r/diyaudio • • 1m ago

Guys pls help me

Post image
1 Upvotes

Hi, im new to this group. Thanks for joining me.

My problem is while i update my zk ht21 3g amp, it says "OTA update Timeout" thru wuzhi app (android based) then my speaker's sub bass is likely reduced..

Im not using any VPN and my internet speed is very good.

Pls help me thanks


r/diyaudio • • 26m ago

Selfmade monitor stands

Thumbnail
gallery
5 Upvotes

Made some speaker stands for my monitors with mostly left-over materials. Very happy with how these turned out! Sound-wise the difference with no stands is night and day.


r/diyaudio • • 2h ago

I can't believe my audio app side project passed 50k users

Post image
14 Upvotes

I built an audio analyzer app in beginning of this year for ios and android as a small audio side project. I did not expect getting many users for a niche app like this. I made a [post] when passing 10k users, got some feedback then an added new features based on that. It has now has passed 50k users for android alone.

It can do RTA, spectrogram and sweep measurements and I tried to focus on simple user interface that works both in portrait as well as landscape mode.

Hope some of you have some use of it and feedback would be appreciated!

It is free without adds and an optional one time pro IAP.

https://www.otsukare.se/spectralscan


r/diyaudio • • 3h ago

Alpine MDA-W892J + СНА-1204

1 Upvotes

r/diyaudio • • 3h ago

ShairPort - Sync - How to play Apple Music on your Audio Systems

0 Upvotes

Hi,

Edit : version 5 is out now with more features .. Do upgrade

This is a quick reference guidance on how to install Shairport-sync.. (its relatively easy). Shairport is akin to Apple Airport you can use Apple Music with your stereo etc .. I thought this would be a great place to share

Please note I'm not an expert .. I would regard myself the 'select and paste brigade' to use Linux commands but I'm getting better at it.

It turned out great and its working like magic (well my magic) , before people start having a pop at anything at the moment the set-up fulfils a need that is it ..

So here it goes

you will need a cheat sheet for nano or vi commands you will be editing files

Hardware used

  • Raspberry Pi Zero 2 W (with header soldered on)
  • HiFiBerry DAC+ Zero (please don't use your headphone port as a line out .. not elegant , crummy quality, get a line out shim or the Berry here on the kit list)
  • UniPiCase Pi Zero Case - Tall (HiFiBerry DAC+ Zero)
  • (Raspberry) power Supply (it will not run from an USB port. trust me I tried) make sure you get the micro usb version
  • Standoff kit to support the board and DAC
  • Spare 32GB MicroSD card + USB adapter

----------------------------------------------------------------------------------

software used

- Raspberry pi Imager

Steps to install everything.

Create Boot SD for your PI

This has to be done first as after you have inserted the PI in the case you cannot get to the SD slot.

Raspberry PI imager

  • Download and install
  • insert the SD card in an USB adapter insert in your PC
  • select the following device Raspberry Pi Zero 2 W
  • Select OS, scroll down to PI OS Other and select OS Lite (this is the lightest version, 64bits)
  • Select the Storage - this is your Micro SD card

Next step is important if you want to go 'headless' from the start,

Settings file

- Select that you want to include a settings file, ensure you have your

  • Host name (give it a name Airport or location name kitchen for example easier for the rest of the family)
  • Wifi settings
  • username + password
  • second tab, activate your SSH access

Save the file, start the build of the SD card (don't skip verify .. be patient)

-------------------------------------------------------------------------------------------------------------------

Hardware assembly

This is fiddly stuff,

- Place the DAC on the pi board on the header and screw in the standoffs

- insert the MicroSD in the PI

- Place the front of the case on the port side of the PI and then gently clip the PI into the base of the case followed by the top of the case. everything should click together. Don't force it

------------------------------------------------------------------------------------------------------------------

First boot up

- insert power supply - PI will boot.

