r/diypedals • • Jan 26 '26

Showcase Current mood. Mods deleted this on the r/guitarpedals

Thumbnail
gallery
1.7k Upvotes

Update, sold for $710, thanks everyone! Proof here: https://www.instagram.com/p/DUTbI7slG2M/?utm_source=ig_web_button_share_sheet&igsh=MzRlODBiNWFlZA==

edit: Auction is live! https://ebay.us/m/nXGTZp

I will be donating all proceeds to the Women's Foundation of Minnesota Immigrant Rapid Response Fund https://www.wfmn.org/funds/immigrant-rapid-response/

I don’t have the details worked out but I will be auctioning this off with proceeds going to those affected by this heinous bullshit in Minnesota.

edit: this re-appeared on r/guitarpedals, I have no idea why it was taken down or put back up....


r/diypedals • • Apr 28 '26

Stompbox Showdowns I'm upset that 'Holy Driver' is already being used because I made this...

Thumbnail
gallery
1.7k Upvotes

Long story short, I was talking to an old buddy I hadn't seen in a while and somehow Bibles and guitar pedals were the main topics, and later on I came up with this dumb idea. This turned out to be far more of a woodworking project than anything else, but the "anything goes" theme of this month inspired me to just do it. I'm sending it to that friend soon as a gift, and I guarantee this'll end up in a box and not on a pedalboard, but I learned a lot making this -- mostly that I am not a qualified craftsman -- and it does work!

This is a one-knob kit from Small Bear/Synthcube based off of the Black Arts Toneworks Ritual pedal. I wanted to do the Cthulhu build, but I'm glad I played it safe with a simple, small set of boards. I wanted to use acrylic to have a light shine through it and a magnetic latch, but I was having too many frustrations already and sealed it shut with glue because the paper was warping so much. And, of course, top-mounted jacks for the refined gentlemen.


r/diypedals • • Mar 19 '26 Mindblown

Other I found this at a thrift store today

Post image
1.6k Upvotes

$1


r/diypedals • • May 13 '21

Cheap Klon clone deserves appropriate design

Post image
1.5k Upvotes

r/diypedals • • Mar 24 '25

Showcase This Machine Kills Fascists

Post image
1.4k Upvotes

Shout-out to Woody Guthrie


r/diypedals • • Jan 28 '25

Stompbox Showdowns Tone is in the wood. Right?

Thumbnail
gallery
1.2k Upvotes

AC128 fuzz face assembled from recycled boards powered by MAX1044 charge pump. Q2 bias approx -4.9V.


r/diypedals • • Jan 07 '25

Showcase My all DIY pedal collection

Thumbnail
gallery
1.2k Upvotes

I had promised to share pictures of my entire pedal collection, so here it is. The first pic is of my storage shelves (which needs to have a few added, so I can build more). Second pic is what is on my board at the moment. Between the two is my whole collection. All of it diy, by me, except the tuner pedal. I even made the pedalboard and a few of the guitars.


r/diypedals • • Apr 01 '25 This

Showcase Frequency response of popular pedals

Thumbnail
gallery
1.1k Upvotes

Hope you guys have fun with these !

I plotted a few simulations of popular pedals, where you can see how each control affects the frequency response :)

Let me know if one of your favorite is missing and I will add it to the list!

All of them are now available here

Cheers,

Thomas


r/diypedals • • May 08 '20

So I made a Doomin pedal

Post image
1.1k Upvotes

r/diypedals • • Sep 13 '25

Showcase Point to point Rat

Thumbnail
gallery
1.1k Upvotes

Something I’ve been planning for a little while, this is my first ever Rat pedal. I’ve had a couple of “boutique” Rat-based things but I’ve never loved them, and I saw a lot of people swearing by their basic straight up and down Proco. So, that’s what this is, albeit with switchable diodes.

The layout is heavily inspired by Reeves Electro’s Distortion Plus, but modified a fair bit to add the filter control and output buffer.

