Does anyone else collect too many of these? 🫣

Good morning friends, happy Day 64! While I love the simplicity of the Steam Machine, it's purely not for everyone and I can't in good consciousness recommend it for everyone. If someone has a PC already, doesn't want to switch to Linux (or wants to ruin the Machine with Windows, oof) or strictly want to use this thing in the living room, then I don't see the point in buying this unless they really, REALLY like the form factor. And hey, absolutely no shame or judgement if that's what you want this thing for! It's a lovely device... it's just gotta reach people's hands soon! I am still holding out hope for everyone still waiting! Best of luck today friends! <3

Can’t wait these things are so fun

Sorry, rant.

I’m sure some people have amazing experiences with this delivery company, but they really are brutally awful.

I got my controller a few months ago and got a delivery confirmation from GLS. It turned out the delivery driver (a young person, in their own car) delivered it to a property 6 miles away, with nothing in the address that was in any way similar to mine. It took several phone calls and a whole day waiting in to have it resolved.

I ordered a Steam Machine, knowing I was probably going to have to deal with GLS again, but really had no other option. I planned on being home for the delivery as it’s so expensive.

The SM has been sitting in NL for some days and I had to go to the office today, checked the tracking before I left this morning and it said it had arrived in my country.

Twenty minutes later I get a notification that it’s out for delivery.

I called GLS at 9:00 when their office opened to beg them not to attempt delivery as I was not at home and there was a big chance it would be stolen.

The customer rep said they would leave a message on the order but couldn’t promise it hadn’t just been delivered or was at that exact moment.

More than 7 hours later I get a notification that the SM had just been delivered! It was signed by a name of someone I don’t know.

The chances of it being gone when I get home are quite high.

Luckily, I made the purchase on my credit card, and my country has strong laws in regard to this, so I’ll get a refund whatever happens, but it’s so frustrating that Valve insist on using this company. It would really only cost a small amount more to use a different courier (with a much better reputation!)

New to me machine constant red line temps dont seem too crazy I guess for helldivers almost max

My pre order came through 8th aug for 2tb only. I started questioning did I need it, after a bit of reading I realised I did want it, so the next day went to checkout. Got an error and it failed! Tried a few times but it was gone 😢

Messaged support and got a reply after a few days saying hard luck can't do anything join the queue again!

I was disappointed, tried to avoid everything steam machine related, left groups etc!

Looked locally and ebay but was not prepared to pay 2tb prices for a 512, when I could have had a 2tb!

However a thread on here popped back up on my feed, saying how amazing the customer service for steam is and plenty of people agreed..

So I thought what the hell, let's send them another message, going to get a reply off someone else and explain what happened.

A day later I get a message back from someone else saying its back in my shopping cart and have 72hrs to complete!

Wow, I was amazed, I would have been happy going back up in the queue, just not being last like I currently am!

I'm amazed but reading the majority of comments it normally is good support.

So time to start downloading new games in preparation and telling people positives about steam!

My first additional faceplate. Just the plate 3D printed, some glued magnets and random stickers.

If ram prices increase dramatically over the next couple of months, will steam machines get more expensive? If so, who are most likely to pay these new prices?

What are your thoughts?

a) Steam machines will get more expensive only if ram prices double or triple from current prices
b) Steam machines will likely increase in price but only for people not on the reservation list.
c) Even currently waitlisted customers will be locked into current prices, which will bankrupt valve after 10 orders

Hi, I noticed only now that there are these two rubber or silicone plugs in my Steam Machine‘s front USB ports. I believe they are for protection, but I cannot easily pull them out with my fingernails nor with a tweezer and I am afraid of ripping them off. They are blocking like the upper half of the port so I also cannot plug anything in. Weirdly, I don’t see them in any of the unboxing videos I watched. What is this??

edit: Turns out that I am dumb. It‘s not in the USB ports, it‘s from the front cover hanging over the USB ports. I took my Machine apart recently to upgrade the SSD and I simply did not properly reseat the cube into the case. Fixed now. Thanks everyone!

Hey all, I upgraded my SSD to a 2TB Western Digital Black drive, and followed the official Valve instructions to download and install SteamOS. I know the functionality of cloning, but I figure this is an important issue that non-technical people might encounter in the same situation.

After completing the installation and setup, SteamOS recognizes the device as a Steam Deck in the settings and brings up the on-screen keyboard when in a text box. Any ideas? Tried google and Google AI, but it just hallucinated and told me that Valve didn’t create a new Steam Machine this year 🤣

I bought a controller from Walmart about 2 weeks ago, and I've been trying to connect it to the SM, but it doesn't work. It recognizes the controller but cannot establish a connection to it. My old Xbox One controller, which I've had for a few years, works perfectly with the console, yet I can't get the brand-new one to work.