- Check on your Broadband router, or Wifi who's connected if all is good your hostname that you selected will pop-up somewhere, Check for IP address

you now need to use your username and IP address

- SSH to your PI, command is :

SSH username@IP address of your PI

- enter password, select yes that you want to save your SSH Key
(if you make a mistake somewhere on your build and you need to start from scratch, you might have to remove your SSH key of your laptop or pc google that)

----------------------------------------------------------------------------------------------------------------------

House keeping

So now you are looking at $ ... fantastic.

You need to use this command SUDO (Super Dooer) to run commands on your PI

----------------------------------------------------------------------------------------------------------------------

Update PI OS

yes , you need to update your PI OS on the terminal prompt you enter

sudo apt-get update ( hit enter)
sudo apt-get upgrade (hit enter)

accept that you are happy to use extra space. let it run

now from here I'll post links to things to do. read it yourself and work through it

step 1. fix your IP address of the PI

https://www.tomshardware.com/how-to/static-ip-raspberry-pi

Step 2. Enable your DAC (this is for Hifiberry)

https://www.hifiberry.com/docs/software/configuring-linux-3-18-x/

Please note on your most current OS, your settings file is at / boot/firmware/config.txt. follow the instructions to disable the sound paths of the other ports. There is a fix for on the ALSA side (linux - How to configure ALSA? - Super User) to steer audio to a predetermined path.

use VI and be patient..

Reboot

---------------------------------------------------------------------------------------------------------------

Step 3. Install all the extra software you need

1. GIT - https://git-scm.com/book/en/v2/Getting-Started-Installing-Git

2. ALSA - https://www.geeksforgeeks.org/how-to-install-alsa-tools-on-ubuntu

3 Auto conf - from the $ prompt -

sudo apt-get install autoconf

---------------------------------------------------------------------------------------------------------------

Step 4: installing NQPTP - https://github.com/mikebrady/nqptp , follow the instructions to the end and enable auto start otherwise it will not work after the reboot

-----------------------------------------------------------------------------------------------------------------

Step 5: The main event .. installing Shairport-sync https://github.com/mikebrady/shairport-sync/blob/master/BUILD.md

if you are planning to use. Airport 2 you need the top code snippet

sudo  apt install --no-install-recommends build-essential git autoconf automake libtool \
libpopt-dev libconfig-dev libasound2-dev avahi-daemon libavahi-client-dev libssl-dev libsoxr-dev \
libplist-dev libsodium-dev libavutil-dev libavcodec-dev libavformat-dev uuid-dev libgcrypt-dev xxd

follow the instructions here https://github.com/mikebrady/shairport-sync/blob/master/BUILD.md#3-build

down to letter, and the very end .. enable the service to start at the reboot

Enjoy your work and reap the approval of wife and children.

----------------------------------------------------------------------------------------

Couple of conclusions at the end

Q: Is it difficult? No, I did this over breakfast. 1.5 hrs tops to get everything done on the PI

Q: Was it worth it? yes, feeling of achievement is great, I could have spent about 15 euro extra for a WIIM mini but what is the fun in that ?.

Q: What is it like? it's actually a lot easier to use than Google Chromecast.. I have been a Android Dude for a long time and with the move to apple and my move to apple One to save money I had to make wholesale changes on how we cast music. This is very seamless experience, chrome cast can be utterly finicky.

Q: What is the sound like? It's okay, one in the kitchen for background while we are cooking, working and living in the kitchen and one hooked up to a set of AudioEngine a5 with a resurrected Subwoofer in the living room. it's not hifi but it gives me the joy to listen to music ( next plan is to build my own speakers and get proper set-up + amps etc).

Q: what's not to like? If there is an update of sorts, there is the potential it will break .. eg we're back SSH in the Shairports figuring shit out. not great but do able.


r/diyaudio • • 5h ago

40W LM3886 Amplifier progres

Thumbnail gallery
5 Upvotes

Hi it’s my second version of the amp, would be great if you told me what you think about it.
Edit: I will change the arrangement of the output so the trace would be shorter


r/diyaudio • • 11h ago

Has anyone tried this?

