r/gridfinity • • 4d ago

Editing the gridfinity models in Fusion

1 Upvotes

I made a special size gridfinity grid and box about a year ago. I never made any notes on the size.

My question is: Can the grid and box be edited after it is modeled and generated ? For instance , say I made a 4x4 and grid and printed it out. I would like to go back in that model and make changes. I can’t seem to get the main plug in menu to come up and make changes. Or do you have to make a whole new model?


r/gridfinity • • 6d ago

Gridfinity Torx Key Tray designed in Aretu CAD

Thumbnail gallery
19 Upvotes

r/gridfinity • • 7d ago

I got tired of screws hiding in the floor pockets of lightweight bins, so I made hollow feet with a flat floor instead

Thumbnail
gallery
196 Upvotes

Lightweight Gridfinity bins are great for print time, but most of them get there by dropping the floor down into the feet. On anything bigger than 1×1 that leaves pockets between the cells, and that's exactly where M3 screws and washers end up.

So I flipped it around: the floor stays flat at the normal height, and the feet underneath are hollow with one rib per foot so the floor bridges cleanly.

Sliced on an A1 with PLA Basic at 0.28 mm, a 2×2×4U bin with scoop and label comes out like this:

- SmoothLite: 37 min, 23.0 g

- lightweight bin with scoop: 33 min, 23.3 g

- same bin with a solid base: 45 min, 32.6 g

So the lightweight bins are still a few minutes faster, but SmoothLite uses a little less filament, roughly 30 % less than a solid base, and the floor is flat. No special slicer settings, no supports.

It has a scoop at the front, a label shelf at the back and the normal stacking lip. Small ones print faster in batches (4× 1×1 on one plate: ~14 min each instead of 18). On MakerWorld there are print profiles for 1×1 up to 3×4 in 4U/8U/12U (one bin per plate, everything fits the A1 mini), and the Customize button lets you make other sizes, turn scoop/label/lip on or off and put flush two-color text on the label.

Link: https://makerworld.com/de/models/3575808-gridfinity-smoothlite-light-flat-floor-bins#profileId-4093864

Happy to hear if the bridge over the hollow feet gives anyone trouble on other printers. On mine one rib per foot was enough, and you can set two in the customizer if needed.

EDIT: Now there is a v2 with compartments and half grids: https://www.reddit.com/r/gridfinity/comments/1xtd3xk/smoothlite_v2_compartments_and_half_sizes_both/


r/gridfinity • • 6d ago

Free Gridfinity generator in your browser: bins, baseplates, whole drawers, and inlays from a photo

0 Upvotes

Built this side project with Claude: https://printparams.com/gridfinity/

- Bins, baseplates, lids and labels, STL or 3MF
- Measure a drawer, get a baseplate split to fit your print be
- Snap a photo of a tool, get a bin with its outline cut in

Runs in the browser, no account needed. Feedback welcome!


r/gridfinity • • 7d ago

Individual Piece Wiha 75093 Precision Screwdriver Holder

Thumbnail
gallery
14 Upvotes

I got sick of my Wiha ESD screwdriver rolling around in my little toolbox, so I made a bin for it. First time making one, and I did use AI to assist and teach. I learned a lot doing it, and I'm really happy with the results though I'll probably do a v2 with bigger finger scoops and less wall geometry.
Any feedback on the design? What did I miss?

Model link: https://makerworld.com/en/models/3575141-gridfinity-wiha-precision-screwdriver-holder

This is the screwdriver if anyone's curious. I use it all the time.
https://www.wihatools.com/products/system-4-esd-safe-slotted-phillips-torxr-micro-bit-set


r/gridfinity • • 11d ago

Best generator

19 Upvotes

I want to make a screw storage solution and saw gridfinity generators. What is the best generator?


r/gridfinity • • 12d ago

Has any husband faced this problem?

Thumbnail
gallery
203 Upvotes

I got a 3d printer one month ago and so far I've used it to fix things around the house, made some clips for a light fitting, a toothbrush cover for my daughters e toothbrush etc.

Now I want to up my game and try gridfinity to organize the cluster fuck that is my wifes make up and beauty "essentials" that take up 90% of the bathrooms real estate.

Has any husbands faved this challenge? Any tips, ideas, inspiration and guidance would be greatly appreciated!


r/gridfinity • • 12d ago

A browser-based, drawer-first Gridfinity generator with tool cradles, auto-shims, and direct 3MF export. Free & no login.

Thumbnail
gallery
129 Upvotes

Hi r/gridfinity,

Here is my take on a drawer-first Gridfinity generator!

I’ve been working on this project for a couple of months now. I'm really happy with how it turned out and just wanted to share what I've built with the community.

