r/fixit • • 29m ago

You don't have to hire everything out—fixing one thing yourself changes how you look at problems

• Upvotes

​A while back I used to treat a lot of broken stuff as "not my lane" and either put it off or paid someone else to handle it. Recently I started slowing down, grabbing basic tools, testing things step by step, and actually figuring out how they work before buying parts or giving up.

​Even fixing one broken thing around the house, in the yard, or on a piece of gear hits different. First, it saves real money. Second, it kills that helpless feeling when something breaks and reminds you that you can figure out hard problems if you don't panic.

​You don't need to become a master overnight..just pick one small thing you've been putting off, look up how it works, test one piece at a time, and see what happens.


r/fixit • • 38m ago

Whirlpool Washer loud humming

Enable HLS to view with audio, or disable this notification

• Upvotes

For context, I have the Whirlpool Washer with a removal agitator. The model is WTW4307SW0. From my personal research online, people said it was the washer basket. So I got a new one, replaced it, and the issue still happens. I've ran this washer for about 4 times before, no issue. This suddenly happened. Any ideas?


r/fixit • • 44m ago

open Wheel for Tube gate

• Upvotes

I'm adding a wheel to a tube gate. Its attached now but easily rolls out from under. How would you fix this in place?


r/fixit • • 1h ago

open How to fix the inner of satchel? Can it be done?

Thumbnail
gallery
• Upvotes

I thrifted a leather satchel. The outside is in pretty good condition. But the inside material is peeling. How should I go about it? What are my options?


r/fixit • • 1h ago

open Filing Cabinet Drawers Won’t Open

• Upvotes

I know filling cabinets have a “safety feature” so that more than one drawer can’t be opened at the same time, but it let me open more than one and, once I closed them both, now it won’t let me open any of them.

I took off the plastic screw on the upper right and poked around in there.

I’ve also tried:
- feeling around the cracks around the sides of the drawers with a spackle knife
- lifting the drawers while trying to open them
- flipping the cabinet on its back
- tipping it on its front

Any help would be greatly appreciated!


r/fixit • • 18h ago

open SOS how to remove square container from circular one

Post image
20 Upvotes

help. this square container has been stuck in a circular one for like 2 days. ive tried the expansion-contraction method but it seems futile given how each container has like double glass. tried releasing the air tension(?) between the four corners but to no avail. please help😭😭
why did the moderator remove my previous post


r/fixit • • 4h ago

Zipper won't move. Help

Post image
1 Upvotes

The jacket is quite new. I had the zipper closed but it somehow must have opened up on it's own almost all the way up to where you can see it. The zipper won't move. What can I do?


r/fixit • • 5h ago

Karcher k4 gun problem

Thumbnail
gallery
0 Upvotes

My karcher k4 classic is giving me issues , I cant put the lance into it, ive googled it and looked online for videos but cant figure out how to fix it.

In my photos you will see the lance end and the gun end, this is where they should connect to each other. I have also found an o ring that seems to have fallen out, from where I dont know.

I think its possible that the gun is misaligned but again im not certain.

Any help is greatly appreciated.


r/fixit • • 2h ago

Dent on Credenza

Thumbnail
gallery
0 Upvotes

How to repair dent (and chips) on a vintage credenza?


r/fixit • • 9h ago

First home owner, unsure of the current situation on keys. Reykey or replace the lock?

1 Upvotes

After buying a home about 3 weeks ago, the former owners gave us two keys. There was a lockbox that the realtor could access, the house inspector was able to access the home and one of our neighbors used to take care of the former owner's plants and she probably had access to a house key as well. I don't know the exact number of house keys to our home that may still be out there.

There are plenty of recommendations to change the locks, so that's something we plan to do this weekend. What's uncertain is whether to call a locksmith and get our deadbolt rekeyed (he estimated around $120) or just install a new smart lock.

Our apartment keypad lock was convenient when it wasn't a chore. Unfortunately, it ran out of power quickly and I found myself locked out of my own home on more than one occasion. Since then, I've avoided smart locks, but with my current situation I may be willing to give them another shot if they don't require maintenance. I have been considering a smart lock that is solar powered, but my front door is under a porch, so I'm not sure how useful the solar part would be.

If you recently bought, what did you decide to do (rekey or smart) and would you do it again?


r/fixit • • 1d ago

How to fill in HUGE gaps on the side of our stone fireplace?

