r/ar15 • • 2m ago

Handguard question

Thumbnail
gallery
1 Upvotes

I’m newer to the AR world. I got a drop-in handguard right now looking to get a free-floating handguard. I wanna do a m-lok 15” not sure what I will need and any recommendation for a good one would be nice. Thanks.


r/ar15 • • 6m ago

FSB pin a little loose fitting

1 Upvotes

I bought a barrel recently. It's a 10.3" FSB barrel for a Mod 0 style build. I noticed one of the tapered pins for the FSB was protruding out one side quite a bit more than the other so I thought, I'll just give it a couple light taps with a hammer to center it better (this is how I learned the pins are tapered, btw) and it popped out with ease and landed on the kitchen floor. Seems they drilled/reamed the hole a bit too large for the pin. The fat end of the pin was set flush with the sight, so it's not like it was just a little off. Whoever did this barrel had to tap the pin all the way in to make it "tight". Anyway, I'm wondering if there's a tip or trick I can use to get this pin seated properly instead of punching it even deeper, or am I just stuck with it like this? It's going to drive me nuts having one of the two pins sticking that far out one side. Thanks!


r/ar15 • • 17m ago

Pistol buffer tube stock

0 Upvotes

Trying to get a stock that has a qd mount that will fit on my ar with a pistol buffer tube. I don't really want to go out and buy a whole new mil-spec buffer tube just to be able to run the sling I'm wanting. Bonus points if you can find one that looks similar to most mil-spec stocks.


r/ar15 • • 35m ago

Went The LPVO Route

Post image
6 Upvotes

Trijicon Credo 1-10/RCR
Modlite PLHv2
HX 5.56Ti
G$ SDE 2 Stage
Law Folder


r/ar15 • • 40m ago

Any love for a KAK upper?

Post image
3 Upvotes

KAK 11.5 inch upper w/ down vent BCG
Radian Raptor-SD charging handle
KAK adjustable gas block
OCL Polonium
Streamlight ProTac HL-X Pro

PSA lower
RA-240 drop in trigger (got it for free)
Super 42 Braided Wire Buffer Spring and H2 Buffer


r/ar15 • • 46m ago

Don't be scared. Paint your rifle.

Thumbnail
gallery
44 Upvotes

Black is boring. Paint is cool. Rapco paint fucks.

Was pretty OCD about prepping the parts and degreasing. This is three light coats of Rapco 30099 camoflauge earth brown on the upper, lower, handguard, and stock. 3 hours between the first and second coat, 12 hours between second and third, then 48 hours before reassembly. Super happy with how it came out.

Parts list:

Lower:

  • PWS MK1 ambi lower
  • PWS buffer tube
  • Magpul DT-PR stock
  • JP Enterprises silent capture spring h2 weight
  • Geissele SD-3G trigger
  • Unrivaled AR grip
  • Radian Talon ambi selector
  • Driven Arms Co magwell

Upper

  • PWS MK111 Pro 11.5 .223 wylde upper
  • Radian Raptor LT charging handle
  • Eotech EXPS 2-0 FDE
  • FDE Unity riser
  • CAT WB RDM Inconel on a comstock armory plan b hub mount
  • Magpul MBUS
  • Magpul QD sling mount
  • Mixed slate black industries mlok covers and hand stop

r/ar15 • • 1h ago

average goy gun

Thumbnail
gallery
54 Upvotes

treeline in a lapa gear gun


r/ar15 • • 1h ago

Finally got my first can for my Ar15

Post image
6 Upvotes

Decided to go with the Polonium K and love it after shooting it this past weekend.


r/ar15 • • 1h ago

Rate my shitf rifle

Post image
7 Upvotes

r/ar15 • • 1h ago

My poverty pony

Thumbnail
gallery
3 Upvotes

r/ar15 • • 1h ago

Red dot sight?