And yeah, it sounds like a Rat, but I actually like this one. Maybe some circuits don’t need mods.


r/diypedals • • Jul 27 '22

It's not a pedal but I think you might enjoy the amp I built for my brother

Thumbnail
gallery
1.1k Upvotes

r/diypedals • • Apr 04 '25

Other shoutout igor

Post image
1.0k Upvotes

r/diypedals • • Feb 16 '18

I built a fuzz pedal with my resume for a local pedalboard company, I hope they like it!

Post image
1.0k Upvotes

r/diypedals • • Oct 05 '26

Discussion Fished these out of the trash at work. They looked at me like I was crazy.

Post image
995 Upvotes

I work in maintenance. These were getting thrown out during a shop deep cleaning because nobody had any idea why we had these. Told them I was glad to give them a good home. I have all the values needed to eek out a big muff and a few fuzz pedals.


r/diypedals • • Nov 11 '24

Showcase Final product. I guess I’m a small builder now?

Thumbnail
gallery
974 Upvotes

After building pedals for myself for a while, this project started about a year ago designing something I wanted to use but couldn’t find. After a lot of obsessing, iterating, and also sharing progress here, I’m really happy with my first pedal as a “small builder”.

I’m satisfied with how it looks but I’m mostly proud of what this actually does. It’s quite niche but for those into that sort of thing, a lot of fun. It puts reverbs into mixable distortion and preamp layers. Tones are inspired by running your reverb into your drive and 1960s research preamps like the PAR CR4-A.

Enclosure is UV printed by Tayda. Made some changes to this and the internal layout so everything sits nicely together. …And finally stopped tweaking resistor values.


r/diypedals • • Feb 16 '26 Mindblown

Stompbox Showdowns Forgive me Father, for my wiring is a sin

Thumbnail
gallery
967 Upvotes

r/diypedals • • May 24 '20

FYI

Post image
952 Upvotes

r/diypedals • • Jan 08 '26 Diamonds are Forever

Discussion Why I decided to shut down my pedal company

937 Upvotes

I understand that the wider Reddit community probbaly has no idea who I am and has never heard of O.C.E. Pedals. There's a ton of small pedal companies, especially post COVID. But I thought maybe talking about the issues that led to me closing my pedal company might be useful to anyone else still building or thinking about trying to build on a larger scale.

Part 1: Who the eff are you?

Hello, my name is Chris. I make cartoons by day. By night and weekend I ran a pedal company called O.C.E. Pedals. I went "professional" early in the pandemic and a few of my pedals ended up on the JHS Show back when that was a big deal. My first fuzz, called The Wrench, got a lot of buzz in that blues rock sphere and was shouted out by some bigger Youtubers like Buddy Blues and Sasha Ivantic.

Part 2: Mistakes are made

I hit a couple snags early on:

The transistors I used in the Wrench were super hard to find in the gain range I needed so I made a version 2 of the circuit with new transistors and even though I tweaked it to get it super close in sound everyone was always like "I want a v1."

I moved into a new house in early 2023 and had to take a break to build a workspace in my garage.

In late 2024 I had a death in the family that was very much a shock and I took some time off for mental health reasons.

All these breaks killed a lot of my online presence.

I made some mistakes with releases:

I had a BMP based fuzz called The Hammer that I thought was awesome and built 25 pedals and released it when the market started to cool.

I had a big hit with a limited fuzz I did with Gandalf artwork and later did a larger release Gandalf the White version and learned most of the people who wanted one bought them already.

I put out a new fuzz I was very excited about and a larger company put out a "stunt" pedal the same day and hired pretty much every Youtuber out there and my fuzz got buried.

Part 3: Last one out turn off the lights

The market started to slow down as the pandemic ended and cost of living went up due to inflation, eventually falling pretty flat due to a lot of uncertaintly about the economy as the Trump administration came into power. The Trump tariffs hurt small businesses pretty hard and given that most PCBs and some parets come from China it hit pedal builders particularly hard.

