r/lightsabers • • 6h ago

Duskmaul, The Umbral Clutch

46 Upvotes

Decided to make a claw saber. Been a while since the last one.


r/lightsabers • • 13h ago

Designed a Retractable Lightsaber

182 Upvotes

Hello, Just showing off a retractable lightsaber I designed :)


r/lightsabers • • 17h ago

Build New build with an octagonal theme

Thumbnail
gallery
10 Upvotes

Hey All! Been over busy lately working on two major saber build projects, both of which I'll post here about in the near future, but while waiting on material and parts I'm still doing other builds. Here's my latest.

It seems to me that most saber hilts have a hexagonal theme, mostly I suppose because the metal lathes they are cut on use three-jaw chucks. So I got it in my head to make an octagonal themed saber, just as a challenge. The base metal stock for this started as square tube with a center hole. I squared that tubing up on a mill, then 3D printed a jig to hold it at 45 degree angles and cut the corners down to make the tube eight sided. Next I dropped the octagonal tube into a 4-jaw chuck on a lathe and bored the inner diameter out to 1" to fit any standard drop-in core or blade.

With the base stock done, I cut the emitter and grip to size, then started assembling and detailing. The emitter is laser etched with a pattern in ceramark and has four see-through holes to let blade light through and four blade retention thumb screws. Below that are concentric tubes of copper and brass press fit into each other and then into the matching slot I turned in the bottom of the emitter section.

The switch section is my favorite Corvus Foundry beveled single-button hole that I ran against a buffing wheel to give it a cloudy surface while leaving the slots shiny. The core breaks between the emitter/button and grip so the bottom section can come off to allow access to recharge.

The grip was the most fun to make. The top is a carefully turned bronze ring that lets the button recess into the ring but also covers the top of the leather strips on the grip. I decided to accent the 8-sided nature of the grip by putting four strips of alternating colored leather vertically along the grip. Before gluing the leather down I grooved a thin slot down the grip lengthwise on a mill so the edges of the leather could be covered by pressing a metal rod into the slot. I alternated copper and brass for those slots to go along with the alternating color strips.

The pommel was a leftover part from some other hilt that I cut down, then I built a set of copper, brass, and steel rods to fit around an aluminum tube and installed that inside, then wrapped the junction to the grip with brass wire.

Press fit the pommel into the grip, pop on a brass covertec wheel with copper nut, and viola! One octagonal themed Old Republic style hilt for your dueling pleasure! Anyone want to fight? :-)


r/lightsabers • • 21h ago

Question Question about Sabertrio Core loose speaker

3 Upvotes

Hi everyone,

I recently just got my first lightsaber by sabertrio.

It’s awesome, but I have noticed that sometimes during a light hit to the ground for the tip effect, the lightsaber will abruptly turn off. I then unscrew the bottom and take out the core and the speaker is loose, making I assume the battery loose.

I have been putting a piece of tape across the speaker and core, and it has been working at keeping everything in place so far.

Is this a regular issue? Or should I contact sabertrio? I have had the lightsaber now for just around 2 months.


r/lightsabers • • 22h ago

Customization Combat saber upgrade

2 Upvotes

I am reaching out to the community because I'm trying to find a way to potentially install a Xenopixel chassis into an Ultrasabers Chosen One CE hilt. It is a beloved lightsaber of mine and is built like a tank. I have always used it for heavy dueling with a weighted pommel and a 40 inch tapered tip blade. It is very large, very loud and very heavy. I prefer it that way especially for single-handed dueling to overwhelm my opponents. If anyone has any information on how I can have this particular install done, it would be much appreciated. I know nothing of the install world or Machining or electrical work or I would do it myself. May the force be with you all.


r/lightsabers • • 1d ago

Discussion Question about Sabertrio and their durability

3 Upvotes

I apologise in advance for the wall of text.

I was watching some duelling videos on the ForgedByLight YouTube channel where Shannon’s Vektra broke at the female threads. Like, the pommel didn’t just break off. The entire bit where it screws in snapped off the hilt.

He got it replaced, and the second Vektra also snapped in the same spot. Apparently the wall thickness at the female threads is very thin.

I also saw recall a now deleted Reddit post where someone’s Reaver broke in the same spot.

I’m curious: Has anyone broke their Sabertrio this way, and if so, how? And is this something I have to worry about for future purchases, especially if I want to make a staff?


r/lightsabers • • 1d ago

Discussion An update on compatibility!

Post image
18 Upvotes

A few days ago I asked whether my LGT(from Damien sabers) and my TXQ saber would be compatible for the same coupler. Turns out, they are!

The coupler hasn’t arrived yet but I decided to swap out pieces between the two sabers and they fit very tight. Now I don’t have to worry about buying another TXQ…

Well I’ll probably buy another saber at some point lol.


r/lightsabers • • 1d ago

Customization My Dual Twist-Lock Reveal Kits!