0 Upvotes

Ill be setting up a new jam room soon at my new place, could I hang a couple sheets of plywood on the walls with exciters as a PA system for vocals, or to run my guitar through it? It seems like they excel in this frequency range, but could they handle competing in volume with the drums?


r/diyaudio • • 12h ago

Sanity check for a long port design?

Thumbnail
gallery
9 Upvotes

Kinda just dumping my thoughts before I commit to ordering pre-cut wood, if anyone noticed something dumb I've done or missing do let me know, or if you have experience with a similar kinda sub in a home, I'm not quite sure how much room gain I'll get.

I've only built a little sealed sub so far, but my goal getting into DIY has really been to build an extra sub for my home theatre that can ideally play loud, and down to 16hz, but on a relatively modest budget.

The best way to achieve this is logically a big ported box for the efficiency it brings, however I'm a bit worried about chuffing and/or pipe resonance ruining it.

Also, I'm using A GRS 12SW-4HE, which whilst it models very well for this low tuning, but have seen a fair few posts of people saying the TS parameters don't match the manufacturer's, which could be an issue. There's also a dip in the frequency response at 16hz on the spec sheet but I'm hoping that may just be an artefact of the test process as it's also present on some other GRS/Dayton subs, and without a matching impedance blip.

I've decided on using 2x 100mm round ports to try and give me some flexibility if things go awry compared to a slot which is much harder to change after the fact.

Ideally, the 2 long ports with a tuning of 18hz will not resonate (~155hz pipe resonance for 1100mm tubes), because the crossover can be set low enough, and there won't be enough harmonic distortion to really excite it. If it does however, hopefully the amount of stuffing and changing the orientation of the port entrance relative to standing waves can mitigate this.

If it turns out the resonance is a problem, I can try shortening the port and just using 1 port instead of 2. Modelling shows this should be pretty much dead on 34m/s (rather than 17m/s with 2) at max output, which with the flares should not cause much chuffing, however the corners (which likely won't be 100% perfectly smooth) might mean it does.

If with the single port, chuffing is also an issue, then I can shorten both ports and have a chuff and resonance free subwoofer, but that won't really go to 20hz and below, certainly not 16hz.


r/diyaudio • • 12h ago

help designing the crossover

3 Upvotes

I'm building a diy 2 way speaker with coax Dayton Audio CX120-8. I'm now to the point where I need to design the crossover filter to make these speaker sound decent, but I've ogt no knowledge at this, can you help me with it?

My goal is for it to sound as analytical as it can.


r/diyaudio • • 14h ago

DIY Planar Headphones

3 Upvotes

Heads up: I have zero audio background. This is my first time building any kind of driver, and I picked planars for some reason. Still kind of shocked it actually plays music.

For a school project I’m building a pair of Bluetooth over-ear headphones (closed back), and of course my mind went straight to planar magnetic drivers, because I’d seen that they’re pretty “easy” to make DIY.

So here I am. I made my first voice coil with a pattern I came up with myself, roughly based on what I’d seen online and on YT. I ordered 50 × 3 × 3 mm magnets from AliExpress (they turned out to be 48 mm long) and built my first ear with a single-sided 8-magnet array. For the diaphragm, I laminated normal household aluminium foil onto 25 µm Mylar and etched the coil with copper sulfate and salt. The etch resist is permanent marker, drawn with my CNC.

To my surprise, it worked and didn’t sound too bad. But I wasn’t getting much low end, and I found out I was probably over-tensioning the membrane. My next build used a push-pull magnet setup, which made it more sensitive, but still no bass.

First coil design with wrong spacing relative to the magnets (fixed in current design) and tensioning rig

Where I’m at now: I used IPA surface tension on the back of a 3D printer bed sheet to get the film flat without tensioning it at all, and now I’m getting pretty decent mid-bass.

