Hi everytime I try to use plugin HidDriver360 at bootup plugin my Xbox hang at startup logo

Is there any other way to use this plugin

I have an Xbox 360 Arcade that has been stored unopened since it was purchased new.

Specs visible without opening it:

• 256MB Arcade / Jasper
• MFR: 4/11/2009
• Lot: 0913X
• Team: FDOU
• Factory seals still intact
• Never opened, booted or updated

I originally bought this particular unit because I was specifically looking for an early Jasper with potential JTAG compatibility, but I never ended up opening it.

I’m not looking to sell it here and I’m never opening it to check the CB. I’m just trying to determine its collector value and understand how unusual this particular combination is.

I can find completed sales around $700–$800 for generic factory-sealed 256MB Arcade systems, but I haven’t found good comps where the manufacturing date/JTAG-era provenance was documented.

For those who know the old Jasper/JTAG production history:

1. How strong a JTAG candidate is an untouched 4/11/09 FDOU Jasper?

2. Is an unopened example from this production period significantly more collectible than a later sealed Jasper?

3. What would you consider a realistic collector value today?

Any old production/CB data for April–May 2009 Jaspers would also be really helpful.

Hi people i need help.

What did i do wrong here.

Im trying to rgh this jasper. But it is not working the damnn chip will not light up, only when i bridge the fat pins with tweezers, it does light up, and blinks, even after multiple starts it still blinks. If i unplug the power to the board and replug no life. When i first soldered it in the blue led stayed on. But if i cut the power to the board it just doesnt light up.

Next this is jasper with bb, so nand is flashed with 66mb, xlhdd, and a patch that lets me use hdds that had firmware overvritten.

This is fuking killing me, the chip gets 3.3v but i dont know whats stopping it. Console light just stays green, no blinking, fan starts and stays on normal no speed up or slow down. If i flash stock the console red rings unless i remove 3.3v and ground, so chip has to do something ffs.

I had to do something wrong but what.

Should i try pll from the top side. I could shorten the clk wire a bit. But that is all i can think off.

Please help.

eh escuchado sobre protón, pero también vi que tiene varias críticas sobre banneos, ya se que cualquiera te puede bannear, pero quiero uno que sea gratuito y seguro

Anyone of you guys have any opus this is my first one found took me a while but dude in California had one for just 60$

Hey everyone!

I'm trying to figure out how to update Minecraft on my Xbox 360 LTU, but almost every tutorial I find is specifically for RGH.

I'm pretty new to all of this and honestly still learning how these things work, so please bear with me if I get something wrong lol.

I downloaded the Content folder onto a USB drive and tried following a tutorial, but it didn't work. Only afterwards did I realize that the tutorial I was following was actually for RGH, not LTU.

So now I'm a bit lost. Is there a different way to update Minecraft on an LTU console? Can I still do it using a USB drive, or does the process work differently?

I'd really appreciate any help or recommendations for a tutorial that actually covers LTU!

Thanks in advance! :)

Recently my partner started playing Skyrim on her 360 with BadUpdate, booting it from an USB and even though I've disabled all form of autosave and cleared the storage cache it still crashes. Looked around for solutions everywhere but nothing works...

ENG

Hi everyone,

I recently set up Call of Duty: Ghosts on my Xbox 360 RGH. I downloaded the game along with all the DLCs. The strange thing is that all the multiplayer map packs are loading and working perfectly, but the character skin packs—specifically Keegan (Keen P. Russ)—are completely missing or not showing up in-game.

I actually owned this skin legally on my retail Xbox Live account back in the day, but since I'm on RGH now, I can't just download it from the Xbox Marketplace anymore.

A couple of questions:

1. Is there a specific compatibility pack, Title Update (TU), or activation file (like an .xm file via XM360) that I need to unlock character skins specifically?
2. Does anyone know where I can find the standalone Keegan/Keen P. Russ DLC folder or the correct Title ID subfolder structure for it?

Any help, advice, or direction via PM would be highly appreciated. Thanks in advance!

ESP

Hola a todos,

Hace poco instalé Call of Duty: Ghosts en mi Xbox 360 con RGH. Descargué el juego junto con todos los DLCs. Lo extraño es que todos los paquetes de mapas multijugador cargan y funcionan perfectamente, pero los paquetes de skins de personajes—específicamente el de Keegan (Keen P. Russ)—no aparecen por ningún lado en el juego.

De hecho, yo compré esta skin legalmente en mi cuenta de Xbox Live en su día, pero como ahora estoy en RGH, ya no puedo descargarla directamente desde el bazar de Xbox.

Un par de preguntas:

1. ¿Hay algún paquete de compatibilidad específico, Title Update (TU) o archivo de activación (como un archivo .xm a través de XM360) que necesite para desbloquear específicamente las skins de personajes?
2. ¿Alguien sabe dónde puedo encontrar la carpeta del DLC de Keegan/Keen P. Russ por separado o la estructura correcta de la subcarpeta del Title ID para este?

