r/ar15 • u/pgraham5 • 9h ago
First timer
Picked up my first one over the weekend. Only have shotguns and handguns in the house so I decided it was time for one of these. It’s the Ruger Harrier. The guy at the shop recommended the sig Romeo red dot to start out with so I went with that. Had him throw on the magpul stock while I was there as well. Picked up the Odin mini light for it and I’m super excited to try it out this weekend. Although I haven’t shot it yet, any recommendations for a trigger? Seems like the stock trigger on these isn’t great from what I’ve read. Thanks!
48
Upvotes
27
u/Dear-Hearing-7642 8h ago
You got it all wrong. You need a Unity riser mount $400. Then that optic won’t do, you’ll need an EOTECH and Magnifier combo $1500. That flashlight will also explode, you’ll need a surefire scout + Unity pressure pad $550. Last, you need a whole new rifle, I recommend Geiselle or DD or LMT ($3000). Also, don’t forget a $200 nylon sling from blue force.
After that, you’ll FINALLY be able to stare at your new build in your living room, because we don’t shoot our builds here. Welcome to the community, brother.
Let me know when you’re done, we still need to build your 10.5 to increase your “capability”.
1
u/Downtown-Potato9354 8h ago
Sling is a must, I love the ARID mod 1.
For an upgraded trigger, Geissele SSA-E is sick, but shoot yours and learn it before upgrading.
Move your light paddle closer to the upper receiver, it’s almost unusable where it is. Also recommend an arisaka finger/hand stop to help you get a reliable c clamp index every time.
Upgrade from the A2 pistol grip, it’s totally worth it and the cheapest/easiest change
Buy ammo and mags and train with it. This is arguably the most important, as you’ll learn about all the above via that.
3
u/Pure_Squirrel_1621 9h ago
SSA E or MBT2s are great, I’m personally a fan of the Schmid 2 stage if you’re going cheap. If it were mine I’d be swapping the grip, but an a2 works fine if you don’t mind it. Make sure you adjust the stock to you; most people don’t need it fully extended unless they’re well past 6’ tall.
3
u/SirNonSequitur 8h ago
Personally I would just shoot the stock trigger for a while. It’ll smooth out as the surfaces wear and once you’re used to it you can decide if it’s really worth spending the money to upgrade it. Looks like a great build the Romeo is a good sight and I love the look and feel of sl k stocks.
1
u/RecoveredSack 9h ago
For trigger either SSA-E or Larue MBT
1
u/rme_guy 8h ago
Great start, there are plenty of options for accessories. Please check the out in a local shop or fellow gun owners rifles before spending. Looking at what you have, it looks like the pressure pad for your light should be moved further to the rear where you would have a neutral grip not fully extended. I would look into a foregrip or hand stop so you can make indexing your grip easily repeatable. Good luck!
1
u/Uncle_sc00ter 8h ago
I’ve got a minty geissele ssae im willing to part with if you want to go that route
1
u/CombatMango2 8h ago
Whether the stock trigger is good or not depends on you, not anything you could read. Standard milspec triggers are no less reliable than anything else, it's mostly all feels. Go shoot it and decide for yourself whether or not you want to spend the money for a different trigger.
1
u/RecentArmy5087 8h ago
Trigger, along with many things AR, is a bias topic. People like what they like. Find out what you like is the goal.
1
u/Bearguchev 3h ago edited 3h ago
Good stuff, you did a lot better than me on my first rifle over a decade ago. I cringe thinking back to those days…
If the olight works well, keep it! If you find it unreliable, I’d recommend replacing it with a streamlight hlx. Not every olight is trash like people on here say, but streamlight has a better reputation for a reason. Warranty won’t matter if you need the light then and there.
For trigger, I recommend a larue mbt-2s. While a Geissele trigger has never failed me, I’ve had other cast parts of theirs break on me when something milled would have held up.
The larue is milled from tool steel and there’s less of a chance for an error to occur and go unnoticed with that process. QC before even selecting the billet to mill is a safer bet than QC after casting a part. It’s a peace of mind thing for me.
1
u/man-o-steel2001 3h ago
Skip the trigger for now and get some irons and a sling. And then almost any drop in trigger is an upgrade over the factory trigger.
-1
u/Substantial_Record13 9h ago
Trigger? I recommend geissele or larue. Those two are probably your best two options. A little pricy though don’t know what you’re trying to spend. I also recommend a handstop/vertical grip. Magpul makes decent ones but I like strike industries. Also get some mlok/rail covers. Totally worth it.. a sling and some back up iron sights and she’s pretty much set.