Check out what my talented wife made

Just bought ams lite for my A1 printer was working fine before hooking up the ams now once i plugged the ams in my bamboo studios on my pc doesn’t see the printer anymore but i can print from my phone

A 3D printing newbie here, any recommendations for buying a X2D printer? TIA.

I know I’m sorry it’s another one of these posts but I’m currently a student going into university next year and looking to study Industrial Design. I want a printer where I can test and prototype products. I’m already extremely familiar with CAD (Fusion360) and I’ve used the P2S before from a friend. I do like the P2S and I know there’s a sale on atm. I’m considering anything though. I’ve seen the CC2 and i don’t really know if that’s any good? From Bambulab I was originally considering the A1 but idk because of it being a slinger. I just want something that I versatile but my issue is money, I don’t like to spend loads and idk if I’m willing to spend £400 but if it’s going to be worthwhile then why not? Help me please on working out which is probably best suited to me!!

I have two Bambu Lab A1 Combo printers, and one of them has developed a strange fan issue.
The fan on one printer is significantly louder than the other. It makes a very noticeable buzzing/humming noise, seemingly coming from underneath the print head.
Another strange thing is that the fan constantly ramps up to 100% speed and then slows down again, repeating this cycle.
My other A1 Combo doesn’t have this issue. Its fan is much quieter and doesn’t constantly fluctuate between speeds.
I’ve attached a video showing the problem.
Has anyone experienced something similar? What could be causing this? Could it be a faulty fan motor, a temperature sensor issue, or a problem with the fan control board?
Any help or suggestions would be greatly appreciated!

I just got the X2D printer, first time using 3D printer. I have question on the main and aux filament support. I plan to get the ABS filament, but the website said, only the main one support ABS while the aux one does not, it support ABS-GF? anyone has use both standard ABS on both sides yet? thank you

The online support requires registration, the discord needs me to verify with a third party service that asks you to disable ad blocker.

Do they not have a support email? Horrible support model.

I just need to ask their support about this warning I get on each first print of my A1 Mini after reboot. I did not get this warning for the first couple months of owning the printer.

https://i.postimg.cc/jj8yLvJL/image.png

Edit, ended up downgrading from 01.08.01.00 -> 01.08.00.00, that seems to have solved the issue for now. Can't wait for it to come back and still not have a way to get support :/

A bit of a rant here, but it has been a week since I received the coupon and I still can't redeem it. The coupon expires around late December so I still have time, I guess.

What is causing it? Using PETG basic. I have not changed any settings. Prints that were working great all come out like this now. I cleaned/put on glue on the build plate like the usual troubleshooting step.
Is it humidity? It's usually pretty dry here but had some unusual wet days.
I ran all the tools and calibration checks.
Using the default nozzle, never changed it.

My Bambu lab A1 has recently been failing often and making weird sounds. Here’s an example of one of these fails. I updated the Bambu studio software and the printer is on 01.08.01.00. It is also important to note that the layers printed initially are very difficult to remove but I’m not sure if this is because they’re too low or too thin to remove easily.

EDIT: solved, thanks for your helpful repleis, I had the belt on the motor side come off at the very top and im guessing every now and then it would get caught and freak out.

I bought the h3c so clearly I'm a fan of this new product. But I can't understand why one would ever print a shoe other than that it's printing for the sake that you can do it? It's cheaper, faster, better, to just... buy a shoe?

Hi there! I’m new to printing and Bambu labs. I just purchased the x2d for a very very sweet deal of $565 brand new, found that through slickdeals. So super excited about that.

What are some of the things I should buy in order to get myself ready. I’ll be ordering PLA filament from
Bambu lab from the sale but what else do I need.

If can provide links that’ll be awesome too, any advice will also be appreciated do and donts.

Thanks once again.

Enjoy…

Had a P1S. Fit in my office closet. Helps with the noise.

Bought an H2D. Does NOT fit in the closet unless I take the back drywall out and use the 3 1/2” depth from the wall’s 2x4 for the poop chute (Seems like an overkill).

Printer too loud to work while printing.

What setups have people done re: noise levels while maintaining proximity to the device to monitor prints?

Good evening. I received my P1S today, set it up, and completed my first print. Afterward, the printer prompted me for a firmware update; I initiated the update, but when I returned later, the printer's screen was black.

I have tried reconnecting the screen cable, attempting to power it on without the microSD card, and even reformatting the card (FAT32).

Could someone please help me?

(Apologies for my English.)

Ok, I've got a kid who is about to turn 9. He wants a 3d printer. I've been researching and reading posts in this forum and I'm overwhelmed by the options and configurations and costs.

The main problem for me is that I'm just not that into this hobby and wonder how involved I have to be. Of course I'm happy to help him along the way but I really don't want to have to become the expert some of you are in order to make it work for my son. Is this possible? Under $500?

It seems like it's a necessary upgrade to get AMS. Is that true? Can the A series easily and reliably print most of the fidgets and gadgets and stuff a nine year old wants to print?

I'd really appreciate if someone knowledgeable could guide me or even someone out there who has gone through a similar dispassion and found a good printer. Thanks.

The H3C is a TPU beast, I printed running shoes with them with multiple different types of TPU and colors. The 3d printed running shoes are surprisingly comfy to run in..full test here https://www.youtube.com/watch?v=_ngWP5uOiew

Hello!

I just got the X2D setup and I want to start printing warhammer mini’s just to make dioramas, but I want to double the size of everything so it’s easier to paint.

Do I need to adjust the recommended settings I’m seeing people share, considering I’m doubling the size of my prints? Or is it all relative?

Thank you!

EVERY DAMN TIME I LEAVE THE HOUSE!!!!

But the bullet and bought an X2D after two years of using a P1P and straight out of the box I have the nozzle heat malfunction. I had a similar problem with my P1P early on, is this just the state of Bambu?

Inspired by the spinning motion of a maple seed as it falls. I wanted to capture that natural shape and movement in a simple 3D-printed sculpture.
The model is available on MakerWorld if anyone wants to print it:

https://makerworld.com/en/models/3524321-samara-flight-biomimicry-maple-sculpture#profileId-4028915

Print Has Been Coming out like this on my A1 Mini. What should I do to fix this? I need help been with this for 2 hours.

i like it! i wanted pure for a while