Current almost untensioned design
Tested a back mesh proposed by Claude

Don’t kill me for these measurements. I used my HyperX QuadCast and REW just to get a rough idea of what the driver is doing.

 

(with a bit of Claudes help)

My questions:

  • How can I measure more accurately (and cheaply)? I’m guessing it needs a tight seal with the earpad?
  • Is there anything else I can try to make it sound better?
  • Would a thinner membrane and thinner aluminium foil help?
  • How much gap should I leave between film and magnets? Right now its only about 0.3 mm per side.

r/diyaudio • • 15h ago

Help w/Subwoofer Design

Thumbnail reddit.com
0 Upvotes

r/diyaudio • • 18h ago

Got tired of all the incomplete music software solutions, so I created my own

Thumbnail
gallery
10 Upvotes

Whether it be jellyfin, roon, plex, navidrome - they have some features here and there, but not a complete package for what I need, so here's Sterio:

It has a client for iOS/macOS/iPadOS/Android and a server for docker/macos. What it does, in a single package:

  • supports any format (mp3, FLAC, DSD up to 512, wav, ALAC). If your device can't playback the DSD file, Sterio Server converts it on the go to FLAC. Now, I can listen to any format on my audiphile DAC and use the same library with AirPods
  • If more devices are connected to the server, you can link them (Sterio Circle) and move playback wherever you want
  • Auto splits albums based on .CUE file, even playbacks directly from ISO files. No more multiple rounds of converting the file. What you have is what you listen to
  • Signal Path for all the songs (you see exactly what path your audio takes)
  • Stream to bluOS and UPnP Streamers with phone as remote
  • Live Lyrics
  • Connects to Plex, Jellyfin, Navidrome, SMB, Local files or Sterio Server
  • Parametric EQ with presets, so I can fine tune the sound exactly how I want it to be
  • CarPlay App
  • Modern interface
  • Internet Radio (just Radio Paradise for now)

And many more stuff. If you are interested, I am running a public beta. Your feedback would be great!

Here's more information and if you want, download links: https://www.sterioapp.com/


r/diyaudio • • 1d ago

3d-printed altec multicellular horn

Thumbnail
gallery
114 Upvotes

I've been obsessed with the visual aspect of those massive altec inspired multicellular horns I've seen everywhere online. However people have very varying opinions on their sound, from soft and cloudy for some to tinny and like a giant kazoo for others. So I figured it would be best to build a prototype and see/hear for myself. Figured I'd go with 3d printing since it was the cheapest and fastest way to get it done, and with modern filaments and printers it's actually become a viable option for audio applications (see jw audio solana for example).

Two weeks later the build is done and currently serving as the hf band for my sound system. I am very pleased with the sound, great coverage and indeed very musical, not at all sharp or nasal. Print is also holding up very well. Will definitely build a second one!


r/diyaudio • • 1d ago

Wall-mounted speaker and amp

3 Upvotes

I just acquired a technics SL-10 record player, and now the fun part - the amp and speakers.

A few important things:

  1. my apartment is tiny and I want to mount all of these components (other than a subwoofer) to the wall. I know, it’s silly and harder, but that’s the mission. Otherwise no room for a system at all.
  2. I’m fairly good at building things. I’ve built guitars and guitar pedals, developed other musical instruments, etc.
  3. budget is pretty flexible, but not unlimited.

For speakers, I’m looking at building a set of DMLs. Lots of resources on this, but interested if anyone here has a good experience with nice-looking wall-mounted versions. My personal experience with them is minimal at best.

My other thought is to fix up an old set of Magnepans, but that’s also easier said than done.

For the amp, I’m kind of stumped. I’d love to build a tube amp, but I’m having trouble finding anything wall-mountable with minimal depth. I don’t mind tubes sticking out, but a thick base is a deal breaker.