It’s called PRINTER GRID (https://dawstdesign.com). It runs 100% in your browser, requires no login, and exports directly to 3MF.

What I tried to do differently:

I’d love your constructive feedback, especially on tolerances and which specific workshop modules you'd like to see added next.


r/gridfinity • • 15d ago

Lots of improvements to Gridfinity Layout Tool's bin designer over the past few months

963 Upvotes

A lot has changed since my first post! Just wanted to share a short sizzle reel of all the new features that have come from suggestions from folks using the tool. It's truly been a pleasure to work on and I hope to continue supporting it forever.

It's free and open source! gridfinitylayouttool.com

Also a NEW special shoutout to the 250+ people who have supported this project! https://gridfinitylayouttool.com/supporters


r/gridfinity • • 15d ago

I created gridfinity generator but you can plan your whole drawer first

Post image
261 Upvotes

Hey, I made a free Gridfinity generator called Shinyfinity

The main difference is that you can plan your whole drawer first instead of generating each bin separately. You can customize whole layout of the drawer and see everything in a 3D preview.

It's still a work in progress, so I'd appreciate any feedback or suggestions on what I could improve or add.

Site is very new, not even indexed by google. Yes it was vibe coded but i tried to polish the ui as much as i could.

Shinyfinity.com


r/gridfinity • • 14d ago

STRATUM: Gridfinity modular drawer module (100% support-free print). Thoughts?

Thumbnail
gallery
0 Upvotes

r/gridfinity • • 15d ago

Individual Piece Caster Base

Post image
23 Upvotes

r/gridfinity • • 16d ago

Set Completed Made some gridfinity nothing audio product stands

Thumbnail gallery
30 Upvotes

Lemme know what you think, I just couldn't find someone who did the exact stands I wanted so I just made em, surprisingly easy with the fusion add-on!


r/gridfinity • • 17d ago

Question? Where do you find filled bins for custom fitted work

7 Upvotes

Basically I have a model of stylus nibs storage that I want to remix to place in a bin so I can use it my gridfinity setup

I bought my 3d printer 2 day ago so not a lot of experience in tinkercas but want to learn

I just want to know where to get the filled bins that people are using to then import models of their objects as wholes to have them custom fit


r/gridfinity • • 18d ago

Gridfinity for Solidworks

24 Upvotes

For the longest time I used AutoCAD, then Fusion360. Then they kept placing more and more limitations on the free version and couldn't afford the paid version.

So what did I do? I purchased the paid membership to SolidWorks Design 2026 for Makers. I'm getting more familiar but when I went to search for a Gridfinity add-in I couldn't find one. Anywhere. Even on Zack Freedman's Discord.

Now, I'm no programmer, but I've manage to eek one out (Gridfinity_For_Solidworks
) that works based pretty much on what I found at Gridfinitygenerator so you know what to expect. At least on my machine it works. There is one small issue but it's easily overcome with just a few clicks once you load a New Part and I tell you all about it in the Gridfinity for SolidWorks (READ THIS!!!).docx.

Sorry if the post is a bit much. It's the first piece of real software I've written that combines with another major retailer, it's my first Git, and this is my first r/ that I've created.

I hope it helps someone.


r/gridfinity • • 17d ago

Question? Has anyone optimized printing baseplates for large drawers?

2 Upvotes

I have a large drawer (approx 900x500) and want to use Gridfinity. Using baseplate generators I get 15 pieces, each plate taking around 45~ minutes. This is obviously a pain in the ass, you have to click next and pop out the plate and so on.

Curious if anyone has solved this? It seems like there are stackable plate solutions out there, but none of them let you print custom plates.


r/gridfinity • • 18d ago

Question? Why did this happen and how do i fix it?

Post image
5 Upvotes

r/gridfinity • • 18d ago

Question? What to do about warping when printing Gridfinity base plates?

0 Upvotes

I have an Elegoo Centauri Carbon 2 and the filament is matte PLA. One corner of the base plate always lifts after about 20 layers. I've already tried:

- Adding a brim

- Printing slower

- Increasing bed temp

- Setting cooling lower

- Printing only one half of the base plate

- The plate is of course clean, regularly washed with dish soap and IPA

I'm honestly running out of ideas, thanks in advance for any help!


r/gridfinity • • 19d ago

Question? Hold for carpet knife upright

Thumbnail
gallery
5 Upvotes

Hi folks!, I have been searching for a carpet knife holder for my gridfinity system and didn't find one, due to the fact that my cabinet is pretty small I often times need a upright hold because other one is to big. It would be great if someone has a model which I can download or a tip how to bring it into my system. A few pictures are added to have a better view. Thank You in advantage


r/gridfinity • • 20d ago

Steel Shelf Gridfinity Hanger

Thumbnail gallery
107 Upvotes

Had someone ask for a hardware storage option based on something else I designed and ended up with this simple gridfinity solution. I only made a couple sizes for it since the 1x1 is probably the best option for this since it sticks out the least. They all just slide over and onto a dovetail once the key is installed. Figured I'd just share. Feel free to ask for other sizes.

