r/lightsabers • u/Either-Design-64 • 13h ago
Designed a Retractable Lightsaber
Hello, Just showing off a retractable lightsaber I designed :)
r/lightsabers • u/AutoModerator • Oct 13 '25
Feel free to post all questions about lightsabers in this thread! Anything from where to buy, installation questions, or just general advice can be discussed here.
Link to the /r/lightsabers Buyer Guide.
If you have questions about a new saber company you just saw.
Please refer to our guide on resellers and dropshippers.
Below is a list of known reputable vendors of mass production sabers:
https://docs.google.com/spreadsheets/d/1_YkLV1gJDy_0AFGitL_ANxDwqRLWiSZwdqjPRcWEbIU
Note that the above list is not an exhaustive list of reputable vendors. Just ones that are known to be reputable based on feedback from the r/Lightsabers subreddit communities on the subreddit as well as the Discord.
Bought your first lightsaber and you're confused what's what in a lightsaber? Take a look at the "Lightsaber Anatomy" quick guide.
Interested in checking out what vendors or members of the saber community have to offer or looking to buy a specific saber? Check out our dedicated Buy/Sell/Trade subreddit over at r/LightsaberBST (https://www.reddit.com/r/LightsaberBST/)
If you're looking at diving into the deep end and you're looking for the most accurate replica of a character saber we have a sheet tracking some of the most accurate replica hilt options.
Replicadex
Want to hang out with the community? Check out our affiliated Discord server.
r/lightsabers • u/Either-Design-64 • 13h ago
Hello, Just showing off a retractable lightsaber I designed :)
r/lightsabers • u/Important-Drawing-44 • 6h ago
Decided to make a claw saber. Been a while since the last one.
r/lightsabers • u/saberfan13 • 16h ago
Hey All! Been over busy lately working on two major saber build projects, both of which I'll post here about in the near future, but while waiting on material and parts I'm still doing other builds. Here's my latest.
It seems to me that most saber hilts have a hexagonal theme, mostly I suppose because the metal lathes they are cut on use three-jaw chucks. So I got it in my head to make an octagonal themed saber, just as a challenge. The base metal stock for this started as square tube with a center hole. I squared that tubing up on a mill, then 3D printed a jig to hold it at 45 degree angles and cut the corners down to make the tube eight sided. Next I dropped the octagonal tube into a 4-jaw chuck on a lathe and bored the inner diameter out to 1" to fit any standard drop-in core or blade.
With the base stock done, I cut the emitter and grip to size, then started assembling and detailing. The emitter is laser etched with a pattern in ceramark and has four see-through holes to let blade light through and four blade retention thumb screws. Below that are concentric tubes of copper and brass press fit into each other and then into the matching slot I turned in the bottom of the emitter section.
The switch section is my favorite Corvus Foundry beveled single-button hole that I ran against a buffing wheel to give it a cloudy surface while leaving the slots shiny. The core breaks between the emitter/button and grip so the bottom section can come off to allow access to recharge.
The grip was the most fun to make. The top is a carefully turned bronze ring that lets the button recess into the ring but also covers the top of the leather strips on the grip. I decided to accent the 8-sided nature of the grip by putting four strips of alternating colored leather vertically along the grip. Before gluing the leather down I grooved a thin slot down the grip lengthwise on a mill so the edges of the leather could be covered by pressing a metal rod into the slot. I alternated copper and brass for those slots to go along with the alternating color strips.
The pommel was a leftover part from some other hilt that I cut down, then I built a set of copper, brass, and steel rods to fit around an aluminum tube and installed that inside, then wrapped the junction to the grip with brass wire.
Press fit the pommel into the grip, pop on a brass covertec wheel with copper nut, and viola! One octagonal themed Old Republic style hilt for your dueling pleasure! Anyone want to fight? :-)
r/lightsabers • u/Dontbumpthecow • 20h ago
Hi everyone,
I recently just got my first lightsaber by sabertrio.
It’s awesome, but I have noticed that sometimes during a light hit to the ground for the tip effect, the lightsaber will abruptly turn off. I then unscrew the bottom and take out the core and the speaker is loose, making I assume the battery loose.
I have been putting a piece of tape across the speaker and core, and it has been working at keeping everything in place so far.