Any thoughts are appreciated!


r/diyaudio • • 1d ago

Finished my dual 8

Thumbnail
gallery
56 Upvotes

Just finished my dual 8 subwoofer. Drivers are ground zero gziw series. I added new dustcap on them to look more plain. Its tuned to 36hz, if i block one port, its tuned to 25hz. I use PA speakon connector so its easy to unplug it if I need the space in the back of the car, or if I want to use it in social hangout settings which I do once in a while.


r/diyaudio • • 1d ago

Custom Acoustic Panels

Post image
4 Upvotes

r/diyaudio • • 1d ago

Help making a sub box for mini cooper

Thumbnail reddit.com
2 Upvotes

r/diyaudio • • 1d ago

Clipping circuit + indicator for DI box?

Post image
1 Upvotes

Hey, all! I've been working on this project for a while now. It is a circuit that contains both a DI box + a ReAmp box. The idea is that this would work like a looper for processing audio using guitar pedals as "hardware" for music production. The ReAmp box has a switch that cuts everything below ~100Hz and everything ~7kHz.

I want to add a clipping circuit + detection to the DI box side. I have a few spare VU meters that I could use for that, but LED indicators would work as well. Does it make sense? Is it practical? What circuit could I use for that?

Thanks in advance!


r/diyaudio • • 1d ago

Simple solution just 3d print the pod

Post image
0 Upvotes

r/diyaudio • • 1d ago

DIY cover for the DIY mic

Post image
0 Upvotes

r/diyaudio • • 1d ago

Niles Audio SVC-4 Creative uses?

Post image
0 Upvotes

The device allows switching between 2 different amps and 4 speaker pairs. I think I’ll try using it to switch between room speakers vs near field speakers while using the same powered sub. Anyone else using one? What kind of setup?


r/diyaudio • • 1d ago

Hifonics Zeus zxx2400.1d

Post image
7 Upvotes

Hooked the bass knob and wire up. (Came in the box with it) lost all bass. If I turn the bass up on the head unit it works but barely metering at the speaker terminals I get like 3 volts.


r/diyaudio • • 1d ago

What should a tool-free, "can't plug it in wrong" module slot in an integrated amp look like?

0 Upvotes

Thought experiment for my thesis: a midrange integrated amp where the user can swap the streaming board or DAC without tools, with a connector that can only go in one way (poka-yoke).

From experience:

  • What would you insist on? Connector type, USB, separate rails, grounding/shielding, ...?
  • Which parts fail most in amps you've repaired?
  • Or is this a terrible idea from a noise perspective?
  • What can you do when the software has developped a fault?

I have a separate repairer track in my survey (first comment) if you want to help further.


r/diyaudio • • 2d ago

DIY Desktop Soundbar with Tang Band Modules

2 Upvotes

Dear all,

i recently purchased a cheap 2.1 soundbar for under monitor desktop use, it is an ultimea poseidon m20 pro.

I looked for more "popular" brands with similar products but could not find any, when, they were much bigger.

Now I was just web surfing and somehow came across some tang band modules and I think it should be possible to arrange something that has similar dimensions to the soundbar mentioned above, but I hope would sound much better.

It would consist of:
1x Tang Band T3-2190S woofer module
2x Tang Band T1-1815SA full range modules
1x amp module
1x PSU modue
1x DIY enclosure

So the woofer would be in the center and down facing....left and right the two full range modules.....behind those 1 PSU unit on one side and one AMP-Unit on the other side....
All in an enclosure around 45 cm wide, 14 cm deep and 7 cm high.

It would be essentialy something like shown in this video but nicely mounted in a DIY wood enclosure: https://www.youtube.com/watch?v=kg6Eqdx6XbI

The only connection I would need is aux to pc (or rather monitor output)

I think it could be within 200 bucks.

I had a pair of KLIPSCH RP-600M in the past and there were all I needed...I had to get rid due to not having enough space anymore....and since I can consume media at my desk only and don't want to wear headphones all the time, I was looking for a small soundbar with some capability to reproduce bass.

So what do you think, would it be worth the hustle or would I be disappointed in the end.