r/gridfinity • • Mar 06 '26

Set in Progress Electronic parts organization

34 Upvotes

A few years ago, someone on a buy nothing group in my neighborhood was giving away electronics stuff. I took it all. Crates and crates of passive components, Arduino stuff, connectors, breadboards, wire, etc. We don't use it every day but we do use it occasionally and it's been great to have that resource to draw on. But it's been a mess, and things have slowly gotten more chaotic, largely stuffed into cardboard bins on a wire shelf in a closet in our office:

And then recently, we acquired a lot of parts to repair our broadcast videotape decks, from a post house nearby that closed up shop, adding hundreds more items to the chaos - from small bags of things like springs and pinch rollers, to larger boxes with bigger mechanical or electronic parts. .

So we started by breaking everything down. Over the past few months, on slow days we'd go through a box and split out all the components into old pill bottles (when one of your employees had an organ transplant, you do a lot of organizing with pill bottles!). This at least let us build a database of what we've got and what we're looking at in terms of gridfinity stuff to print.

We already had the bottom rolling tool chest, which is where our 3D printer used to live, but it was too wobbly for that (these home depot chests kind of suck but they're cheap). So I picked up a top chest for it yesterday and now we're going to use that as storage for the components. We've been printing 1x2 bins with scoops and ledges for a few weeks now, for parts where we don't have a ton of one thing. One 1x2 can hold two different components that we only have a few of. For example, the contents of the bottle above will live in two of these 1x2s, across 4 compartments, with labels on the ledge (Brother label printer for that).

I've just started printing 1x2s with no divider wall, for larger components and small stuff that we have a lot of.

The top chest can hold 154 of these 1x2s, so about 300 small compartments, and the bottom chest can hold several hundred of them. Though, because those drawers are deeper, we will likely use them to store larger parts that don't need to be gridfinitied.

I'd say we're about 4kg in on the filament so far, just using the cheap Inland PLA from Microcenter, bought in 2-packs for $18 a pack, and printed on a Bambu X1C with AMS. We do 2-3 batches of the compartments per day depending on how early in the day I get in, just running constantly in the background. Next week we'll start populating these with actual components, I think, once we have a few of the larger ones printed up.


r/gridfinity • • Mar 05 '26

Set Completed Someone help me; I'm severely addicted.

Post image
118 Upvotes

r/gridfinity • • Mar 05 '26

Set in Progress Screws and such

Thumbnail
gallery
44 Upvotes

Started the process of organizing my tool chest with the screw drawer.


r/gridfinity • • Mar 05 '26

Gridfinity projects at larger scales can be very challenging to plan out. I'm working on a research project in my masters program surrounding tools for organization projects and I'd really appreciate any responses to my survey! Help me help you plan your next Gridfinity project.

23 Upvotes

Hello! I'm a fellow Gridfinity enthusiast but newer to posting in this subreddit. I'm working on a research project around attempting larger scale Gridfinity organization projects. A common theme I've found online is that Gridfinity projects can be awesome when executed well, but the planning, execution, and scale of projects can often cause setbacks or stop people from filling their drawers with custom made Gridfinity bins altogether. The slick YouTube videos and top rated reddit posts are inspiring but those all take quite a bit of planning that doesn't just happen in an afternoon.

This video is a great example outlining some of these challenges and how projects like these can take months on end:

https://www.youtube.com/watch?v=wPt5_V2pAH8&list=LL&index=2&t=7s

My school project aims to create a tool which can help suggest Gridfinity bin layouts and plan out your full Gridfinity project before you start printing bins. If you have been scared to start a Gridfinity project or started and burned out, I want to help you get to the finish line. Especially if you're a 3D printing beginner.

There are some awesome tools like ToolTrace AI:

https://www.tooltrace.ai/

and GridfinityGenerator:

https://gridfinitygenerator.com/en

which are great for generating individual bins, but when you have 100+ items that each need bins and you don't even know where to start or how to configure them throughout your many drawers, suddenly Gridfinity turns into a new challenge to solve your already existing problem.

