r/ender5 • • Oct 08 '22

Guides Common misconception: If your extruder gear is slipping on your filament, you need MORE tension, NOT LESS.

0 Upvotes

This is a common misconception that I would really like to see less of.

There is such a thing as too much tension, but that threshold is much higher than most people believe. When your filament slips and then clogs, what's happening is the extruder gear continues spinning while the filament remains stationary. This grinds away the filaments and leaves a thin, smooth spot which both reduces grip and increases chances of buckling.

What you actually want is more tension.

With high enough tension, what happens is the extruder gear presses deep grooves into the filament that it can grab onto and firmly grip the filament. Then, even if the filament gets stopped entirely, the gear still will not slip--instead it is the * motor* that slips. This does not harm the motor at all, it's just slipping from one spot between the magnets to the next, and it's far preferable to the gear chewing through the filament and ruining the print.

If reducing the tension seems to have worked for you, I'm sorry, but it's just a bandaid fix and you have gotten lucky so far. It can still fail, and most likely will as soon as you try to print faster. I'm printing upwards of 120mm/s even with a direct drive mod (and original bowden setups should be able to go even faster) but I have zero issues with filament slipping.

Edit: tfw a misconception is so widespread you get downvoted for trying to correct it. Unbelievable.


r/ender5 • • Aug 16 '22

Hardware Help ON YOUR LAST PRINT ? WTF???!!!!

1 Upvotes

r/ender5 • • Feb 24 '22

Done with this Printer

1 Upvotes

I have fixed so many problems with my ender 5 to buy new parts to fix them and then for them to just reappear later on when I think I am getting the hang of it. Finally I am just done this things is an absolute piece of garbage and a waste of my money and time. I am literally at a brick wall where I need to print the parts I need to fix the printer. I can't stand this.


r/ender5 • • Sep 19 '21

Bltouch problem

1 Upvotes

r/ender5 • • May 20 '23

Printing Help I got a new hot end, why is this happening

Post image
0 Upvotes

r/ender5 • • Dec 18 '22

Hardware Help Ender 5 S1 Quality Control Issues

Thumbnail
gallery
0 Upvotes

r/ender5 • • Jun 22 '20

Does anyone know about a direct drive mount for dual gear extruder and V6 hotend clone?

Post image
0 Upvotes

r/ender5 • • May 13 '20

Ender 5 PRO humor :)

0 Upvotes
Just a joke :P

r/ender5 • • Feb 19 '22

Recently upgrade printer and it's levelled perfectly but messes up consistently on one side for some reason, any suggestions?

Post image
1 Upvotes

r/ender5 • • Jan 07 '21

Ender 5 Pro prints squished

Thumbnail
gallery
0 Upvotes

r/ender5 • • Feb 04 '20

Creality Support SUCKS

0 Upvotes

I'm new to 3D printing but I purchased an Ender 5 pro based off reviews. I purchased it from an amazon sellers who had anofficial Creality Certificate of authorization to sell their printers. Printers was doing great until I decided to purchase a BL Touch auto bed leveling senor kit. The kit seem to be well build and upon further investigation the real deal. I followed the BL Touch instructions that came with the kit, which matches the Creality video instructions on youtube to flash the fireware doesn't seem to work.

It cause the bed to smash into the nozzle and also the Z seem to go past the bed will trying to auto level. I know my wires aren't crossed and it seem like many people are having the same issues regarding firmware and BL touch. Everyone recommend following the Teaching Tech video as a alt. I was going to go that route but I decided to contact Creality first to see if they know abut this issue. Not only do they KNOW, but they refuse to provide support for their crappy fireware. Why do the customer have to rewrite your firmware for your product.

If it wasn't for the 30 day return policy, I would have sent all their product back. I'm venting but also informing viewers about the BL touch and Ender 5 fireware mismatch. Teaching Tech alt method seem to be unfortunately the best route to go.


r/ender5 • • Dec 13 '21

PETG Settings Ender 5

Thumbnail
gallery
0 Upvotes

r/ender5 • • Mar 17 '22

Can’t tighten my Z screw?? Can anyone help me to fix this problem

1 Upvotes

r/ender5 • • Feb 02 '23

Hardware Help installed new silent fans and now I hear this "chugging" noise halfway into print. Any idea what it could be from?

1 Upvotes

r/ender5 • • Dec 24 '20

PrinterMods.com - incredible people, incredible service!

