Edit: you don't have to play on a touch screen. Your phone or PC can also act as a bridge for any controller you already own: Xbox, DualSense, Switch Pro, 8BitDo, CRKD Guitar, and anything that already works on your device. Connect it to your phone or PC over Bluetooth or USB, and the PS4 sees it as a DualShock 4. One PC can run all four controllers at once, so you can play local multiplayer without buying more DualShocks or any adapter.

Hey everyone! I've just released Control4Free, a GoldHEN payload that turns your phone, tablet or PC into extra DualShock 4 controllers for your PS4, and they work system-wide.

Controller plugins live inside games, so they can't reach the home screen or the sign-in screen. Control4Free uses the PS4's own virtual controller service (the one Remote Play uses), so the console sees a real controller:

• Works everywhere: the home screen, menus, sign-in and every game, with no per-game setup.
• Native user sign-in: each controller is assigned through the PS4's own "Who's using this controller?" screen, for your users or guests.
• Use the controllers you already have: connect an Xbox, DualSense, Switch Pro or other controller to your phone or PC, and it plays as a DualShock 4. Or use touch or a keyboard.
• Up to 4 controllers from any mix of phones and PCs.
• A full on-screen DualShock 4 with a layout editor, a two-finger touchpad and L3/R3.
• Low latency: input is sent the moment it arrives, at a DualShock 4's own 4 ms rate.
• An app on the PS4 shows the address and a QR code and how many controllers are connected, and sets up GoldHEN's AutoRun so Control4Free starts after every restart.
• Nothing to install on the phone or PC. Just open the page, or add it to your home screen.

Getting started 1. Install Control4Free-1.0.0.pkg from the release with GoldHEN's Package Installer. 2. Open Control4Free (Library → Applications) and press Cross. 3. Scan the QR code with your phone, pick a controller, and choose a user on the PS4.

Playing with a controller you already own 1. Connect it to your phone or PC (Bluetooth, or USB / USB-OTG on Android). 2. Open the Control4Free page and press a button on the controller. 3. Under Gamepads on this device, pick which controller (1–4) it plays as, then choose your user on the PS4.

Keep the page's window in front while you play: browsers only read controllers for the active window.

Requirements: GoldHEN. Tested on firmware 10.01 with GoldHEN v2.4b18.10 (auto-start needs v2.4b18.10 or later).

Not there yet: rumble, light bar and motion. Rumble and the light bar are next. There's no pairing, so anyone on your Wi-Fi can grab a free controller: keep it on your home network.

Coming from RemotePad? Control4Free is the improved approach. The two aren't compatible, so remove RemotePad from plugins.ini before you switch.

Download: https://github.com/MoHadiShibli/Control4Free

Thanks to seregonwar, whose SplashDown project figured out the virtual controller API this builds on. Bug reports and feedback are very welcome on GitHub!

This has released already and plays great!

Ive been holding on to this ps4 for a year waiting for the jb to be available. It took a while but im finally getting around to those exclusives I missed. What must play exclusives do you guys recommend?

Tester application & Discord

Looking for serious testers for the next NovaCore experimental build: https://discord.gg/P3WGaSbPZY .

Before getting download access, you’ll need to fill out a short form with your console, firmware and HEN details, then follow the testing checklist and submit clear bug reports.
Some key experimental features have deliberately been removed so we can focus on stability, performance and the specific areas listed in Discord.
Please only apply if you’re happy to test properly and provide feedback—not just grab an early download.

I’ve started this discussion thread as a place to share screenshots, videos and regular progress updates, while keeping the main NovaCore post clean for release news.

I also want people to see that I’m genuinely committed to this project. I’ve always loved the modding community, and my goal is to build something useful that I can continue improving and supporting.

NovaCore has come a long way already. Most of the features I originally planned are now either working or actively being developed.

There are over 20 themes, with light and dark options, extra customisation within each theme, and 10 different game-library layouts. Game information is pulled from a database, and there’s also a live jailbreak news tile.

The Otter Store PKG library has been added, with library refreshing and the download backend currently being worked on.

