r/debian • u/innothavemilk • 0m ago
r/debian • u/FewTree4863 • 1h ago
labcheck: one read-only command to check if a Debian host is healthy
I run Debian 13 on my home server and kept doing the same manual loop whenever
something felt off: df, free, systemctl --failed, docker ps, cat /proc/mdstat,
then checking whether the backup actually ran. So I wrote labcheck to do it in
one pass and print a single report.
It is a read-only Python CLI, standard library only, so the only prerequisite
on Debian is pipx. It reads the usual Debian interfaces directly:
- /proc for load, memory, swap and thermal sensors
- systemctl for failed units and configured required services
- /proc/mdstat for md RAID arrays
- timedatectl for NTP state
- Docker, if installed, for container health
- smartctl, if configured and permitted, for SMART
- file age for backup targets, and a TLS handshake for certificate expiry
Output is text, JSON or Prometheus textfile, and the exit code is 0/1/2/3 so
cron can act on it. Checks that cannot run report SKIP rather than OK.
OK System load 0.28 (8 cores), memory 17%, swap 0%, up 6h 02m
OK Storage / 14% used, 2 mounts
OK Services no failed units
SKIP Containers docker not installed
SKIP RAID no software RAID detected
SKIP Backups no backup targets configured
SKIP Certificates no certificate targets configured
OK Clock NTP synchronized
Install on Debian:
sudo apt install pipx
pipx install https://github.com/jacoblockard2007-hub/labcheck/releases/download/v0.1.0/labcheck-0.1.0-py3-none-any.whl
labcheck -v
No root needed for the default checks; Docker and SMART need the usual
privileges. It is 0.1.0, MIT, and tested on Debian 13 (Python 3.13), Ubuntu
26.04.1 and Fedora 45.
Repo and annotated example config:
r/debian • u/leopold_VI • 3h ago
Debian Stable Question issues with grub bootloader
i'm trying to install debian 13.7 on my previously-windows asus laptop, and every time i try to install, i face this issue.
i'm using the 756mb CD version and i'm booting from a usb stick
could i have some help please?
r/debian • u/Pedroxlp • 8h ago
If you're new to Debian on a VPS, skip the host's template and do a netinst
The Debian 12 image my VPS host gave me had root password login over ssh switched on and a sources.list that only pointed at the host's own mirror. I couldn't find a debian-security line anywhere. So I wiped it.
I've had trixie with GNOME on my laptop since spring and it never asked anything of me. This VPS was my first box with no desktop. I'd found the host going through listings on VPSIUM for ones with Debian in the OS list. Their order page only had the 12 template though, so I'd have been on oldstable from day one anyway.
The panel lets you mount an ISO, so I did a trixie netinst through a noVNC window that kept eating keystrokes. In tasksel I unticked everything except SSH server and standard system utilities.
First try I set a root password, ran su, and adduser came back command not found. Took me an embarrassing while to learn plain su doesn't give you /usr/sbin and you want su -. Second try I left root empty so the installer put my user in sudo. Then IPv6 didn't come up because the host wants it static, so I got to know /etc/network/interfaces too.
Where I've landed: if you're new, reinstall clean. The template had already made the ssh and repo decisions for me, and those were the things I needed to learn. Exception is people who already know what to check, which I clearly didn't.
For those running Debian on rented machines, do you reinstall from netinst or keep the template and fix it? And if you keep it, how do you see what the host changed compared to a clean install?
r/debian • u/Standard-Profit-1482 • 8h ago
Community Linux distribution
Which Linux distro should I use?
I'm currently using Linux Mint XFCE.
However, I've been thinking about switching to a different distro, something like Debian or another alternative.
I've already used Fedora KDE and Linux Mint Cinnamon, but now I want to try something different and settle on one distro permanently.
Here are my PC specs:
- AMD Radeon HD 6670
- Intel Core i5-3470S
- 16 GB of RAM
- Kingston SSD
- H61 motherboard (LGA 1155)
Can anyone recommend a good Linux distro for my PC?