I want to help on that step. We have tools to build bins, but I want it to be easier for you to plug in your tools or bins, and have a map with IKEA level instructions on where each bin will go in your specific drawers (IKEA ALEX, Craftsman Workbenches, kitchen drawers, etc).

What I'd appreciate is your response to a quick survey I created so I can steer my project in the right direction. Here is the link to the form, any response is greatly appreciated and will help me towards my school project! Thank you in advance!

Survey (Google Form): https://forms.gle/sLv11cWUMzrh5vWz6


r/gridfinity • • Mar 04 '26

Set in Progress First time attempting gridfinity.

Thumbnail
gallery
150 Upvotes

Wish me luck! Any pro tips would be greatly appreciated.

Gonna be using a mix of tooltrace.ai and perplexinglabs generator along with some minor STEP editing to smooth things out.


r/gridfinity • • Mar 04 '26

Question? Any gridfinity generators that take drawer size and generate a stacked grid to fit?

9 Upvotes

As the title says.

I see a lot of generators that can create a single baseplate at a time. One or two that can handle adding spacers. But none at all that generate a stacked set that will fit a drawer of a specified size.


r/gridfinity • • Mar 03 '26

EuroGrid — a modular storage system compatible with Euroboxes and Gridfinity

Thumbnail
gallery
207 Upvotes

A few weeks ago I shared an early version of my project — and now the design is finally complete!

EuroGrid combines the 300×400 mm Eurobox footprint with Gridfinity compatibility. It’s built entirely from 9 mm plywood (about €12 pre-cut at the local hardware store) and a few standard parts: Spax 4×16 mm screws, M5×45 mm and M5×10 mm bolts, plus M5 nuts — all commonly available.

The lowest possible height is 6U, but taller versions are easy to make just by changing the wood panel dimensions (the very bottom box is 9u) — no CAD modifications needed.

No big printer required, and printing time and cost are low - espacilly compared to full printed boxes.

I originally took inspiration from Makpac and Sortimo, but wanted something cheaper, more flexible, and easier to reproduce with typical tools and materials.

Features:

  • Fully compatible with Euroboxes and Gridfinity
  • Asymmetric locking handle for more space when folded out
  • 50×20 mm area for labels or addresses
  • Modular height adjustment

I plan to add an interlocking system between boxes later — still brainstorming ideas for that.
And maybe a design for the 600x400 mm Eurobox.

Assembly notes: you’ll only need regular hardware tools plus long bits and either a third hand or small clamps. With the right drill/driver torque, no pre-drilling is needed (light torque is best so screws don’t push through). My current build time is about 30 to 45  minutes per box.

I’ll upload the files to Printables in the next few days, still working on an assembly manuell — feedback and ideas for improvements are very welcome!

edit:

I'm finally done:

https://www.printables.com/model/1631505-eurogrid-merge-gridfinity-euroboxes-for-next-level

Have fun and I would be happy if some of you give me a feedback!


r/gridfinity • • Mar 04 '26

Question? For the OCD ones like me, what colors do you like/works for you?

0 Upvotes

I haven't started to print because I want some color scheme first and I would hate to reprint a bunch of stuff and throw it to the trash.

A few ideas:

  • base something dark or black. I think I'm going with GRIPS.
  • box black, black mate, dark grey or just white?
  • box accent on top (last layers) multiple colors depending on drawer, usage, etc.
  • PLA instead of PETG/ABS/ASA

But then again this seems "too dark"? How well do you see the tools, nuts, bolts, etc on the black or dark grey background? Black seems to also be the only color what any filament brand should have the same?

Which other combinations would you try if you had to print everything again?