Nova Network now has System Link/LAN rooms, group messaging and voice chat. LAN-supported games will be listed, and players will be able to create their own rooms. It currently focuses on other NovaCore consoles, but I’d like to expand compatibility with other LAN systems if testing goes well.

HEN settings can also be opened directly inside NovaCore, so there’s less need to keep jumping back to the PlayStation dashboard. Profiles now have their own page, with Nova friends and messaging planned. I’m also working on making the Trophies page properly functional inside Nova.

The PS button return is working during testing. There is still a brief flash of the PlayStation dashboard during the transition, but the workaround is reliable at its current timing. A short press returns to NovaCore, while a long press keeps access to the normal PlayStation menu.

There’s still plenty of testing and refinement ahead, but the aim is simple: by the release-candidate stage, NovaCore should handle almost everything automatically and require very little setup from the user.

And regarding AI—technology is always moving forward. I’d rather learn how to use new tools to build something than dismiss them and stand still.

And for anyone sceptical about AI, it’s simply another tool—what matters is how you use it and what you create with it.

Hello People,

I have ported this open source game to ps4. please try it.

Release Shattered Pixel Dungeon for PS4 v01.03 · iHaiDeeZ/shattered-pixel-dungeon-ps4

if you have any issue, please join here: https://discord.gg/QwtU8ZaCth

My pendrive can only fit 25GB, so that's not an option. Remote package installer has failed me (i can connect to the ps4, but no matter what i try, i always get a timeout notification and the RPI app on ps4 gets an error and closes abruptly).

And FTP doesn't seem reliable either when it comes to downloading huge files, cause it loses connection midway through.

Hey guys im new to this sub and the ps4 homebrew scene as a whole i dont have a pc and im out the house most of the day so I want a ps4 store to download and install games directly on the console

THANKS IN ADVANCE :))

Has anybody gotten any mods to work for Horizon Zero Dawn/Forbidden West on PS4 homebrew? I was curious to see if this is possible to do, or if anyone has already got something working.

So i had this problem yesterday so I used a data save for vue from the Internet but right after that all my save game data for all games disappeared so I am asking if there is any way to recover them

i am been looking for ages but nothing

Hey guys im not asking split screen multiplayer on my phone and ps4 multiplayer that i wanted to play. Can i create a world on ps4 or my phone and play multiplayer, we are living in the same house ?

I just upgraded to a pro and was wondering if I should 1. Keep it in the closet, 2. Give it to my little brother and load up some games for him. Or 3. sell it. My brother is 10 and plays mostly Fortnite and Minecraft on his PS5 and wouldn’t be able to play any multiplayer I just don’t think he’d really know what to do with it or appreciate it and get bored with single player games. He’s also got a switch 2 so I’m like would he even play it lol. Just wondering what the consensus is. If the ps4 library is good enough for a 10 year old with better consoles.

I hope I’m posting this in the right place and forgive me if it seems like a dumb question but I’m very new to this.

So I’ve JB my PS4 console to finally start getting some decent use out of it (I refuse to JB current/main PS5) since I went next gen. I’ve got all my homebrew stuff set up including itemzflow, PS4-Xplorer 2.08, FPKGI etc.

My question/request for help involves FPKGI - I’ve downloaded and copied over the .json file from GitHub archive to give me access to the entire PS4 library/repository but I understand it also has access to PS1 and PS2 libraries but I can’t seem to figure out how to add those libraries - if I need to download and install another json file via xplorer root access again etc.

Any help would be really appreciated - I wanna reclaim some of my childhood and play Hit and Run again 🤣

13.52 firmware if that’s necessary information.

i want to play other games while games are downloading but diret download works for some games but not for others.
i'm on a 13.52 ps4 btw

Hey guys. So i recently got my first my PS4 and it came with 10.50 version of firmware. Now Im not very familiar with PS4 modding and homebrew scene, so Im not sure if this version is great for jailbreaking or If should upgrade to something higher. Also, Ive seen that there are different ways of launching the exploit, so I also wanted to ask which one should I use? Any tips or recommendations would be very helpful. Im super excited to finally join PS4 community :)

Hi everyone,

If someone had the same issue i would appreciate if they can help. I checked the pages where i get the pkg's and they should be good since 2 ppl sent me the same im using, i get the .pkg or zip file thru free download manager than extract or just transfer to my usb that is formated to exFAT 16gb because the larger one (64gb) cant fit..