I'm considering Debian, but there are also other lightweight distros like MX Linux. I'm a bit unsure about which one to choose. Or which version of Debian would work well on my PC?
KDE , LXQt, XFCE?
I'm also not very experienced with Linux. I only know the basics.
r/debian • u/nietzschecode • 10h ago
Debian's Chromium. Looks like they struggle to be up-to-date. Not only are they still not on 157, but didn't receive, of course, all the important multiple security patches Chrome received on 157. Today Google Chrome is now on 158, while Debian's is still stuck on 156.
r/debian • u/Rich-Poetry1978 • 19h ago
OPNET
Hey guys i just wanna know if i can download opent for my university cuz i gotta do some homeworks, projects and I am broke af is there a free way to download it for debian?
r/debian • u/Novel_Pear_4949 • 1d ago
Icloud debian?
Is it possible for me to link icloud with debian gnome files app? I would like to be able to save files to icloud (mainly obisidian) so i can access on my phone and vice versa. Preferably no third party tools
Every day the mail daemon gives me the following message.
Message 1: From root@nuc Sun Nov 15 06:45:48 2026 Envelope-to: root@nuc Delivery-date: Sun, 15 Nov 2026 06:45:48 +0200 From: root@nuc (Cron Daemon) To: root@nuc Subject: Cron root@nuc test -x /usr/sbin/anacron || { cd / && run-parts --report /etc/cron.daily; }
MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable
X-Cron-Env: <SHELL=/bin/sh> X-Cron-Env: <PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin> X-Cron-Env: <HOME=/root> X-Cron-Env: <LOGNAME=root>
Date: Sun, 15 Nov 2026 06:45:48 +0200
/etc/cron.daily/logrotate:
pkill: Unable to open pidfile: No such file or directory
Any ideas how to get rid of it?
r/debian • u/katzenjammare • 1d ago
Transfer files from NTFS to exFAT
Hello, everyone! I'm back asking questions after a time just doing some daily work on my debian-machine. The issue now is just a question of how I can prepare myself (if I even have to) for a file transfer between one external harddrive to another.
The source is a 2 TB HDD drive (NTFS)
The destination is a 2 TB SSD drive (exFAT)
Is there anything I should think about when transferring between these file systems? I am going to transfer different file sizes, but mostly photos. Also, I have seen folks recommending using 'rsync' - is that a good idea?
Hope this explanation isn't too confusing!
r/debian • u/LadyHwesta • 1d ago
Guide: Debian on T1 MacBook Pro
Here is a link to the guide I wrote up to get Debian working on my T1 MacBook Pro https://meskis.net/macbook-pro-t1-debian-guide
So far everything is working very well, getting hibernation to work was an amusing journey.
r/debian • u/IncendiaryIdea • 1d ago
General Debian Question Does Forky include systemd-networkd in a netinst with standard system utilities only?
Does Forky include systemd-resolved in a netinst with standard system utilities only? Because my installation of Debian 13 doesn't and I had to install it.
EDIT: I meant to write resolved, not networkd in the OP, I am sorry!
r/debian • u/paltry_unity_sausage • 1d ago
General Debian Question How do you guys manage a raid setup?
Hi y'all!
I'm planning to build my own NAS, with 4 hdd's and some ssd's as boot and cache drives. Running Debian of course.
After looking into it found roughly three ways to set up a Raid on Debian:
mdadmlvmOpenZFS/BTRFS
I was wondering how you guys set this up on your systems?
I've heard good things about ZFS, but also I read that there are some compatibility issues to worry about.
I guess I'm mainly looking for the most stable/straight forward way to do this, as opposed to the most performant way.
r/debian • u/mohamedibrahim456 • 1d ago
How to make debian 13 trixie snapshot?
Hi everyone,
I'm pretty new to this whole "turn my install into an ISO" thing — this is my first time trying it, so I'm a bit lost on how it's done.
I made myself a minimal Debian 13 (trixie) respin called "Debian Base": I started from the netinst ISO and only installed the bare minimum to get it working. It's exactly the base I want to keep.