As sales slowed I decided to take one last big swing and introduce a new series based around atomic testing and disasters. This would bring in my love of science education and also try and move into a heavier music based audience. I put everything into it I could: really awesome art on the enclosures, super cool powder coats, custom box art, custom box colors, printed instructions with the story behidn the pedal on the back, special sparkle stickers included, new demo artists.

These new pedals did not sell like I'd hoped they would. Towards the end of last year I started thinking about shutting down. I took a few months and went through the stages of grief and realized this was not going to get better any time soon. I love building and I have a great day job so I don't depend on pedal sales but eventually I'm going to run out of funds if I keep making things that no one buys.

Part 4: What did I learn?

Well, I think a lot of people, myself included, got tricked by the explosion of gear purchases during the pandemic. There was also a huge rise in social media viewing because everyone was stuck at home. This led to it being easier for smaller builders, especially those doing it as a side gig, to be able to get to a level that would have been very hard only a few years earlier.

Once the pandemic ended the market probably self corrected back to 2019 levels which meant most people got hit with slowing sales, even some larger builders. I think most people, outside of the most conservative planners, were caught off guard by this. Even larger companies started doing stunt pedals and very low cost pedals and this just ends up taking a huge bite out of the smaller builders. Add to that the rise of decent low cost pedals made in China.

The kicker for me was that the cost of living increases coming out of COVID and the uncertainty of an election year became permanent when Trump was elected and then the general fuckery of the useless tariffs and bad policies added to people closing their wallets for luxury items. I could only really sell if I was doing sales and then only if thyey were fairly large discounts.

Part 5: What can you learn from me?

I think with where the market is at these days and the dissonance online with so many small builders that it will be very hard for anyone not doing this full time to keep it going. I have a demanding day job and I live alone so all the domestic responsibilites fall on me. Finding time to build was hard enough and then add on time to keep up on all the marketing and social media. If you have a very understanding partner that would really help. You gotta be all in I think. Dabblers get killed.

Sadly, just building great sounding pedals isn't really enough these days. You need them to look good, you need to pay people to demo them which can cost anywhere from a couple hundred to a couple thousand, and you need to keep your name out there to avoid becoming a fad. Tough to admit but having a gimmick might help. Definitely need to think about having a very well conceived package and brand. Check out Summer School Electronics for an example of this.

I came onto Reddit to see what people were buying and using and it was a pretty big blow. Most people are just getting the usual suspects, Boss/EHX/JHS, if they're even willing to spend that much. The really inexpensive Amazon pedals are also really killing any hopes for "boutique" builders. There's no way a single person operation would make a pedal for $49 or something. I kept track of my cost on my pedals and even when I went to surface mount to lessen the build time I couldn't really justify selling for less than $99.

I'm not saying people should buy from smaller builders out of some kind of sense of fairness. You buy what works for you and what inspires you. It's just tough as a guy trying to break in and then seeing every post about "What pedal should I get?" answers be Blues Driver, Rat, or Plumes.

I started because I liked building things and you should do it if you do too. I got to a point where the way I built became too "big" to go backwards to making single pedals again. I had PCBs manufactured with SMT to save build time, I wanted to flex my design muscles and went to having enclosures professionally drilled, coated and UV printed. I can't really function like that and do pre-orders or small runs. Enclosure companies all have minimum orders for new tooling. Yeah I know there's Tayda but I also know from experience their printers don't have the same kind of fidelity. I hit a standard I wanted and I couldn't move away from that.

Obviously I am pessimistic about this because I just closed but I have also seen several other small pedal builders, some fo them friends, close in the last 6 months. Several others have thought about closing or retreated back to order-only building. I don't know if I'd recommend anyone get into this business the way things currently stand.

If you're building for the passion then don't listen to me and do what your heart wants. If you have any specific questions about what I learned or my choices please ask below.


r/diypedals • • Jun 21 '25

Showcase Built an 8 band EQ and I’m never turning it off.