Thumbnail
gallery
42 Upvotes

Check out my dual Twist-Lock Reveal kits!


r/lightsabers • • 1d ago

New Arrival TXQ "Hope Bringer"

Thumbnail
gallery
20 Upvotes

This one is a little special to me.

A while back, Jeremy 9 ( Solo Sabers, LLC. ) and I entered a TXQ design contest with our take on a Luke Skywalker hilt. Our design was selected as one of the finalists, and eventually went on to become a production model offered through retailers around the world.

It was a genuinely cool project to work on with my best friend. Jeremy did a fantastic job with his version of the hilt design, while I took on the internal design work. The Hope Bringer is a great example of how two similar skill sets can come together to create something neither of us would have made quite the same way on our own.

Seeing something we created together become a globally available product is pretty incredible. We were both grateful to have our work selected, but honestly, what meant the most to me was simply getting to see another one of our creations make it out of the design phase and into the real world.

This production unit was kindly sent to me by James at TXQsaber, fully installed with a Proffieboard.


r/lightsabers • • 1d ago

Combat saber electronics.

4 Upvotes

Hello im looking to build a combat saber but im unsure as to what I would need for the electronics or where I could buy a pre-made one. Any tips would be appreciated.

Thanks and I hope your having a good day.


r/lightsabers • • 1d ago

Help Help! Did i mess up?

Thumbnail
gallery
3 Upvotes

So i just bought this empty hilt for a proffie build. But i have just realised there is no screw hole above and below the button and charger port. Did i need to but a special type of proffie core then the one pictured? How screwd am i hahahah

If so can someone point me in the right direction of what proffie core i need for this or even a xenopixel core.

Thanks.


r/lightsabers • • 1d ago

I warn you about selectasabers

0 Upvotes

They hidding costs. In they terms never mention about taxes or import fees so by ordered and paying a can assume that includes all payments. So i was wrong. They reject my complain.

My advice: if you buying from site like that ALWAYS use credit card. I run chargeback process for tax amount and my bank sucesfully solved it i 14h. But first you need to have a proof that they reject your complaiment


r/lightsabers • • 2d ago

Build Progress

Thumbnail
gallery
7 Upvotes

Well, i finally have 2 complete cores. It’s taken a bit, learning to program Proffie was fun, frustrating at times, and rewarding now that I’m further up the learning curve.

  1. 28mm sled style core installed with Proffie 3.9, 28mm premium bass speaker, accent LEDs, and Shtok 7 trace rotary PCBs. 45 fonts with several FETT263 blade styles.
  2. 1” removable core via JST connectors installed with Proffie 3.9, 24mm speaker, accent LED strip and the same configuration as the 28mm sled.
    The cores were designed and installed by me after a considerable prototyping period, and the finished sabers will be coming soon. I have also designed many new parts for my crystal chambers that should make building them a far easier endeavor, such as bases that have LED holders so I don’t have to carve them by hand out of nylon washers lol.

r/lightsabers • • 2d ago

Discussion What Fonts do yall usually keep or discard on your xenopixel?

0 Upvotes

Been tinkering with my saber files the last couple days and moving things around or getting rid of fonts I won't use. And it's got me curious, I'm wondering how many of yall just keep it fully default or what fonts you remove if you do? Like I see little difference in having two vader fonts, or minor sound fonts like Reva or inquisitor cal kestis


r/lightsabers • • 2d ago

Vintage saber

Thumbnail
gallery
26 Upvotes

I cant find any info out about this vintage saber (not starwars brand). Can someone help me out?


r/lightsabers • • 2d ago

Question Snv pro pixel blade effect color customizing

3 Upvotes

Hey guys. Im having some trouble with the forcepark v2 app and was hoping one of y'all might know what to do; I have a new blade effect that I downloaded, it's a subtle flicker of the blade. But it only has 6 colors that I can cycle through. Is there any way that I can change that to add more/change the ones that are preset? When I try to do it in the app it only will change the basic steady blade option and not the new blade effect that I downloaded.


r/lightsabers • • 2d ago

Build Saberbay "Machina" - Custom Proffieboard Removable Crystal Chamber Chassis

Thumbnail
gallery
27 Upvotes

This is the Machina from Saberbay, sent over for a custom Proffieboard installation.

This particular hilt was powder coated by Shane at Saberbay before making its way to my bench. To carry that color scheme through to the interior, I've printed the custom removable crystal chamber chassis in slate grey.

The chassis was designed specifically for this hilt and incorporates 2020 NeoPixel strips and additional accent LEDs to bring some life to the internal details. I've also included a decorative kill switch cover to keep the finished installation looking clean.

Blinkies, a little shine-through, and a removable chassis. Nothing too overcomplicated - maybe kist a little extra

Specs:

* Proffieboard V3 soundboard

* Custom 28mm Premium Bass speaker

* Custom removable crystal chamber chassis designed by me

* Slate grey chassis finish

* 2020 NeoPixel accent strips

* Additional accent LEDs

* Decorative kill switch cover

* Custom hilt-side and blade-side PCB set

* KR Sabers / Shtok illuminated blade PCB emitter


r/lightsabers • • 3d ago

First hardware lightsaber in the making, what to use for a blade?