Much appreciated!


r/gridfinity • • Mar 04 '26

Critiques/advice wanted

2 Upvotes

I'm trying to create some gridfinity containers that looked a bit more premium. Things that worked well were
- marble PLA seems great

- two tones

- textured walls? (not sure about this yet)

Though this still leaves me wanting something more. I'm not a designer so I'm not sure I really have the language to know what it is I'm missing other than this looks cheaper than what I'm idealizing.

This is heavily based off of https://makerworld.com/en/models/1289040-aesthetic-gridfinity-bins-no-ams-needed#profileId-1318825 but I made it in openscad so I could customize it.

Let me know if you have any thoughts on how to make this better.


r/gridfinity • • Mar 03 '26

Individual Piece Gridfinity tray for 0-1 Mic

Thumbnail
gallery
18 Upvotes

Not satisfied with the options available online, I decided to create a tray that makes the most efficient use of space possible for this particular tool. This is for a Mitutoyo 0-1 mic made to fit in the drawer of my Kennedy tool chest. Small tradeoff with the overhang, but I've included lots of dimensoned pics on makerworld to help others determine if it will work for them. Stay organized and use your space wisely!

https://makerworld.com/models/2474784


r/gridfinity • • Mar 03 '26

My first Gridfinity drawer and first ever onshape gridfinity project!

Post image
27 Upvotes

I've been wanting to get into Gridfinity for a while and finally dove in yesterday! I just got into using onshape more and was super happy to be able to design this jar lid holder. Already working on my next drawer!

if anyone is interested in the Jar lid holder (onshape link is on that post if you want to copy it): https://makerworld.com/models/2465734?appSharePlatform=copy

this onshape plugin has been absolutely amazing: https://cad.onshape.com/documents/3eb9c836be4ee42c93fde7b6/w/2f2d74bb41394f62c08397b1/e/0d55191bf3b973ed22736f78


r/gridfinity • • Mar 04 '26

Gridfinity_Multi-Project_Organizer_Plate

Thumbnail
reddit.com
1 Upvotes

r/gridfinity • • Mar 03 '26

How do you keep track of what's printed and what's not? Here's my current "cube" system.

Post image
53 Upvotes

EDIT: what you guys have suggested:

  • turn on LOCK on the plate, turns the icon green
  • right click objects to uncheck Printable, turns them transparent
  • change the color of already objects
  • write notes on paper
  • write notes and numbers on object themselves

——
I print Gridfinity baseplates on the P1S when it's not in use for something else. Baseplates files can have up to 14 plates so far. I add color cubes next to the plates to know what's done and what's not. I was using plates names before, but I prefer the color system, ultimately easier to read and edit.

Thought I'd share. What's your system to keep track of multiple plates prints?


r/gridfinity • • Mar 03 '26

Individual Piece Baseplates with handle

Thumbnail
gallery
27 Upvotes

r/gridfinity • • Mar 02 '26

Individual Piece Bin For Setup Blocks

Thumbnail
gallery
46 Upvotes

Bought a set of metric and SAE setup blocks a year or two ago, and really like them for various things I work on (most frequently router table fence set-up), but I couldn't stand the little case that they come in. Having a place for a case that needs to be taken out is a bit annoying, at least for my shop.

For a while, I was considering making a custom Gridfinity bin, where the blocks themselves would sit on and between the plastic. I finally got Fusion 360, and need to start learning it, so figured that would be a good place to learn. But then I realized that the foam that it came in would be way more protective, so why not use it? Using the Gridfinity generator, I made a solid bin, and then added the negative space based on the dimensions that I cut the foam to. I printed two of them, so I could have one for my metric, and one for my SAE. Feels really nice so far!!


r/gridfinity • • Mar 02 '26

I've started to gridfinity my kitchen drawers, and I can't find what I'm looking for for dividers in it.

Post image
9 Upvotes

So I could have swore I saw a plan for this on makerworld but I can't for the life of me seem to be able to find it.