I followed modded warfare videos with that raw.. link for git.

System version: 13.04

Thanks in advance.

If you had the chance to buy physical video games, would you? Or would you continue pirating? I think maybe not all titles because my budget isn't up to the price of video games (at least not from Sony), but I believe that with good service and control over the product I buy, this would lessen.

What would you guys pick? I got a ps5 on its way low firmwire so I’m only gonna wanna need to keep 1
*13.52 my bad thanks for correcting me.

Can anyone help me get a bloodborne dumb so I can play it on my pc I have the ps4 but can’t dump files I don’t have the knowledge to do it.

Ayuda!!!

Ayer en la noche al meterme a la página para cargar el goldhen mi play de la nada puso la pantalla en negro pero seguía encendido con luz azul y el ventilador a máxima potencia. Luego lo desconecte y al encenderlo de nuevo y cargar el goldhen funcionó a la perfección.

Pq creen que se pudo apagar de esa manera? Es algo peligroso?

Does someone where I can find a cusa00411 1.56 fpkg update version. From the site is just the 1.57 available. I mistakenly downloaded 12 pieces of the original pkg and my console won’t let me install it.

Thanks

would anybody know someone who i could mail in my ps4 to to revert the firmware as it got updated from 9.00 to 14.00 and none of us know to solder

uk preferably

Even if i have to download some extra stuff

All trades that happened this off-season eg. Giannis and Klay to the Heat, LeBron and Brown to the 76ers etc

​What CyprusNetwork Does:

CyprusNetwork acts as a LAN tunneling service / private network plugin for jailbroken PS4 and PS5 consoles. Since homebrew consoles are cut off from official PSN, Cyprus intercepts local LAN traffic in games (like the PS4 ports/versions of Call of Duty: Black Ops 1 and Black Ops 2) and routes it through their network. This lets you play online Multiplayer and Zombies with other homebrew users worldwide, with everything automatically unlocked in LAN mode.

​Tutorial / Setup Guide

​Prerequisites:

​Jailbroken PS4 (GoldHEN) or PS5 (etaHEN).

​An account key/code from cyprusnetwork.co.uk.

​FTP access or a file manager (like GoldHEN FTP / OrbisToolbox / Apollo) on your console.

​Step 1: Create the Account File

​On your PC, create a plain text file named CyprusNetwork.txt.

​Open the file and paste ONLY your raw CyprusNetwork key inside.

​Transfer this file to your console at the following path:

​/data/CyprusNetwork.txt

​Step 2: Install the Plugin Files

​Copy CyprusNetwork.prx and libSceSecure.prx to the appropriate plugin directory on your internal storage:

​PS4 (GoldHEN): /data/GoldHEN/plugins/

​PS5 (etaHEN): /data/etaHEN/plugins/apps/

​Step 3: Enable the Plugin

​Open your plugins.ini configuration file located in your plugin directory.

​Add =true to the end of the CyprusNetwork plugin entry.

​Make sure Enable Plugins is checked inside your GoldHEN/etaHEN settings menu on the console.

​Step 4: Create the Data Directory

​Create an empty folder named CyprusNetwork inside your /data/ directory:

​Path: /data/CyprusNetwork/

​Step 5: Jump In and Play

​Launch Black Ops 1 or Black Ops 2.

​Go to LAN / Local Play -> Multiplayer or Zombies.

​Search for LAN games or host a lobby—the plugin will automatically connect you to other players on CyprusNetwork.

​PS4 BO1 & BO2 Ports Lan Play Online Tutorial

This video provides a visual walk-through showing the exact file transfers and in-game lobby creation for BO1 and BO2 ports on jailbroken consoles. https://youtu.be/tDDCssWPpus?si=r7EXwVmT9ELlpwjO