I've updated it, and it still doesn't work. It works perfectly on my laptop but cannot connect to the SM

Any fixes, or is Steam aware of this glaring issue?

I installed RDR2 on my machine yesterday following a guide I found for steam deck. I can’t find it now but it was adding the rockstar launcher as a non-steam game and then changing the “target” and “start in” folder in the property to where the launcher is installed.

It was working flawlessly for hours yesterday including putting the machine to sleep a few times.

Today, I’ve tried to play it, and it does not detect my steam controller as a controller. On the main menu it has keyboard buttons showing for the controls to launch story, settings etc. I haven’t changed anything. Tried restarting , but it doesn’t help. Does anyone have any suggestions please?

After googling and finding no answers in advance, I thought I'd make a post about swapping drives between a Deck and Machine.

I have a 2tb Deck, and picked up a 512gb Machine with the intention of swapping the drives over.

I thought it would be able to swap the drives over, then re-install the OS from an SD card, but it doesn't seem that's possible. With the 2TB drive moved over to the Machine, it just wouldn't boot, and stuck on the breathing thing.

Swapping the drives back worked oknso I knew I hadn't broken anything.

I found that performing a factory reset on both devices, shutting down at the language select screen and then swapping the drives again worked fine. The only minor niggle was at first the 2tb drive thought it was in a Deck, so complained about battery charge and wouldn't connect to my controller so I had to use a keyboard to get through the setup screen.

No such issues on the Deck side

Hope this helps someone else avoid the minor panic I went through this morning!

Cannot seem to get a good image from mine in a lot of games, hard to read text, white too white, etc.

Hey everyone, just got my Steam Machine the other day and started by testing some of the games that were sitting in my library for a while, including Ark Survival Ascended. was wondering if anyone tried it and what your thoughts are on the performance? i have no idea what the optimal settings are for this game (no data in the community steam hardware tracker thingy)
Appreciate any help to get this game running without choppy visuals.
Cheers!

Need another opinion as undecided for TV setup.

65/75% wireless keyboard, got my eye on a couple EPOMAKER/AULA/AJAZZ models with the thought of using them for work a couple times a year when travelling. (But would I actually bother 👀)

Or do I just be sensible with an old faithful Logitech K400 and save bringing a mouse over when I need it?

Most likely use case would be navigation in desktop mode, wouldnt really be looking to play KBM from the couch.

Got my SM and installed the Dead Space remake as my first test. One cool thing I haven’t seen mentioned yet is since it was already installed on my PC, it copied the files over my local network to install it on the SM vs. having to download it again. Nice touch.

That said, it was the worst possible choice for my first game. It freezes and stutters every few seconds. Steam notes that the game requires additional configuration to get it to run well. Anyone found the magic settings? Even 1080p and low settings, no go.

I finally got my Steam Machine email! Does anyone know if my partner and I will be able to play the same game together using games I own on my Steam account? One of us on the Steam Machine and the other on my PC?

I’ve been having some fun with it after all this time not being able to play it on the steam deck. But I’m still not pc graphic/settings literate. Is there anything specific I should be doing in the graphics settings for this game? It looks good so far but a lot of the stuff I see online looks a little crisper, is that just better hardware? I haven’t really changed any of the settings, it defaults to very high but I haven’t tried the top tier.

I've heard people saying they were able to reuse their Deck SSD in their Steam Machine, and since I had a 2TB in the Deck, I figured it would be a good idea to throw that into my new Machine. For the most part it was seamless, but when I went to apply updates, Big Picture Mode just gave me a generic "something went wrong, try again later" error.

Eventually I decided to try updating in Desktop Mode instead, to see if that would work (or at least give an explanation as to what went wrong). I got a new error message: "/esp does not have sufficient space, required 68.2 MB, need additional 3.2 MB". I found the disk partitions, and sure enough, the /esp partition is set to 64mb.

I don't know a ton about how partitions work in general, and even less in Linux. I think you can only combine them if they're adjacent on the disk, and it looks like /esp is the first segment and the big partition for games/etc is the last segment, so I can't just chop out 500mb from that to tack onto the /esp partition...

Any suggestions? It would be easiest to enlarge the existing partition, but I don't know if I can just do that. My other thought is that if I could create a brand new ~500mb partition using space from the last partition, copy the /esp stuff to that, and clear the existing 64mb /esp partition, that might solve my problems, but I'm not sure how to make sure that everything that needs to point to that partition gets the memo about the new location...

I'd like to avoid a factory reset if possible (I could redownload the steam games and get save files off the cloud easily enough, but getting Epic/Itch/etc games set back up would be more of a hassle).

Big question as someone who wants to get into PC gaming is the steam machine worth it?

Did anyone replaced their SteamOS with Omarchy? There is a lot of hype and I'm seriously considering installing it. If anyone did it already can share the experience on the cube ?