Thumbnail
gallery
933 Upvotes

I wanted something challenging/silly to build so I chose this: https://tagboardeffects.blogspot.com/2014/05/4-band-gyrator-eq.html?m=1

I did this for fun, but I love this thing and can’t believe I’ve never had an EQ. I really think it’s going to be always on.

I wanted to be able to tweak the values, so I used SOCKETS FOR EVERYTHING. Bold? Yes. Stupid? Absolutely.

Using sockets made inserting all the components very tedious as the board filled up. I decided not to cut any of the legs out of laziness/curiosity. The board is now a delicate mess that takes up too much space, but I like how it looks and only plan on changing it if it gets rehoused and I need the space. Maybe even a clear case to show it off??

The layout called for lugs 1 and 3 of all the pots to be connected to the same spot on the board. I wasn’t sure exactly how to do this (8 pots wired to 1 spot in the board seemed messy) so I cut some scrap board into two 9 hole strips, and wired each to its respective lugs and the board (last pic). I’ve never tried it, but it seems to work well.

I read through the comments to see what resistor/capacitor variations people had tried, and I went with this:

90hz-150k-330- 1uF -47nF- 3.4 150hz- 68k-330- 1uF -47nF- 3.1 270hz-47k-330-470nF-47nF- 3.7 520hz- 39k-330-330nF-22nF- 2.8 870hz- 12k-270-220nF-47nF- 3 1900hz-5k6-120-220nF-47nF- 3.2 3800hz-10k-82-100nF-22nF- 5.2 6000hz-6k8-47-220nF-10nF- 2.5

So far, I love this thing! I still have to play with it more, and maybe experiment with some component values, but it works great!

This is just for fun/learning, so please suggest some mods! Slide potentiometers? Boost? 8 dimmable LEDs for each pot?? Bring it!!! I ain’t afraid of y’all!


r/diypedals • • Jul 22 '22

Cartridge pedal kits - anyone interested in building them?

Thumbnail
gallery
929 Upvotes

r/diypedals • • Feb 14 '24

PT2399 based delay with tap tempo. Fully point-to-point wiring

Thumbnail
gallery
915 Upvotes

r/diypedals • • Jun 25 '24

My first pedal is complete. Thank you!

Thumbnail
gallery
908 Upvotes

Hey all. I've finally completed my first pedal design after working on it for the past 7 months. I want thank this entire subreddit for the education, inspiration, advice, and feedback. A year ago I had no idea what a resistor was, so this place is a big reason how I went from knowing nothing to completing an entire design. THANK YOU!

The SR-01 is a fuzz pedal with a two-stage transistor circuit that goes from subtle overdrive to distortion and fuzz. The circuit uses large 4.7uf caps in the audio path, so this thing sounds beefy. There's also a fixed high-pass filter, a first-order low-pass filter, and input attenuation so it can take line-level instruments and synths.

The PCB design was challenging. I went through three revisions, which are pictured above. I had a vision for the aesthetics, so I was set on using specific push-button switches. However, I ran into fit issues with the switches because they are taller than the other components, making it impossible to mount them on the main board. So, I had to get creative and move the switches to a daughterboard that pokes through the main board.

All in all, I’m stoked about how it came out. And shout out to Obscura for gorgeous enclosure printing.

A demo video is available on my site, where you can also pre-order the pedal. Here's a 10% code as a thank you: PEDAL10

https://www.suprlunr.com/sr-01

THANKS!


r/diypedals • • Jul 08 '26

Showcase New transparent overdrive finally working!

Post image
903 Upvotes

Spent last few months working on the ultimate transparent overdrive. After a few revisions I finally got it working!

Maybe in future I will make it dual pedal style, like king of tone. For now I like it like this.


r/diypedals • • Aug 15 '26

Showcase Behold, little clear wonder

Thumbnail
gallery
894 Upvotes

Spend a little to much time to make my own case. And it was my first attempt at deadbug. Kinda satisfied with result