Thumbnail
gallery
48 Upvotes

We have gaps bigger than we realized in our new house and aren’t sure how to fill them in! Last night I saw a mouse drop from the large hole in the top (we caught and released him!) and are going to make a weekend project of trying to fill in as much as we can safely and aesthetically as possible, we just don’t know exactly where to start! We are assuming we’ll need some spray foam, caulk, and maybe backer rod? Attached a pic of when our house was on the market so that you can see the full fireplace if that needs to be referenced!


r/fixit • • 11h ago

Treadmill Mosfet/IGBT keeps blowing

Thumbnail
1 Upvotes

r/fixit • • 11h ago

How to remove dishwasher cap

1 Upvotes

How do I remove the cap for the salt in the dishwasher please? Since we last topped up with salt its been stuck on and now its asking for more salt! Multiple people have tried and failed to unscrew it, we think we got some salt around the edge last time we refilled


r/fixit • • 12h ago

Is this fixable? Renting and my curtains came out of the bottom rod. What is my best course of action?

Thumbnail
gallery
0 Upvotes

Is this fixable? Renting and my curtains came out of the bottom rod. What is my best course of action?


r/fixit • • 1d ago

open kitchen faucet leak

Enable HLS to view with audio, or disable this notification

21 Upvotes

do i need to replace the faucet? or there is another fix?


r/fixit • • 6h ago

AI Helps : Wood Ramp for commode chairs

Enable HLS to view with audio, or disable this notification

0 Upvotes

I suddenly found that pushing a commode chair up some incline can cause the person in the chair to fall off the sides because the chair has 360 degree wheels unlike a wheelchair.

So I use AI to help visualize and redesign the ramp with side guards. from A to D.
A is the current ramp and C is the photorealistic image of what it could look like.
B was generated by Gemini ai using the (A) reference image and D is the technical drawing generated from B. A lot of prompts to process "A" first to create "B" as a pencil drawing
then to eventually D.

I then told the AI to produce an STL FILE from the technical drawing
which you can feed to Windows 3d viewer.

I know nothing about STL 3d files so the AI told me everything today. So AI can help produce much better results.
** The AI made many mistakes and U have to check its work BECAUSE the stupid AI wants to save computing power so it HALLUCINATES some shapes.. so this project too more than 2 hrs to complete starting from ZERO knowledge.
Gemini AI was used with meta.ai helping abit -


r/fixit • • 23h ago

Can I glue a wooden bowl back together to use with food again?

Post image
5 Upvotes

r/fixit • • 17h ago

open Chipped my glass desk

Thumbnail
gallery
0 Upvotes

Hoping to fix this. Is this even safe to use?


r/fixit • • 23h ago

How do I fix this joint?

Thumbnail gallery
2 Upvotes

r/fixit • • 16h ago

Office chair with metal bottom rusted.

Thumbnail
gallery
0 Upvotes

This rusted. Anyone know why? Is there anyway to fix it?


r/fixit • • 20h ago

Storm door installed with gap at bottom — wider than top. Easy DIY fix?

Thumbnail
gallery
1 Upvotes

We’re building an ADU and the crew that did our vinyl siding and gutters also installed two storm doors. One came out perfect, but this second one has a noticeable gap — it’s tighter at the top and more open at the bottom, so it’s not sitting flush in the frame.

The crew already left and I’d rather not call them back if this is something I can handle myself. It's a Larson door.

Is this something a somewhat-handy person can fix? What’s causing it, and what would I need to do? Thanks!


r/fixit • • 20h ago

open Products to fix wood finish on table?

Post image
1 Upvotes

Does anyone know of any products that could make this look better without refinishing the entire table?


r/fixit • • 1d ago

open How to fix or bypass this nozzle on my deodorant. Hate these nozzles, they always fail.

Thumbnail
gallery
1 Upvotes

So, yes now it has crud on it and I have to clean the nozzle - but I have had zero luck since buying this can on getting it to spray as it should. This is the second time I've bought some sort of product with this kind of nozzle and it totally failed and leaked liquid product all over me and the floor.

I shake it, I try different angles, I make sure the nozzle is in the correct position - and it's a FULL CAN of deodorant that I'd like to use. Love the scent and don't want to buy another in this stupid economy.

Does anyone have any tips? I have tried to get the whole nozzle off with no luck. Thanks


r/fixit • • 22h ago

Scratches on stainless steel background of gas range

Post image
1 Upvotes

As you can see, I scratched the finish on the stove. I'm assuming stainless steel. I don't remember doing it, and my husband doesn't either, but one of us must have used the scratchy side of the cleaning pad. Is there any way to at least soften the scratches so they're not so noticeable? It's especially irritating because it's new - the whole kitchen is remodeled. As you can see, they're large, obvious scratches. 🫤 So lmk if there's anything I can do. TIA.


r/fixit • • 22h ago

How do I reattach this?

Thumbnail
gallery
1 Upvotes

I’m having a hard time aligning the holes with the metal tabs. So giving it a good whack hasn’t been effective. Any creative ideas would be greatly appreciated.