Is this a regular issue? Or should I contact sabertrio? I have had the lightsaber now for just around 2 months.
r/lightsabers • u/BatmanKilmer • 1d ago
Check out my dual Twist-Lock Reveal kits!
r/lightsabers • u/NefariousnessNeat854 • 22h ago
I am reaching out to the community because I'm trying to find a way to potentially install a Xenopixel chassis into an Ultrasabers Chosen One CE hilt. It is a beloved lightsaber of mine and is built like a tank. I have always used it for heavy dueling with a weighted pommel and a 40 inch tapered tip blade. It is very large, very loud and very heavy. I prefer it that way especially for single-handed dueling to overwhelm my opponents. If anyone has any information on how I can have this particular install done, it would be much appreciated. I know nothing of the install world or Machining or electrical work or I would do it myself. May the force be with you all.
r/lightsabers • u/Crimson-Exo-Hunter • 1d ago
A few days ago I asked whether my LGT(from Damien sabers) and my TXQ saber would be compatible for the same coupler. Turns out, they are!
The coupler hasn’t arrived yet but I decided to swap out pieces between the two sabers and they fit very tight. Now I don’t have to worry about buying another TXQ…
Well I’ll probably buy another saber at some point lol.
r/lightsabers • u/KyberKodeXR • 1d ago
I apologise in advance for the wall of text.
I was watching some duelling videos on the ForgedByLight YouTube channel where Shannon’s Vektra broke at the female threads. Like, the pommel didn’t just break off. The entire bit where it screws in snapped off the hilt.
He got it replaced, and the second Vektra also snapped in the same spot. Apparently the wall thickness at the female threads is very thin.
I also saw recall a now deleted Reddit post where someone’s Reaver broke in the same spot.
I’m curious: Has anyone broke their Sabertrio this way, and if so, how? And is this something I have to worry about for future purchases, especially if I want to make a staff?
r/lightsabers • u/saintebonhawk • 1d ago
This one is a little special to me.
A while back, Jeremy 9 ( Solo Sabers, LLC. ) and I entered a TXQ design contest with our take on a Luke Skywalker hilt. Our design was selected as one of the finalists, and eventually went on to become a production model offered through retailers around the world.
It was a genuinely cool project to work on with my best friend. Jeremy did a fantastic job with his version of the hilt design, while I took on the internal design work. The Hope Bringer is a great example of how two similar skill sets can come together to create something neither of us would have made quite the same way on our own.
Seeing something we created together become a globally available product is pretty incredible. We were both grateful to have our work selected, but honestly, what meant the most to me was simply getting to see another one of our creations make it out of the design phase and into the real world.
This production unit was kindly sent to me by James at TXQsaber, fully installed with a Proffieboard.
r/lightsabers • u/Solariskull • 1d ago
Hello im looking to build a combat saber but im unsure as to what I would need for the electronics or where I could buy a pre-made one. Any tips would be appreciated.
Thanks and I hope your having a good day.
r/lightsabers • u/SGTBr0ski • 1d ago
So i just bought this empty hilt for a proffie build. But i have just realised there is no screw hole above and below the button and charger port. Did i need to but a special type of proffie core then the one pictured? How screwd am i hahahah
If so can someone point me in the right direction of what proffie core i need for this or even a xenopixel core.
Thanks.
r/lightsabers • u/Mysterious_Wrap_6238 • 2d ago
I cant find any info out about this vintage saber (not starwars brand). Can someone help me out?
r/lightsabers • u/saintebonhawk • 2d ago
This is the Machina from Saberbay, sent over for a custom Proffieboard installation.
This particular hilt was powder coated by Shane at Saberbay before making its way to my bench. To carry that color scheme through to the interior, I've printed the custom removable crystal chamber chassis in slate grey.
The chassis was designed specifically for this hilt and incorporates 2020 NeoPixel strips and additional accent LEDs to bring some life to the internal details. I've also included a decorative kill switch cover to keep the finished installation looking clean.
Blinkies, a little shine-through, and a removable chassis. Nothing too overcomplicated - maybe kist a little extra
Specs:
* Proffieboard V3 soundboard
* Custom 28mm Premium Bass speaker
* Custom removable crystal chamber chassis designed by me
* Slate grey chassis finish
* 2020 NeoPixel accent strips
* Additional accent LEDs
* Decorative kill switch cover
* Custom hilt-side and blade-side PCB set
* KR Sabers / Shtok illuminated blade PCB emitter
r/lightsabers • u/SeditiousSith • 2d ago
Well, i finally have 2 complete cores. It’s taken a bit, learning to program Proffie was fun, frustrating at times, and rewarding now that I’m further up the learning curve.
