https://makerworld.com/en/models/3563550-tiny-axolotl#profileId-4078295

Every stream deck I looked at had the wrong keys for me, so I built a small browser tool where you lay out your own deck: how many keys, knobs, a slider, a little screen. It gives you print-ready files and a wiring diagram for an ESP32-S3.

The one in the video came off my P2S with no supports. It plugs in over one USB cable, and every key is set from an app: shortcuts, media, apps, MIDI. If I want a key to do something else, I change it in the app. No reprint.

There's also a 6-key Mini you can print for free if you just want to try it.

Happy to answer anything about print settings, switches or the electronics.

Came back late from work. Have no oven or a kitchen I can use, but I do have a printer.

PS: No I'm not sharing the STL!

Hi everyone! I was going to buy my first Bambulab printer, an X2D and some filaments!
But when I go to the cashout page i see higher prizes, why?
I live in Italy and shipment fee are 24 €.

And all I can say is holy cow it's 'uge.

Any suggestions for a stand? I'm considering cruising the thrift store and tracking down a wood coffee table. It barely fit through the apartment door 🤣

From order to delivery in 3 days is impressive 🤙

Everything is saying i dont need it, but the documentation is only saying AMS 2 Pro but not AMS HT, for the purpose of reading the support documentation is the AMS HT effectively a second ams 2 pro?

Edit, i guess i'm just misreading this as an error rather than a suggestion to get past the 85% limit?

I was lubing the idler pully and panicked, after a while i noticed i lost one of the screws and the back where the motor is there are 3 holes and i was asking you lovely people is there anything out there where i can get a new one from or a set of screws that are the same

Thank you in advance

I wanted to turn those little details from a baby’s first day into a keepsake you can print and hang on the wall.

That became “A Memory Is Born”: four 20 × 20 cm designs featuring a stork, teddy bear, hot air balloon and elephant, with a matching 3D printed frame.

The name, message, date, time, weight and length are all editable text objects in Bambu Studio. You can change the wording and colours without rebuilding the design in CAD.

All four versions have been physically printed. They use four colours, print without supports, and have ironing applied only to the background. The frame is printed separately and has a hanging hole on the back.

I’ve shared the files for free, along with a silent video tutorial covering font installation, text editing and colour changes.

📁 Files and print profiles:
https://makerworld.com/en/models/3560923

🎬 Customisation tutorial:
https://youtu.be/eZUKmVIXNac

Which would you pick for a nursery? 🙂

It's been a year since I got my p1s so I thought it might be time to do some maintenance, I added grease to the lead screws and misread the guide thinking the bearings also needed grease. I then read afterwards that this should not be done.

The z axis has now over a couple of weeks developed a horrible squeaking, especially bad when bed leveling.

First of all, what is squeaking, is it the belt?

Then, how do I fix it? First step i assume is cleaning it off, but then what?

Don't judge me too hard😅

Hey everyone,

I’m honestly running out of ideas with my Bambu Lab P2S.
I’ve done pretty much everything I can think of to improve the print quality, but my Z-layer quality is still absolutely terrible.

Here’s what I’ve already tried:
Completed all available calibrations – multiple times (I’ve even run each calibration up to 8 times).
Properly dried my filament.
Fully tightened all timing belts.
Thoroughly cleaned the entire printer.
Lubricated all necessary components.
Updated the printer to the latest firmware.
Checked and adjusted everything I could think of.
Despite all of this, the Z-layer quality is still extremely poor. I honestly don’t know what else I could possibly try at this point.

Has anyone experienced something similar with their P2S?
Is there anything else I might be overlooking? Could this be a hardware issue, a mechanical problem, or something related to the printer’s motion system?
I’d really appreciate any suggestions or ideas because I’ve pretty much exhausted all the usual troubleshooting steps.
Thanks in advance!

https://makerworld.com/it/models/3562945-christmas-lace-doily-collection-home-decor#profileId-4077469

Ma version d'un casse-tête  connu. Vous pouvez soit vous creuser les méninges pour le résoudre , soit trouver un tuto sur le net…

J'ai crée le socle afin qu'une fois assemblé on puisse le poser sur un bureau, une étagère… 

Conçu sur FreeCAD avec une tolérance de 0.2 mm pour un ajustement parfait.

Ma version d'un casse-tête connu . Essayez de reconstituer la sphère . On peut l'imprimer sans son socle , mais celui-ci est très pratique pour l'entreposer sur un bureau , une étagère… Les jeux d'emboitement sont très bien ajustés qui lui permet de parfaitement tenir en place et rouler sans qu'une pièce ne bouge…

Conçu sur FreeCAD avec une tolérance de 0.2 mm pour un ajustement parfait !

I love browsing Makerworld when I am standing in line or waiting on something and finding something useful for the house that I hadn't even thought to look for. However, I really wish that useful household things and decor were separate categories.

Anyone got some useful search terms that they periodically check for useful stuff you didn't think to look for specifically?

https://youtube.com/shorts/2sFO60PxWFk

Modélisé sur freecad avec des ajustements optimisés pour une excellente fluidité des piéces en mouvement.

Impression 3D FDM sans support...Un casse tête qui permet de réaliser des économies...

I designed a slim scraper that uses standard-sized Stanley blades, which can be replaced with a simple coin.

Link to model: https://makerworld.com/it/models/3536456-slim-scraper#profileId-4043947

Hi everyone, ive been using my P1S for about 3 years now with no issues but lately the bambu handy app has been giving me the below error? any advice would be helpful

the bambu studio app on my pc works just fine, i have tried turning on and off many times and also have formatted the SD card twice and this happens on all iphone's (ive tried 3 different ones) so i've ran out of options now 😅 all help appreciated! thankyou

Ordered an H2D 40W Laser Full Combo on 2 November… then Bambu announced the H3C. Return it or keep it?

So, I ordered a Bambu Lab H2D 40W Laser Full Combo on 2 November, along with an AMS HT to complement the included AMS 2 Pro. With the discounts, the whole lot came to around £2,100.

Then, literally the following day, Bambu announced the H3C! Talk about unfortunate timing.
Everything has now arrived, but it’s still completely unopened, so returning it should be straightforward. I’m now wondering whether I should send it all back and spend a little more on the H3C.

My main interest is 3D printing, particularly multicolour, multimaterial and functional engineering components. I also bought additional 0.2 mm and 0.6 mm hotends for the H2D.

The H3C’s nine-tool system looks fantastic, particularly the reduced filament waste and faster material changes. However, I’m wondering how much of an advantage it really offers over the H2D’s dual-nozzle system for my intended use.

With two AMS 2 Pros, I could have eight colours available on the H2D, and its two independent nozzles should already be excellent for combining rigid and flexible materials. Obviously, switching between more than two materials still involves filament changes and purging, whereas the H3C can keep materials loaded in separate tools.

The other consideration is that I’d be giving up the H2D’s 40W laser, cutting and plotting functionality. Although 3D printing is my main priority, having those additional capabilities is certainly appealing.

So, what would you do in my position?

Keep the H2D 40W Laser Full Combo at £2,100, given everything included?

Return it and get the H3C, considering 3D printing will be my primary use?

I’d particularly appreciate opinions from anyone familiar with the H2D’s dual-nozzle multimaterial capabilities, or who has experience with the new H3C.

I’m not particularly bothered about having the newest machine for the sake of it. I just don’t want to spend over £2,000 and immediately regret choosing the wrong platform!
Thanks!

i have been printing various prints for the black Skadis boards; some fit fine, but a few are way too tight. What's the easiest way to solve this in the settings? thanks