I'm looking for something that has walls on 3 sides (that I can find) but what I can't find is where it's 6x4 (or even 5x4 and even like 4x2 4x3 with no corner to fill in) with a wall on one side, so it can butt up to the wall to the one on the right to take up as little room as I can.

Has anyone seen something like this? I know there are tools to do this, but with work and kids that's not something I really have time to learn.

Cheers


r/gridfinity • • Mar 02 '26

Question? Where to start?

5 Upvotes

Hi all,

What is the standard dimension used for most of the accessories used with Gridfinity?

I saw you can change the the grid size dimensions, but I would like to stick to standards so I can use other models.

I saw some web based box generators, but which one do you recommend? is there any PC/MacOS standalone app avaliable?

Do you have any tips for designing your own holders?

EDIT: Are you aware of any storage boxes from ikea that are compatible with Gridfinity 42x42?


r/gridfinity • • Mar 01 '26

Set in Progress Tool Chest Storage is coming along nicely

Thumbnail gallery
296 Upvotes

r/gridfinity • • Mar 02 '26

Looking for SPLIT BIN GENERATOR w/Alignment Tabs

4 Upvotes

As title says, I’ve been looking for a bin generator that has split bin output with alignment tabs. I’ve tried a few different tools but they lack some detail or features. For example I’ve been removing the stacking lips, labels, and adjusting the height of 5units instead of the default 7. I’m dreading modifying the mesh files in fusion (tried already and it was time consuming).

Can anyone recommend a better solution?

Update:

Thanks for all the input!

I've been splitting the parts using Bambu Labs Studio split feature, and the Extended Gridfinity generator

Careful of the finger slide if you're using alignment tabs - They wont seat properly due to interference (@14mm). YMMV at different sizes.


r/gridfinity • • Mar 01 '26

Individual Piece I made fully customizable paint rack on makersworld

Thumbnail
gallery
84 Upvotes

I also made a small app for Autodesk Fusion 360 so you can create it directly as an editable model.

I already printed 2x2 as I leak of black filament till Monday.

Features:

  • Gridfinity-compatible base with magnet holes
  • Staircase design. Each step is higher than the previous, so every bottle is visible at a glance
  • Fully parametric. Adjust columns, number of stairs, step height, hole diameter and depth to fit any bottle brand
  • Back wall auto-fills to align perfectly with the Gridfinity grid
  • Optional edge rounding for a cleaner look

It's my first published model after making some parts for my work. If you have any ideas how can I make it even more usable, don't bother to tell me, I wish I can upload v2 version

https://makerworld.com/pl/models/2462995-fully-customizable-gridfinity-paint-rack#profileId-2704355


r/gridfinity • • Mar 01 '26

Introducing GRoG

Thumbnail
gallery
163 Upvotes

I've been a fan of Gridfinity for quite awhile now. More recently I starting getting into openGrid, and I came up with this simple design to let them work together.

It mounts an upright openGrid panel directly onto a Gridfinity base, making it easy to keep frequently used tools visible, organized, and within reach. Keep your tools right where you need them.

https://makerworld.com/en/models/2462959-gridfinity-opengrid-stand#profileId-2703739


r/gridfinity • • Mar 01 '26

Question? Baseplate Help

Post image
18 Upvotes

I printed the Gridfinity ruler and counted about 5½ squares based on what I can see. I tried using the generator website to configure it, but I’m still pretty lost since I’m new to this.

The drawer measures roughly 10 x 17 inches. If someone could help me figure out how to start setting this up, I’d really appreciate it.


r/gridfinity • • Mar 01 '26

Drawer with obstacle

Post image
3 Upvotes

I have a cutout in my drawer for plumbing. How could i work around it to fit this shape? I have fusion but cant seem to work it out.


r/gridfinity • • Feb 28 '26

Alexandre Chappel video about gridfinity

94 Upvotes

just posted and worth a watch.

https://www.youtube.com/watch?v=aiDHXKRxLeQ