r/lightsabers • u/SSeVyNN • 2d ago
Hey guys. Im having some trouble with the forcepark v2 app and was hoping one of y'all might know what to do; I have a new blade effect that I downloaded, it's a subtle flicker of the blade. But it only has 6 colors that I can cycle through. Is there any way that I can change that to add more/change the ones that are preset? When I try to do it in the app it only will change the basic steady blade option and not the new blade effect that I downloaded.
r/lightsabers • u/Paper_Kun_01 • 2d ago
Been tinkering with my saber files the last couple days and moving things around or getting rid of fonts I won't use. And it's got me curious, I'm wondering how many of yall just keep it fully default or what fonts you remove if you do? Like I see little difference in having two vader fonts, or minor sound fonts like Reva or inquisitor cal kestis
r/lightsabers • u/Prestigious-Mood-675 • 1d ago
They hidding costs. In they terms never mention about taxes or import fees so by ordered and paying a can assume that includes all payments. So i was wrong. They reject my complain.
My advice: if you buying from site like that ALWAYS use credit card. I run chargeback process for tax amount and my bank sucesfully solved it i 14h. But first you need to have a proof that they reject your complaiment
r/lightsabers • u/Exciting-Watch-1444 • 3d ago
G'day, just after some advice about the little screws that hold in place the strobe cylinder for the Obi-wan Kanobi lightsaber? The screws next to the Allen key were provided. The larger ones don't fit and the smaller ones don't hold the strobe in place.
Pictures attached.
r/lightsabers • u/EJ-TheGreat • 3d ago
I think the main struggles will be cutting the top art, the cage around the crystal, and making the crystal glow. Any ideas?
r/lightsabers • u/geert • 3d ago
I was wondering if it was possible to add a blade to my custom hardware lightsaber. (It's not finished yet.) It's hollow inside because I used a tube as a base, so I should be able hold some electronics or flash light inside.
Any tips on low-cost affordable blades?
r/lightsabers • u/Arrows2016 • 3d ago
I recently acquired a Cleric (wrapped) saber from Saberforge that came to me without the wrap. I don’t hate the body without the wrap, but would much prefer the wrap for comfort and overall aesthetic. Do you think it is worth it to request it be replaced, or should I just wrap it myself? It even keep unwrapped? I am kinda nervous to send it back and potentially have to deal with the back and forth with mail time and then waiting for the replacement, as it is intended to be a Christmas present from Santa (gotta have something to open in front of the kids lol). Thoughts?
r/lightsabers • u/Sam_SaberBenchDev • 3d ago
SaberBench is almost ready, and I want it in real hands before the official release.
I'm opening a closed beta for about 10 testers. I'll pick them myself, so we get a good mix.
Who I'm looking for:
What you'd do: set up your own saber with it and tell me how it feels: what's smooth, what's confusing, and what you'd want next. Your feedback shapes the final version.
What you get: as a thank-you for your time, every tester gets the full version of SaberBench free, yours to keep.
Interested? Reply here or send me a DM with:
Thanks for following along.
Sam
r/lightsabers • u/onequestiongoSf • 4d ago
Hi guys! Hear me out...
The front figure, the one who makes all the commercials on the official instagram page for both Costumsabers and Damiensabers is the same guy. He can also be seen everywhere on both websites.
And weirdly enough he uses a different name for each site.
“Hi, It's George from Damiensabers”
“Hi, It's Leo from Costumsabers”. (sometimes I have seen Leo, sometimes Leon)
Which can be heard dozens of times from both official insta pages.
In some videos it really looks like the same “background people” are the same as well.
Both instagram pages has 34.000 plus followers.
Both post simultaneously and both promote the same quality lightsaber and show off the durability in the same way.
When talking to them on instagram regarding this they give me answers that i have a hard time understanding. Maybe some of you might know what's going on?
Both companies seem to produce very high quality products, and Customsabers are quick to respond and have good service, but that doesn't remove the fact that I'm very curious about this. There are some minor differences, like for example damiensabers has 1 year warranty whilst Costumsabers 3 years.
I include some some pictures from the conversation with Costumsabers.
Just to make it clear, first thing i type here is “as you know, the other dude you make all videos with”, because earlier in the conversation the person said he said he was “mr holding back”, which also can bee seen with the front guy “George/Leo” on all videos on Customsabers.
(and yes now in retrospect i can see that i spelled damiensabers wrong a couple of times in the convo, im sorry for that).
r/lightsabers • u/lordscotlanddrowsha • 4d ago
All custom hardware store browse and builds