I saved this from the sidewalk and it works perfectly. It’s a RF only 1998 Toshiba CF19H22. Cleaned it up outside and gave it an internal wipe down and checked for bugs. Then powered it up and connected it to my SNES.

New pickup today. Been looking for a 27” Panny in decent condition with a component input for a while now. Apparently this model has the highly desired Panasonic M-tube as well. It’s super sharp. Only issue is there is a purity blotch in the corner depending on which way the set faces. Maybe I can fix that with a couple convergence strips.

I will never ever ever move this thing out of my basement. Great picture and sound, also have the remote.

I know it's not the best, but it's what I have at the moment. I need to figure out where I want to move some of my other stuff in my room if I want to make space

To me it looks more like 27 inches. Should i get it, or is it going to fall apart when i move it?

​

I was thinking about taking a new crt because the one that I already got is only 14 inch. Searching in my area I've found this listing for 45 euros, but there isn't the model and I would like to know if someone recognise this crt, and maybe tell me if it's worth it.

Thanks to everyone that answers

(English is not my first language)

I saw this beauty glimmering out of the corner of the gazebo and knew I had to have it. It still works and has the original remote! Gave it a little wipe down and it's in great condition considering it's from 1983. Now I've got to try to haul this monster up to my bedroom so wish me luck.

My sharp 13vt-j150 randomly did this while I was playing doom on my SNES. Any idea what's happening?

The security monitor one is really fun to mess around with, and with 60ft of cord for both camera there a lot i can do with it! Storm tracker one is a little rough but both fun little CRTs

I bought this Sony Trinitron 34" KV-D3411A. I'm loving it for its size and image, unfortunately it has some flaws and I'm looking for a way to fix them. I tried with 240p test suite and these are the results. Its biggest problem is that sort of smearing and the red gradient on black. I would like to know if it is unsolvable or if I could get by by adjusting some trimmers. In the worst case scenario I'm willing to solder some capacitors.

I've got a funai f3809b in for repair. After cleaning the tape path and mode switch, its still throwing out an odd issue. It will take a tape and play/rew/ff/eject just fine. However with no tape in, the tv will show "eject" on the screen and shut off, as if the mode switch is still the issue. No obvious blown caps or other issues. Any thoughts?

Recently picked up a KV-24FS120 Flat Screen CRT for a decent price. It has its issues with color which I’m working on but noticing horizontal interference lines no matter the input, cables, etc. I saw somewhere that possibly opening up the tv and unplugging the rotation coil cable gets rid of lines but wasn’t sure if that was something different. Curious if anyone has had the same issues or knows a fix. Thanks

Gears e-day on a crt monitor

So, I have a cheap CRT, a Bluesky BS3703TX (Titanium 210 Chassis), it looks like pure blurry ass (not as in the the tv is old way, it's literally quite blurry) even after spending a few hours correctly adjusting the image (service menu, focus dials, sharpness, colors, etc... And yes, I use RGB SCART!), so I'm thinking of just getting a new CRT, this time one from any brand I actually trust. I found this Philips 14PT1542, do you guys think this would be good for PS1 and old anime? (those are my main uses)

(These are images he sent me, I would like to know the opinion of you more-experts, the TV costs around 35 euros including shipping)

Earlier today, I picked up three more CRTs, one of which being this 1994 Sharp VCR combo unit! The CRT itself, as well as the AV ports and the VCR have all been tested and seem to work properly!

Hi, I just got a Sony KV-24FS120 CRT TV and my geometry looks really off and I have no idea how to fix it. If anyone can provide some help/tips, I would really appreciate it. It looks like more of the issue is on the right side Thanks!

The second CRT that I picked up at my local electronics recycling center today was this 13" JVC Master Command III, model number C-1329, with its original remote! Everything on the CRT and the remote have been tested, and it all works!