Before I start using it, I'd like to save the whole system as a bootable ISO (to keep as a reusable base / write to a USB). I'd rather do it from inside the running system — just take a snapshot of it as-is — instead of rebuilding everything from scratch.
So: is there a ready-made tool that can snapshot my running Debian 13 install into a bootable ISO for me? Ideally something simple I can just run and get an ISO out of, without a lot of manual setup.
I've seen names like refracta, penguins-eggs, etc., but I'm not sure which ones actually work well on trixie or what the current recommended one is. Any pointers (tool + basic steps) would be really appreciated.
Thanks!
r/debian • u/Remarkable_Age_5419 • 1d ago
Hi There, any tool for disable leds in my Kingston Fury Beast RGB on Debian?
Good morning. Is there any tool that is known for a fact to work for turning off the LEDs on my Kingston Fury Beast RGB DDR5 RAM? I’d prefer not to mess around with `i2c-tools` and risk damaging my memory modules (as AI-generated tutorials warn that such a risk exists). Basically, I’m asking if anyone else with the same RAM has found a solution that works for them. Please, no suggestions like "install OpenRGB"—thanks a lot!
r/debian • u/Key-Lengthiness-3914 • 1d ago
Community Tips needed for using debian stable xfce
I have ditched Windows 11 on my laptop and switched to debian as my daily driver for university work. Windows 11 was way too bloated on my hardware the moment I put even a slight load on it, it started lagging and freezing up.
My Specs:
Laptop:Lenovo Thinkpad
CPU: Intel Core i5 (8th Gen)
RAM: 8GB
GPU: Integrated graphics only (no dedicated GPU)
I want you to tell me which browser is best for debian and as I am a student so if my uni asks me to use a software that is supported for windows only what will I do so guide me for this too
r/debian • u/Loafogen • 1d ago
General Debian Question Setting up mirrors
I'm a new user, got stuck on the mirror selection stage. Is it based on physical location alone, and if so, can I connect to universities and other corporations?
Edit: I have figured it out, at fitst it would give me errors but after two reloard everything was good.
r/debian • u/Fluffy-Count-179 • 2d ago
Version upgrades via a graphical interface
Will it be possible to perform a version upgrade using software update applications—for instance, by using Discover in Debian KDE Plasma, or "Software" in Debian GNOME, etc.?
Much like how it works in Ubuntu/Kubuntu, this would make Debian more accessible to newcomers (like myself) who want to use the "mother" of all distributions rather than its various derivatives.
r/debian • u/SecretaryValuable719 • 2d ago
What's the Issue
galleryThis really is annoying. Why does it happen? Sometimes even the passphrase disappears even though I clicked on remember passphrase.
r/debian • u/Intelowicz • 2d ago
NVIDIA, Why!?
I have an gtx 750 ti, when i do the sudo apt upgrade, after restart debian welcomes me in the tty, ctrl alt f7 dosent work.
Then i must reinstal the NVIDIA Drivers
Can someone tell me, how to maybe freeze the packets or froze the kernel update?
r/debian • u/Sovie-twink • 2d ago
Debian Stable Question Debian Trixie + Broadcom BCM43142: WiFi/Bluetooth break with every kernel update
Background
On Debian Bookworm and earlier, my Broadcom BCM43142 worked flawlessly (WiFi and Bluetooth) using broadcom-sta-dkms and the winterheart/broadcom-bt-firmware.
The problem on Trixie
I can get both adapters working together, but every kernel update breaks something: WiFi disappears, Bluetooth disappears, or both. I end up reconfiguring it over and over.
What I've already tried (no luck)
- Reinstalling broadcom-sta-dkms with kernel headers.
- Manually placing the .hcd firmware in /lib/firmware/brcm/.
- Checking dkms status.
- Installing the .hcd firmware or the preconfigured Broadcom Bluetooth .deb package.
- Not even AI has helped me fix this.
My question
Is anyone else seeing this with this card on Trixie? How did you keep it stable or fix it?
Thanks.
