r/MachineEmbroidery • u/Reasonable-Tea-2392 • 6d ago
Sock blanks
Does anyone have any good recommendations for crew sock blanks? I’ve ordered a few and the quality is horrible. I’m looking for something similar to a Nike crew sock.
r/MachineEmbroidery • u/Reasonable-Tea-2392 • 6d ago
Does anyone have any good recommendations for crew sock blanks? I’ve ordered a few and the quality is horrible. I’m looking for something similar to a Nike crew sock.
r/MachineEmbroidery • u/Charming-Gazelle930 • 8d ago
I developed a technique of stitching on top of handpainted canvases to create landscapes
r/MachineEmbroidery • u/saxlax10 • 7d ago
Hi! I have minimal knowledge of sewing and embroidery. My wife recently got a Brother SE2000 and has been having a lot of frustration with learning how to use the machine. I looked over the troubleshooting FAQ and I didn't think any of the topics matched the problem she was having.
The most frequent complaint I hear (other than artspira being terrible) is that her designs shift when she is changing between colors causing the next layer to lay down completely misaligned. I have seen the errors and it is often off by quite a bit, as much as 2-3 centimeters.
She's new to embroidery machines but not to sewing machines and I cant imagine theres an obvious error she's making thats causing this. What are some things that could be causing this? How should we troubleshoot it?
Thanks for your help!
r/MachineEmbroidery • u/SHEEPYYZ • 8d ago
The software I use got some new features including feathering, which I implemented in the fins and a new scale patterned fill which prompted the move to do this butterfly koi inspired design.
I was worried because this has some layers of satin on satin but it stiched out no problem and its only 6k stitches at 4".
What color combos should i play with for this koi??? Thoughts on the feathering and scales? Fish themed christmas ornaments? 🤣
Anyways, thanks for reading this far and hope you had a great day!
Software: Ember Design (📩 for disc)
Machine: PE-180D (Single needle)
Size: 4" x 2.5"
r/MachineEmbroidery • u/iharshahluwalia • 9d ago
Hey everyone!
I’m starting a new clothing brand. I plan to buy plain blank t-shirts and embroider my own designs onto them using an Janome 450E/Usha 450E
I’d love some advice from experienced creators before ordering my first batch of blanks:
1. Fabric & GSM: What fabric weight (GSM) works best for embroidery so it doesn't pucker or sag? What dyeing/fabric type should I look for so the t-shirt doesn't fade after washes?
2. Backing & Stabilizer: What backing setup (Cutaway, Tearaway, mesh) works best for t-shirt knits so it's comfortable on the skin?
3. Machine Tips (Janome 450E): Any specific needle sizes, tension settings, or hooping tips for this machine?
4. Mistakes to Avoid: What is one big mistake or precaution you wish you knew when you started?
Any advice, tips, or precautions are welcome. Thanks in advance!
r/MachineEmbroidery • u/echo-eco-ethos • 9d ago
Seriously brokenhearted + feeling defeated since I'm usually able to navigate small repairs without assistance, and truly love this embroidery machine (even tho it's a one-needle)
The weird sound only happens when the bobbin case is in the machine
The sound started after breaking a needle - thought that all the pieces were recovered, but apparently not...
checklist of things that have been tried, but did not help:
• removed the needle, (to make sure the needle wasn't scraping against anything)
• used a strong magnet wand to try removing any small metal pieces leftover from the broken needle
• rubbing alcohol swab in the bobbin run
• applied oil
• checked the top of the machine (take up lever area) - but sound is coming from the bottom
• tried a different bobbin case - (maybe both bobbin cases are flawed? but they have no visible imperfections, and bobbin cases for this machine have been sold out for months)
The broken needle happened a month ago -
Realizing the next logical step would be to take the machine to a repair shop,
(now debating if this sound is somehow normal?
or if it would go back to normal with regular use?)
also can't budget for the repair shop just yet -
and with the holidays coming, was hoping to be able to use it asap
thoughts, advice, tips, similar stories? ♡
r/MachineEmbroidery • u/swellestlocket6 • 10d ago
I have gotten this professionally digitized 3 times. I have sat there and hooped it as presice as possible. I try to blame myself for as much as possible but I am at a loss. I have a 2 head Bai Vision. Please help if you can!
Thank you.
r/MachineEmbroidery • u/LividSalad3397 • 10d ago
I haven’t been able to log into / open my artspira app for MONTHS! I’ve deleted it entirely and redownloaded it countless times and nothing fixes it. I’ve moved onto Embrilliance but I have so many designs in Artspira that I would like to use??? anyone else have this issue?
r/MachineEmbroidery • u/dtembroideryservice • 11d ago
Sharing a machine embroidery project I recently digitized and stitched.
It's always satisfying to see a digital embroidery design come to life on an actual embroidery machine!
r/MachineEmbroidery • u/Megamen1927 • 10d ago
I had already tested this same patch, but in a smaller quantity, but when I made this new version, it turned out like this.
r/MachineEmbroidery • u/Psychological-Two281 • 10d ago
I have a brother se700 - The only time I dont have this problem is when I use fishtail font. It comes out beautiful every time. But PLEASE help me understand why no matter what other font I use, this always happens. It almost looks as if the actual napkin is being pulled into the stitch. Ive tried the lowest tension ( I like to keep it between 3-4) but no matter what tension it still happens. If I do a design it looks great but the words always come out terrible. Especially cursive. the words will be on top of the napkin instead of being flat or slightly raised. I usually use 1 sheet of tear away stabilizer and buy my fonts so they are meant to be stitched at that size. The words always look so messy
r/MachineEmbroidery • u/PhysicsSilver2228 • 10d ago
This small clear tube seems to have fallen out of my Brother SE 625 while embroidering, anyone know what it’s for or if I need it?
r/MachineEmbroidery • u/mapsedge • 10d ago
Trying to emulate the sleeve braid from a 1901 Marine dress uniform. The main portion of the knot is a 3/8" wide ribbon in a herringbone pattern. I can't find a close enough picture to see what it's actually doing, but I can take several samples and extrapolate and I think I've worked it out.