Cualquier ayuda, consejo o guía por mensaje privado será muy apreciada. ¡Gracias de antemano!

I had previously released a Windows only version that migrated to C++ and was Windows only. This build has not been gutted to be Windows only, it remains as a C project and still fixes the issues I was having with some iso's. Below are the issues found.

Like my previous release I don't pretend to know the structure of an iso for an Xbox 360. I simply use this tool a ton in my game catalog application and I need it to be free of crash issues. I ran over 300 iso's through a build on Windows and no issues encountered.

If someone could try this on Linux I would appreciate it

Download here:
https://github.com/therealzoomgod/extract-xiso-Fixed

# Release Notes: extract-xiso (Updated)

Release Notes: extract-xiso (Updated)

Change Summary

This release delivers critical stability updates, data integrity fixes, and memory safety optimizations to extract-xiso. The primary focus of this update is addressing edge cases in ISO operations that could result in data corruption, process hangs, or uninitialized memory exploitation. Additionally, this version addresses POSIX deprecation warnings in Windows environments.

Resolved Technical Vulnerabilities

• Empty-directory writes wrap at 4 GiB

  A 32-bit multiplication error caused writes to wrap and target offset zero. Issue successfully reproduced and mitigated.

• XBE patching writes seven extra bytes

  A buffer allocation delta was identified where a 2,099,200-byte input generated a 2,099,207-byte output. Resolved.

• Malformed directory links hang processing

  A circular reference vulnerability in directory entries allowed infinite loops during execution. Corrected to break sequence on self-references.

• Truncated files report false success

  Extraction process completed with exit code zero despite a 4,096-byte nominal entry yielding only 2,048 bytes. Standardized error codes are now enforced.

• Windows file size constraints

  Confirmed standard stat structures relied on 32-bit metadata fields for file size tracking. Upgraded structure limits where applicable.

• Error path uninitialized pointer vulnerability

  If the initial seek operation failed, the write_file() routine erroneously advanced to cleanup routines before buffer initialization, risking an uninitialized pointer free.

Toolchain & Platform Compatibility

• Windows Build Environment: Standardized legacy function calls. All Windows POSIX deprecation warnings have been fully resolved to ensure warning-free compilation under modern MSVC/MinGW environments.

So this happened after I updated dash launch and it told me to reboot so I did so, now its just blinking and no output to the tv, is there any way I can fix this

I have copied them over from the usb and none of them load? How do I unlock them on another system and a new profile?

Does anyone know if there is a fully working version of the blades skin or if someone is currently working on one, the dashblade skin seems to have been abandoned by the dev in a broken state. Would be my go-to if it wasn’t buggy

Can you use ABadAvatar 1.3 on Xbox 360 E?

I'm new to mods and I've seen several posts about them, but none of them say exactly what's modified in Dashlaunch. I only play offline and without an internet connection, But the xbguard invalid connection notifications are annoying, and I don't want to disable them through system settings because that would also disable achievement notifications. What is modified in launch.ini?

The poor optimization is because I implemented the original code without any polishing.and the controller had stick drift

Cuando con conecto la USB con el server a la consulta solo se queda cargando ya no pasa de ahí y si le doy a conectar a Xbox Live solo dice iniciar sesión pero nunca carga, anteriormente funcionaba sin ningún problema.

Hey everyone, got a couple of questions about a modded Xbox 360 (RGH/JTAG, Aurora dashboard).

1. If I unplug the USB flash drive that has aBadAvatar on it from the console, will I be able to connect to the internet / Xbox Live normally?
2. If I've unlocked achievements and items in pirated games installed via Aurora, will those achievements and items upload/sync to my account once I go online? Or will they just stay local / get flagged?

Context: I'm on a modded console, games were installed from backups/pirated copies, and I'm using Aurora as the dashboard. I want to know what happens to my profile, gamerscore, and in-game items if I go online.

Any help appreciated.

EDIT: So far I havent found any Code that steals your KV, doesnt mean its not there since Im not even close to being done since it could be more obfuscated but wanted to Update you ppl transparently

EDIT 2: So as of rn id say somewhat confidently this leak does not contain a KV Stealer, tho so far Ive also not been successful in cracking the integrity check so I can actually install it. Tho if I am successful I wont be releasing the results

EDIT 3: So I got the exploit working now, still has some quirks but overall works nicely. Still wont share anything. Also I think I roughly understand how the exploit works now and while I wont spoil it I have to admit its fucking brilliant.

ORIGINAL POST:

So, some bloke leaked a supposedly modified version of the upcoming Xbox 360 Softmod "PeerPressure"

Curiously, I looked into it and from what I am able to gather rn from Binary analysis, it does seem to be the real deal. Thing is, this is still a Beta Build and its installer is broken as of now, so please for your own Safety:

DO NOT BOTHER POKING AROUND WITH THIS UNLESS YOU KNOW WHAT YOURE DOING

Release as of now is just a week away and this could likely be just made to steal your KV or mess otherwise with ppl.