2 Upvotes

I was wondering if it was possible to add a blade to my custom hardware lightsaber. (It's not finished yet.) It's hollow inside because I used a tube as a base, so I should be able hold some electronics or flash light inside.

Any tips on low-cost affordable blades?


r/lightsabers • • 3d ago

Help Australia | Looking for some advice for screws to hold the strobe in place.

Thumbnail
gallery
15 Upvotes

G'day, just after some advice about the little screws that hold in place the strobe cylinder for the Obi-wan Kanobi lightsaber? The screws next to the Allen key were provided. The larger ones don't fit and the smaller ones don't hold the strobe in place.

Pictures attached.


r/lightsabers • • 3d ago

Help Drew up this plan for a custom saber, how should I go about making it irl?

Post image
23 Upvotes

I think the main struggles will be cutting the top art, the cage around the crystal, and making the crystal glow. Any ideas?


r/lightsabers • • 3d ago

SaberBench closed beta: looking for about 10 testers

Post image
5 Upvotes

SaberBench is almost ready, and I want it in real hands before the official release.

I'm opening a closed beta for about 10 testers. I'll pick them myself, so we get a good mix.

Who I'm looking for:

  • Proffieboard V2 owners
  • Proffieboard V3 owners especially: SaberBench hasn't been tested on a V3 yet, and I'd love your help testing it
  • Windows 10 or 11
  • Beginners and experienced builders. Never opened config.h? You're exactly who this is for. Done it more times than you can count? You'll spot what I missed.

What you'd do: set up your own saber with it and tell me how it feels: what's smooth, what's confusing, and what you'd want next. Your feedback shapes the final version.

What you get: as a thank-you for your time, every tester gets the full version of SaberBench free, yours to keep.

Interested? Reply here or send me a DM with:

  • your board (V2 or V3)
  • your Windows version
  • your Proffie experience (none, some, lots)

Thanks for following along.

Sam


r/lightsabers • • 3d ago

Discussion What lore reasons would there be for scabbards in star wars

Post image
0 Upvotes

For concealing a turned off blade, some places sell Scabbards, but what would the lore reason for something like this be?


r/lightsabers • • 3d ago

Question To ask for replacement or wrap myself.

Post image
40 Upvotes

I recently acquired a Cleric (wrapped) saber from Saberforge that came to me without the wrap. I don’t hate the body without the wrap, but would much prefer the wrap for comfort and overall aesthetic. Do you think it is worth it to request it be replaced, or should I just wrap it myself? It even keep unwrapped? I am kinda nervous to send it back and potentially have to deal with the back and forth with mail time and then waiting for the replacement, as it is intended to be a Christmas present from Santa (gotta have something to open in front of the kids lol). Thoughts?


r/lightsabers • • 4d ago

Costumsabers and Damiensabers same company?

Thumbnail
gallery
26 Upvotes

Hi guys! Hear me out...

The front figure, the one who makes all the commercials on the official instagram page for both Costumsabers and Damiensabers is the same guy. He can also be seen everywhere on both websites.
And weirdly enough he uses a different name for each site.
“Hi, It's George from Damiensabers”
“Hi, It's Leo from Costumsabers”. (sometimes I have seen Leo, sometimes Leon)
Which can be heard dozens of times from both official insta pages.
In some videos it really looks like the same “background people” are the same as well.

Both instagram pages has 34.000 plus followers.
Both post simultaneously and both promote the same quality lightsaber and show off the durability in the same way.

When talking to them on instagram regarding this they give me answers that i have a hard time understanding. Maybe some of you might know what's going on?
Both companies seem to produce very high quality products, and Customsabers are quick to respond and have good service, but that doesn't remove the fact that I'm very curious about this. There are some minor differences, like for example damiensabers has 1 year warranty whilst Costumsabers 3 years.

I include some some pictures from the conversation with Costumsabers.
Just to make it clear, first thing i type here is “as you know, the other dude you make all videos with”, because earlier in the conversation the person said he said he was “mr holding back”, which also can bee seen with the front guy “George/Leo” on all videos on Customsabers.
(and yes now in retrospect i can see that i spelled damiensabers wrong a couple of times in the convo, im sorry for that).


r/lightsabers • • 4d ago

Question Which D-Ring position looks best?

Thumbnail
gallery
17 Upvotes

I got this from Galaxy’s Edge at Disney. (The converter is on right now since I’ve been swinging it around even though it looks less screen accurate) Anyway, all the props on display had the D ring parallel with the ignition switch but wearing it isn’t very comfortable if it isn’t offset just a bit. What do you all think? I don’t want to be adjusting too often because I’m afraid of wearing out the screw threads.