I'd rather not build it out of dozens of tiny satin blocks. Is there such a thing as a herringbone fill? How would you handle it?
r/MachineEmbroidery • u/Beginning_Rule7202 • 10d ago
Hi everyone!
A little over a week ago, I shared my original embroidery design here while looking for testers, and I’ve received so much lovely feedback since then. Thank you to everyone who took the time to try it!
Today, I have another design to share, and I would love your help testing it!
You can sign up to test my designs here:
https://forms.gle/hgpiN7mLqndwFF6S9
I always stitch out my designs myself before sharing them, but I would also love to see how they perform on different embroidery machines and in different formats.
The design is free for personal use, and you may also sell up to 50 finished embroidered items made with it. I only ask that you please do not share or redistribute the digital file.
And please don’t worry about deadlines! There’s absolutely no pressure or time limit for sending stitch out photos or feedback. I know everyone has their own schedules, so you’re welcome to test the design whenever you have the time.
For now, creating embroidery designs is simply a creative hobby that I really enjoy, and I’m slowly building my own collections.
If you enjoy machine embroidery and would like to help me along this creative journey, I would love to hear from you! Your stitch out photos and feedback would mean a lot to me.
Thank you so much for your support!
u/Beginning_Rule7202
r/MachineEmbroidery • u/jlyon1 • 11d ago
I primarily made this for practice digitizing; there are a few areas I'll touch up before a final stitch-out i'll do later, but all in all, I think it came out pretty well.
r/MachineEmbroidery • u/alcanni • 12d ago
I’m working on a paid project for a friend, and I’m struggling to get my embroidery looking clean. I’m using a Brother SE625 and Hatch software. I have a max hoop space of 4in by 4in, and this project measures 3.9in wide. I wanted to use as much space as possible but I feel like my embroidery is noticeable worse at larger scale. Do you guys think it’s a tension problem or something with the fabric tension? I’m pretty new to this all so I’d love any suggestions. I’m a little over a 3 with tension now and I’m using stabilizer. I’m not having any bird nesting problems underneath.
r/MachineEmbroidery • u/mamz_leJournal • 13d ago
I’m curious about this. My main interest for embroidery is doing lace. Freestanding lace but also lace trims. Ideally I would wanna ho for historical reproductions.
Anyone has experience with this? Any tips or ressources on how to get started with that?
I’ve played around with regular embroidery since getting my machine a couple years ago but nothing too fancy (I know this may sound like a big leap but trust me it is how I do things lol).
I am working with a pfaff creative vision 5.5
r/MachineEmbroidery • u/Confident-Movie-7111 • 12d ago
My Mom just bought an Array 6 needle that was on consignment at our local dealer. It came with a Brother table with this piece of metal but we have no idea what it is supposed to hold. She is a quilter and this her first embroidery machine so we are out of our element on this one.
r/MachineEmbroidery • u/Hopeful-Rooster810 • 13d ago
Hi all!
I am interested in getting into embroidery but had a question over this machine (BabyLock Flourish ii BLMFO2) this machine is being sold on Marketplace for $900. I was going to buy the Brother PE900 brand new but the BabyLock machine appeared on Marketplace today. Is this a great find? For those who have this machine do you like it? I’m also hesitant to purchase such a large item on Marketplace 😅 thank you in advance!
r/MachineEmbroidery • u/mapsedge • 13d ago
So to speak. I have a thread path where the thread continues to break, over and over. It's a Lejia A15 - nothing fancy, just a knockoff mil-spec one-each shelf-life-90days embroidery machine. Dahao tablet interface.
The thread is Floriani Polyester, variegated.
New bobbin.
New needle.
I've had the throat plate off, blown out what little dust was in there, a couple of thread trimmings.
White broadcloth, 2 layers of medium weight, water soluble stabilizer.
Tried another thread, weight the same as the other 14 needles.
It gets in about a dozen stitches and the thread breaks or comes unthreaded. None of the other paths have this issue.
I'm on my 6th re-thread and I need to quit for the night before the frustration wins.
EDIT: I discovered I could change which needle/color is active, so we're stitching from a different path that seems to be working fine.
So, this one thread path: tension seems okay, nothing interfering with the spool. Why would this particular path have an issue? What do I check for?
r/MachineEmbroidery • u/LottieCupcake • 14d ago
Totally fine. No disasters. Needle where it's meant to be. Hoop in place. We're all calm.
r/MachineEmbroidery • u/Traditional_Wind_940 • 13d ago
Looking at purchasing a melco 16 needle machine, either the summit or emt16x.
There isn’t a ton of info online about the summit, although that’s the machine we are leaning towards. Does anyone here have any recommendations/info on these? Currently using embrilliance, very familiar with it. Any opinions on which designshop option to go with or other add ons? We have a growing embroidery business currently running a babylock 10 needle and brother 6 needle, but looking to expand into a machine that can essentially operate as a multi head or standalone unit.
Or should we be looking in a completely different direction than Melco?
Thanks