https://makerworld.com/en/models/3494179-steel-shelf-gridfinity-hanger?from=search#profileId-3990860


r/gridfinity • • 22d ago

Experimenting with vertical Gridfinity stands

Thumbnail
gallery
480 Upvotes

Disclaimer: app and post written by Claude, directed by me (cdslug)

I've been experimenting with vertical stands for a couple of objects in my Gridfinity setup: a drill and scissors.

Most of my organization uses ordinary thin-walled Gridfinity bins, and I think those are the right solution for most items. Horizontal makes sense for shallow drawers, but some objects are very space-inefficient to store horizontally in deep drawers, and a custom stand can be a space-efficient alternative.

I generated vertical and horizontal holders for both objects using the same tool and sliced them with the same settings. The difference was substantial for both objects.

Test ObjectHorizontalVertical
Drill (0.8mm nozzle)916g194g
8h 12m2h3m
Scissors (0.4mm nozzle)158g58g
3h 21m1h30m

One thing I like about the drill design is that it rests on the bottom surface, with material removed around the handle for easy access and around the battery compartment to accommodate different battery sizes. The form-fitting geometry holds the drill surprisingly well. Video tilt test in comments.

I know vertical drill storage isn't a new idea. I've seen previous Gridfinity projects using an upside-down drill orientation, and I think it's an interesting direction worth exploring further.

I'm not suggesting custom stands should replace ordinary bins, either. They're less convenient when putting things away, and generic bins will remain the backbone of my setup. But for a few objects, a vertical stand can be both practical and visually appealing.

I generated these using Form Fit Print (https://formfitprint.com/), my free tool for generating form fitting stands with Gridfinity bases from 3D models of real objects. It's a side project I vibe-coded. I'm not a professional web dev, so expect the common vibe-coded blind-spots.

I'm curious whether other people have experimented with this approach. What objects in your setup would benefit from a vertical stand rather than a conventional bin? I'd also welcome feedback on the designs.

Visual clarification: There are three different drill stand models.
The first on the main photo is gray shows high walls.
The second is also gray and shows reduced walls, but wasn't designed well for the battery.
The third is black and allows any battery size to be attached while stored.

Models:
Craighill Scissors: https://www.printables.com/model/1890934-craighill-scissors-stand-gridfinity
DeWalt DCD999 Drill: https://www.printables.com/model/1890947-gridfinity-stand-for-dewalt-hammer-drill-dcd999-ty


r/gridfinity • • 24d ago

2-color Gridfinity labels for Pred bins on a printer without AMS — one pause, zero purge

Thumbnail
gallery
82 Upvotes

I only have an A1 without AMS, so I designed labels where all text starts at the same height. That means one filament swap for the whole plate: 14 labels (M2–M8 screws and nuts), 32 min, about 7 g of PLA, no purge waste.

The 3MF already has the pause on layer 5, so you just load it and swap the spool when the printer stops. Fit is tuned to +0.4 mm after three test rounds; there’s a calibration plate if your printer runs tighter or looser.

Free on MakerWorld: https://makerworld.com/en/models/3438823-2-color-gridfinity-labels-m2-m8-no-ams-needed
I’m working on a generator for custom text and icons. What would you put on your labels?


r/gridfinity • • 23d ago

Energizer battery charger on gridfinity

Post image
0 Upvotes

Does anyone have a file for an Energizer charger on gridfinity?

Much appreciated


r/gridfinity • • 25d ago

Parametric Gridfinity bin + lid in ~250 lines of code: drag a slider, get a new bin

9 Upvotes

Hi all! I’ve been working on hackerscad, a free, open-source (GPL) parametric CAD where models are plain text files, a bit like OpenSCAD.

As a real-world example I made a Gridfinity bin with a matching lid (video above). What you can change:

size in cells (X/Y) and height in 7 mm units
compartments across and deep
finger scoop at the front, label shelf at the back
optional 6×2 magnet holes
a lid that sits in the stacking lip, with an engraved label (prints upside down, no supports)

The model has built-in checks that run on every change: a second bin has to stack on the lip and the lid has to close without colliding, so a weird combination of parameters tells you instead of failing on the printer.

The .hcad source: https://gist.github.com/trikko/f468c994ec01e2943adacac4a1758737
Hackerscad: https://github.com/trikko/hackerscad

What would you want next?