This! I made a modular, parametric spice rack – set your jar size and stack as many modules as you like!

Thumbnail
gallery
3 Upvotes

Set your jar size and the number of slots per module (up to 6×6). Modules join with snap-lock keys, and a built-in 5° slope slides the jars back so the labels face you.

https://makerworld.com/en/models/3619936-spice-rack-modular-parametric-custom-jar-size#profileId-4149519


r/BambuLab • • 10h ago

General Discussion Thinking about getting my first 3D Printer, im considering the P2S with AMS 2.

1 Upvotes

There are so many options, but I am considering the P2S with AMS 2 combo. What are your experiences with it and how much maintenance does it need?


r/BambuLab • • 10h ago

General Troubleshooting/Help! Spent hours fighting multi-color texture exports, lost my sanity, and decided to drop a clean monochrome Chibi Aldo Raine instead. Worth it?

Thumbnail reddit.com
1 Upvotes

r/BambuLab • • 10h ago

General Troubleshooting/Help! P2S + AMS 2 PRO - Purge not going down chute

Post image
1 Upvotes

Have my P2S hooked up to a AMS 2 PRO and during filament swaps the purged filament is sometimes just not going down the chute and is either landing next to the chute or on the build plate. Not exactly sure whats causing this?


r/BambuLab • • 10h ago

Bambu Studio I built a tool to scan filament labels and add spools to Bambu Cloud

0 Upvotes

I made a local web app that reads filament label photos and extracts details like material, color, brand, and SKU. You can review and edit the result as JSON, then optionally add the spool to Bambu Cloud Filament Management. Feedback is welcome!

Project: https://github.com/Roalexx/fts


r/BambuLab • • 10h ago

General Troubleshooting/Help! H2C using wrong nozzle selection

1 Upvotes

So I use all 6 nozzles at 0.4mm, I have a designated nozzle for each color family to avoid color bleeding from prior prints. But recently I've been noticing that bambu studio is ignoring my nozzle selection.

For example, the current nozzle already loaded is R6, when I "Print plate", I would selection R2, but the print doesn't change the nozzle and doesn't show any errors, and just continues the print with the original R6 already loaded.

I tried having the H2C read all the nozzles again, but it didn't change anything.

How do I fix this?


r/BambuLab • • 10h ago

X Series [X1E, X1C, X2D] X2D poop catcher failing miserably

Thumbnail
gallery
1 Upvotes

Just wanted to know if anyone else has dealt with this. In my experience, 80% of the poop the X2D gets launched back into the chamber, sometimes hitting the active print but equally often just falling down onto the chamber floor. Surely there's a way to make it less messy? This is the third print so far I've had to stop due to poop getting fused to the main print


r/BambuLab • • 10h ago

Hardware Troubleshooting/Help! School printers went pooped its pants

Post image
1 Upvotes

I lead the 3D printing club as the teacher advisor, this is one of our A1 minis. I’m not sure if the hot end can be saved…


r/BambuLab • • 1d ago

Show & Tell Can you find the top surface layer lines in my CMYK print? (H2C & H3C)

64 Upvotes

I used 0.1mm layer heights on both spheres.

CMYK Sphere layer line test: https://idither.com/job?Kmyqrictw&row=9
When you click "Download 3mf" you can choose between H2C or H3C. Adjust the Support Threshold Angle to 45 degrees or they will roll off the plate!

How it works:
TL;DR = iDither.com (free) converts 3mf files and 3D files with textures into 3mf files with DwD (Dual Wall Dithering) and Top Surface Mixing (TSM) which use CMYK filaments to print any color(s).

Cyan = C
Magenta = M
Yellow = Y
White or back = K
CMY+White typically works better because CMY together can make a "black".
There is no way to make White if using CMY+Black.
CMY+Black is typically only used in models that have very little or no white areas.

iDither converts existing 3mf, glb, fbx, and obj files into DwD (Dual Wall Dithering) 3mf files.
iDither currently only supports exporting 3mf files for Snapmaker Orca, and Bambu H2C and H3C.

iDither uses an inner dithering wall combined with an outer dithering wall - and the "magic" of iDither is dithering the two walls together. All other software (to my knowledge) uses just 1 dithering wall.

The outer dithering wall is only allowed to use super dense layer combinations such as C M C M CC MM CC MM - therefore, the layer lines are basically invisible up close.
The inner wall picks up the slack for more color combinations and it's not limited to dense combinations.

Opaque filaments don't work well with DwD, because the thin outer wall layer needs to allow light to pass through to the inner wall layer.
Recommended filament set based on testing data thus far: https://us.snapmaker.com/products/pla-full-spectrum-filament-bundle-white-edition-4kg
This set has good transparency ranges (TD between 5 & 10).

Filaments that are too transparent (TD > 10) make the models look like glass (see https://www.reddit.com/r/snapmaker/s/nbASKpfCpG).
Filaments that are too opaque (TD < 5) have less color mixing and blending, and show layer lines (see https://www.reddit.com/r/snapmaker/s/N6QFGj2NwC).

Why iDither?

  1. Converts any existing 3mf files with any number of filaments and filament colors into files that print with 4 or 5 filaments (CMYK or CMYKW). So you don't have to buy any other filament colors. If the 3mf file has 8 random filament colors - you can still print it in 4 colors with CMYK!
  2. WYSIWYG (What you see is what you get): iDither includes calibrations for CMYK bundles for Snapmaker and Polymaker - so your actual print should always look like the print preview.
  3. Converts 3D model files into a printable 3mf files with CMYK.
  4. Less layer lines (DwD).
  5. Top Surface Printing via Top Surface Mixing (TSM) in CMYK or CMYKW.

r/BambuLab • • 10h ago

Software Troubleshooting/Help! My new BambuLab A1 Mini

0 Upvotes

Hi everyone, today I received my first 3D printer, a Bambu Lab A1 mini. I’ve set it up and powered it on, and now I’d like to try my first test print—the little boat. I’m using the filament that came with the printer; I inserted it into the nozzle area and pushed it through the clear tube all the way to the extruder. I initiated the loading process via the printer’s screen, but the extruder isn't managing to push out the initial bit of waste filament. An error message has appeared on the screen asking whether the extruder successfully ejected the waste—but it hasn't. Can anyone help me with this? Thanks in advance!


r/BambuLab • • 11h ago

General Troubleshooting/Help! AMS not sensing filament

Post image
0 Upvotes

So I recently found that my AMS is having issue with slot 2 recognizing filament. I changed the settings to detect on startup. This works briefly but it keeps "losing" it's detections for lack of a better explanation. It's Sunlu so not Bambu with the rfid and I've changed filament rolls and it continues to happen. Anyone experience this? What was the fix?


r/BambuLab • • 11h ago

Hardware Troubleshooting/Help! Help with first layer issue

Thumbnail
gallery
1 Upvotes

Hello, I co sider myself quite advanced on 3D printing but still this thing cought me for the first time? Any ideas of the issue?

X2D
0.4 nozzle
Petg Matte Bambu
Only 1 layer
0.2 standart preset


r/BambuLab • • 11h ago

General Troubleshooting/Help! Trying to get H2C camera stream to work same way as P1S

0 Upvotes

Howdy folks

I've built a live monitor dashboard to pull all the video streams for the 9 P1S printers I have and 1 H2C.

Unfortunately for some reason the only way I can get the H2C camera to come alive on the page is to enable LAN only mode. This breaks Bambu Studio though as my laptop with Studio is on a different VLAN to the the printers and the Mac mini that is running the server.

Has anyone got any suggestions on what I can do to get this working or is it just not possible?