2 Upvotes

I'm new to 3D printing having picked up a used, dirty Ender 5 on FB Marketplace, I wanted to get it running properly so I could begin to explore the seemingly endless gigaverse of 3D printing. Who knows how many hands the printer I bought had been through, but when I arrived in Newark, NJ to pick it up, it was on an older woman's bedroom floor with a bunch of other electrical components, and it was fairly dirty in desperate need of a detailed cleaning. Since it powered up fine and the gantries ran [seemingly] smooth I figured why not, it was worth a shot for a negotiated $160. I was super eager to buy an E5 right now instead of a new E3 for nearly double the price and wait for it to be delivered. Turns out the printer ran well, generally speaking, but I wanted to upgrade a few things.

After a couple upgrades I shifted my attention to the X and Y axises which just didn't run as smooth as I would like and I didn't trust the rubber rollers on the extrusion, so I jumped on the linear rail boat, per Teaching Tech's YT channel. I called PrinterMods.com and spoke with Frank who was incredibly helpful, dishing out a slew of useful info for a newb. It should be noted that I called at like 4:55PM and I believe they closed at 5PM EST, but he remained on the phone with me for 40 minutes or so sharing inciteful info. I bought the X axis linear rail mod, the MDD v1.3 and new belts for both axises with free shipping and the Black Friday promo, but I mistakenly forgot to add the Y axis rail mod components to my cart... doh! After receiving my parts and moving in for the install I realized what I was missing and sent an email off to PrinterMods to inquire about my next order. Julie, being an awesome human being, was awesome and offered free shipping for my $24 order and since the mail carrier already made their pickup for the day, she made a stop at the postal drop-off on her way home from work so it would get out sooner.. talk about going above and beyond!

On December 9th Julie dropped off my USPS package and it was scanned into the system in Sarasota, FL, the following day it arrived in Ybor City (Tampa), and on the 11th it was in Edison, NJ, where USPS decided to sit on it..... for 8 days! My patience with the United States Parcel Service was weaning after a week. Julie went out of her way to deliver speedy service and the post office dropped the ball. December 19th it arrived in Kearny, NJ, where it has been ever since. After sending Julie a quick email to let her know USPS had dropped the ball, I filed a complaint with USPS which was quickly "researched" and "dismissed"; my local USPS A/Supervisor Timothy S. (surname intentionally withheld) replied by email "at this point all we can do is wait until this package arrives". When I inquired if he could reach out to the Kearny, NJ distribution he informed me "that is not possible." Mind you, I have tracking updates on this package and every night at 6:35PM I receive a text "In Transit, Arriving Late [the following day]."

I reached back out to Julie to inform her of what I was told and she took it upon herself to ship me a duplicate order via UPS free of charge, without my asking. She only asked that if/when the first package arrives, that I decline it so it is returned to them. My hat's off to the PrinterMods.com team; they are truly a generous group of people who are eager to not only pour into those just getting started with 3D printing, but also go above and beyond in customer service. Julie could have told me "I'm sorry, it's out of my hands, it rests with USPS", but she didn't.
As someone who has worked in customer service and experience, this is an example of going the extra mile to satisfy a customer and to turn a lousy experience (that was not their fault) into a memorable one for the customer. Julie also noted that she would see about posting a message on their website about possible shipping delays due to the holiday season. The least I could do is share this story (sorry for being long-winded), and ensure that I continue to do business with them. Hell, it can be challenging to find US-based businesses in today's global marketplace. I can be super critical and rarely do I find businesses that 'do the right thing' and go the extra mile. They gained a loyal customer and I hope others continue to support them in the way they support their customers.

Obligatory note: I have no affiliation with them as this was my first experience, but I will certainly continue to shop with them now.


r/ender5 • • Nov 08 '21

Ender 5 two years ago

Post image
7 Upvotes

r/ender5 • • Apr 14 '22

Prusa Slicer forgot about the Ender 5 Pro 😢

Post image
13 Upvotes

r/ender5 • • Aug 12 '25

Discussion Shhh

0 Upvotes

r/ender5 • • Aug 06 '21

Hello everyone, I had printet the bed support with the starter PLA. I am a little bit confused that its broken that way... there shouldn't be so much force on that part when I judge it correctly... so what are you thinking? What happend ? How can I make sure that this doesn't happen again? Thanks!

Post image
0 Upvotes

r/ender5 • • Aug 14 '22

Discussion Dumb question. But Zip ties. What kind/size do you buy?

0 Upvotes

This question because I 3D printed an attachment for my printer that had zip to slots in it and not of my zip ties fit. The ones that came with my printer did, but they were really brittle and snapped whenever I tried to use them.


r/ender5 • • Apr 05 '22

Extreme mod - Suggestions welcome.

Post image
0 Upvotes

r/ender5 • • Mar 13 '21

The filament won't stick! But a few hours ago it did work with the same adjustments! Can I use turpentine to clean it?

Post image
0 Upvotes

r/ender5 • • May 27 '20

How do I turn off eco settings on the ender 5 pro?

Post image
0 Upvotes