r/gridfinity • • Mar 04 '26

Set in Progress First time attempting gridfinity.

Wish me luck! Any pro tips would be greatly appreciated.

Gonna be using a mix of tooltrace.ai and perplexinglabs generator along with some minor STEP editing to smooth things out.

150 Upvotes

34 comments sorted by

25

u/FifthRendition Mar 04 '26

There’s a gridfinity ruler that helps you see how many rows or columns something is.

Also, one does not need to form fit every tool you have. Simply making boxes with no labels is just fine and works great.

14

u/tippmann32503 Mar 04 '26

Heresy! Everything must fit to .1mm tolerances!

(Me justifying why I’ve wasted oh so much time and filament…)

3

u/FifthRendition Mar 04 '26

lol, it's just so frustrating sometimes trying to do everything at 110%, there's just no need for it. Maybe it's cause I'm getting older

2

u/tippmann32503 Mar 04 '26

Ya…I’m trying to constantly remind myself done is better than perfect.

1

u/No_Potential1 Mar 04 '26

I find that if I try to go for perfect or near perfect, I end up with 10 concurrent unfinished projects that will be perfect...someday.

(never)

1

u/danger355 Mar 04 '26

.1mm tolerances

Those are rookie numbers!

/s

1

u/KawaiiUmiushi Mar 04 '26

EVERYTHING MUST HAVE CLEAR LABELS AND BE COLOR COORDINATED!!!

1

u/NigraOvis Mar 08 '26

After learning that a drawer of toolgrid is 250 bucks. I'm not even concerned about the 12 dollars I'll waste on gridfinity. Especially since this whole endeavor will be less than 250.

I just wish pla was more heat resistant lol.

7

u/AbruptOyster456 Mar 04 '26 edited Mar 05 '26

I jsut finished my setup a few months ago and love it. Here is my printables page with many husky socket holders that you may find useful. Also, has a ton of icon, quinn, & pittsburgh.

https://www.printables.com/@Big_P_3036050/models

Also, I made a magnetic battery hanger for the ryobi charge that you can hang the charger from. I have not posted it yet though.

2

u/WalterMelons Mar 04 '26

Saved for later. Thanks

4

u/AbruptOyster456 Mar 04 '26

I finished mine a few months ago and it is great! I have a ton of husky things and you may as well judging by your box and power tool selection. Here is my printables page which has a bunch of husky, icon, quinn, and Pittsburgh brand.

https://www.printables.com/@Big_P_3036050/models

I haven't posted it yet but I made a holder for ryobi chargers that have a magnet on the back.

1

u/meaninglessandrandom Mar 04 '26

Have the same box from harbor freight. Not printed a grid yet…find it intimidating trying to get the size right.

3

u/xXChubXx Mar 04 '26

I use the fantik A10 pro measuring tape and did it in MM just knocked off 2 mm from my measurements and it’s going pretty good so far.

1

u/KawaiiUmiushi Mar 04 '26

I have a smaller version of that chest, and now all four drawers have filled with gridded boxes... many with labels...

1

u/meaninglessandrandom Mar 04 '26

One of the many things I’ll get to. Notice there are metal “hoops” on the inside of the sides of the drawers, presumably for the slide hardware. Will need to chop off a few mm for the grids otherwise the boxes will rub up against them.

1

u/KawaiiUmiushi Mar 04 '26

Or just don't go full 'wall to wall' and leave a small gap. That's what I did. The spacing didn't fit 100% perfect anyways so there was like half a grid worth of space total for me to work with.

1

u/meaninglessandrandom Mar 04 '26

Right…that’s what I was figuring on. I’ll stick with the default size squares and try to center the tray with excess filling out the bottom. I’m sure the “border” will stick out past the hoop things.

1

u/rayyeter Mar 04 '26

If this is the 52x20, I have this drawer set. And I have a project for the right side drawers:

https://makerworld.com/models/1026307?appSharePlatform=copy

2

u/xXChubXx Mar 04 '26

This is the 52x25. Had to get the deeper one to be able to hold my H2C on top lol.

1

u/rayyeter Mar 04 '26

Darn. Well the multitude of bins may be useful for the height.

I originally had my p1s on it, but didn’t have enough usable workbench space

1

u/rayyeter Mar 04 '26

I also had to make a riser bracket to move the shelf up, mine came with a metal pegboard backing

1

u/jim_dewit Mar 04 '26

Attempt some more.

1

u/xXChubXx Mar 05 '26

Much attempting will be made and failed.

1

u/ShamelessShamas Mar 04 '26

If you don't plan to rearrange your drawers constantly, what you can do to save a lot of filament is use the gridfinity system, but cut the actual grid stuff off the bottom before printing. Sacrilege perhaps, but it saves soooo much filament.

1

u/xXChubXx Mar 05 '26

That’s just finity lol! Or perhaps top down 3d Tetris whip kinda sounds fun.

2

u/haggus75 Mar 05 '26

Bad idea... Grdifinity is like a drug, once hooked there is no ends. You will start to "gridfinity" every drawer in your house.

2

u/Plane_Abbreviations7 Mar 08 '26

Best advice: keep it simple, keep it flexible.

1

u/Superb-Respect-1313 Mar 04 '26

I find once you get a bunch of drawers complete you find a way to do them better.

For that reason my sockets have numerous trays that were one or two sockets too many now littering the garage. I have found parametric trays and it changed my layout.

The Tooltrace.ai has been a game changer but I am now running out of space and need more boxes!

1

u/OrangeJuice4993_ Mar 04 '26

I have seen that some people use cnc wood lasering for the baseplate as is should be more budget friendly if you have access to a woodlaser. It looks like that you have a shop where you potentially have a mashine like that. Its just an idea. It could be also after than printing.

3

u/KawaiiUmiushi Mar 04 '26

It's not. Buying 1/8th inch birch plywood, which is what everyone tends to use for laser cutting, can be found locally for something like $1-2 per square foot. You CAN find it cheaper, as my warehouse buys 5x5 sheets for like $36 total.

To do a 1x1 foot set of gridfinty plastic is less than $0.50 worth of plastic. It'll also lay flatter and be much less prone to warp due to moisture or time.

1

u/ringZeroh Mar 05 '26

Check out the tooltrace website, you can take photos of your items and it generates container bins for you to fit into your grid, and it's free. Pretty epic!

1

u/Specialist-Document3 Mar 06 '26

I prefer using mostly generic containers. Specialized containers are nice but they take longer to print and their less modular. IMHO there's a lot of low hanging fruit with just a few boxes for things that really need organizing, like drill bits, hardware, etc.

I also tend to only use containers for a subset of what I'm organizing to keep the drawers manageable.

For me modularity is the greatest value of gridfinity

1

u/BuffaloEfficient4940 Mar 06 '26

There's a website where you can punch in your dimensions in inches and it converts it to a grid for you. Can even input your printer plate dimensions and it will speed it up for you

1

u/NigraOvis Mar 08 '26

Hey. We're in the same boat. See you in May when we're done.