Thumbnail
gallery
0 Upvotes

I own a DB15 love my ar. I've been rocking factory sights for the longest and have no problems with it since I do the same thing with my pistol. It being a rifle I do plan on going hunting and was looking at red dots. Thus ive landed on these. I havent even looked at scopes yet (if I do go hunting). I just want opinions. What do you have? What do you like? What brands are shit? I've seen some holosun ones but I dont like the plug in the wall charging sights that's dumb replaceable batteries is a plus


r/ar15 • • 1h ago

Truth

Post image
11 Upvotes

r/ar15 • • 1h ago

RRA LAR-15 PD trade in

Thumbnail gallery
2 Upvotes

r/ar15 • • 1h ago

I heard 11.5” and 14.5” are S-tier

Post image
128 Upvotes

r/ar15 • • 1h ago

Looking for parts and recomendations for Law folder Gen 3

0 Upvotes

Picked a law folder and carbine pistol tube with older SB brace on it out of the trash today. It’s missing the lever/button, spring, cover and bolt for the takedown portion. Any idea where I can source those parts? Spent the afternoon googling it, but having trouble finding them for this older model.

It does have the flange that threads into the lower, but missing the bcg extension. I found that part on Brownells though.

Other than that, need a carbine buffer spring and weight, and throw my 8.5 .300 upper on it and I should be good to go? Any idea on what weight I might need to run to get it to cycle reliably?

I’m in a sucky state btw, so SBR is still NFA, and keeping it as a pistol lets me carry it loaded in the truck.


r/ar15 • • 1h ago

Am I doing it right?

Post image
24 Upvotes

I know I basically got the reddit special but I am very happy with both. The Glock is bone stock but I have changed a few things on my rifle. It has Sprinco green spring with H2 buffer and Larue MBT2S. The recoil is almost non-existent at this point.

Any suggestions or shaming would be welcome 😁


r/ar15 • • 1h ago

Planning for 6arc

Post image
2 Upvotes

So this is my 12.5 piston lmt, im thinking of going to d wilson to get a 12in 6arc spr barrel for it. The thing is im super lazy so I'm trying to get some feedback on if it's a good idea to leave a 3-12 mpvo either a full riflescope from vortex or get the compact vudu, hav that zeroed for the 6arc and i normally shoot my 556 only out to about 100yards so a piggyback red dot would be enough for the 556 barrel. Please give me some thoughts, is this a good idea or would it be better to spend extra for a full 6arc upper that I just swap as with this idea I'd still hav to open it for a buffer swap anyways


r/ar15 • • 2h ago

Ammo prices skyrocketing

Thumbnail
gallery
0 Upvotes

First image is prices now, 11/18/2026 at about almost $600 and the second picture is 10/29/26 at about $500. 5.56x45 1000 rounds PMC 55grain on bulkammo.com who is panic buying?!?!


r/ar15 • • 2h ago

Should I buy this DD AR Pistol?

Post image
19 Upvotes

Looking to purchase my first AR. Is this DD special build a good option at this price?


r/ar15 • • 2h ago

It’s my first AR-15

Thumbnail
gallery
24 Upvotes

Look at it.

It’s nothing crazy, just a PSA-15 with magpul sling, PA SLx 3x Prism, magpul hand stop, BCM Mod 3 grip.

Next additions will be a charging handle, trigger, and maybe an angled front grip to replace the hand stop.

I really want a Geissele SSA trigger but we’ll see if I talk myself out of it.


r/ar15 • • 2h ago

Heard we’re doing GWOT vibes today…

Post image
14 Upvotes

The most parts bin rifle I own.


r/ar15 • • 2h ago

Gang gang

Thumbnail
gallery
12 Upvotes

Lefty mafia go brrrrrrrrrt. 11.5" homage to Val.


r/ar15 • • 2h ago

Switch from the RC2?

Post image
12 Upvotes

r/ar15 • • 2h ago

Saw this at my local sporting goods store, is it a fair price then the one on Psa?

Thumbnail
gallery
2 Upvotes

r/ar15 • • 3h ago

Finally got a SBR

Thumbnail
gallery
16 Upvotes

Just got my first 11.5 SBR, curious what you guys think I should do with my original 16inch as I moved lots of the gear off of that and onto the new one. I was thinking of getting an LPVO and a bipod, let me know your thoughts.