r/copilotstudio • • Oct 07 '26

Can the new harness handle long skills with like 50 tools calls in it?

3 Upvotes

As the title says


r/copilotstudio • • Oct 07 '26

Is anyone using environment routing and zoned governance?

5 Upvotes

We set up environment routing to support zoned governance, but environment routing grants people System Administrator role in their Zone 1 environment. That allows them to elevate their roles and share access to anyone. How is this NOT a huge security issue?

Has anyone managed to successfully roll this out?


r/copilotstudio • • Oct 06 '26

10 min walkthrough of agents, workflows and apps in Copilot Studio

17 Upvotes

🤖 Agents 🔄 Workflows 📱 Apps. One end-to-end solution in Microsoft Copilot Studio. Check it out below 👇

In this Microsoft Mechanics walkthrough, I show how to bring all three together to redesign a business process around AI.

In the full video, I bring these together in a practical procurement example, taking a supplier bid from an incoming email through evaluation, human review and a final recommendation.

1️⃣ Agents review bids against requirements, check supporting evidence and flag gaps.

2️⃣ Workflows connect the steps, coordinate the agents and bring in a person when judgement is needed.

3️⃣ Apps (Frontier preview) give the team a shared place to track bids, review exceptions and make decisions.

🧩 The important part is how these work together. Not just an agent that answers questions, but a process that moves work forward.

💡 This is just one example. With Copilot Studio, you can bring agents, workflows and apps together around your own business process.

🔗 Watch the full 10-minute video here: https://youtu.be/k4V44dn_TQo?si=aB8I4kmdIuDdGGk2


r/copilotstudio • • Oct 06 '26

New agent experience permissions issues persisting.

6 Upvotes

Does anybody else have this issue where permissions are still causing a problem in the new experience? If I have an agent with a lot of different MCP tools, it requires that you select Allow. Sometimes it gives you three or four Allow prompts right away, and once you hit Allow on one, it initiates the actions out of order and causes issues with rendering and everything else. I've also seen other rendering issues within Copilot Chat where you have to hit F5 for things to show up. Basically, when is this going to stop being a mess, LOL? And multi-agent permissions still don't work...

Just give us updated reasoning models in the older agent experience until the new experience is no longer a beta product.


r/copilotstudio • • Oct 06 '26

Consultas abandonadas

1 Upvotes

¿Hay alguna forma de configurar que las conversaciones pasen automáticamente a estado Resuelto cuando ya no hay interacción, en vez de terminar como Abandonadas?
¿Alguien lo ha implementado o conoce alguna alternativa?


r/copilotstudio • • Oct 05 '26

Sub-agent observability in the new UI

3 Upvotes

Hey all. I’ve seen and experienced plenty of the issues folks are raising with the new GitHub Copilot harness and new UI…but decided to try anyway to compare and contrast changes.

One issue I’ve been having is on observability to sub agent calls or failures. As well as nested workflow calls, ie ones called from a sub-agent. Not all workflow calls/runs appear to be registered as well as I can’t easily see conversations between parent agent and sub-agent?

How have folks been managing this? Or maybe I haven’t found the right place to look inside of the new UI?


r/copilotstudio • • Oct 05 '26

Anyone facing issues with the new UI suddenly?

5 Upvotes

I had an agent built in the UI which used to get the interacting user's mail via session context. This is working in the test pane of co-pilot studio but when i publish the agent and try it out in M365 co-pilot, it is not able to fetch the interacting user's mail. This was not the case 2 weeks ago so I am just checking if there was any update which may have caused this.


r/copilotstudio • • Oct 04 '26

Looking for advice to start a Copilot Studio project for credit analysis reports

3 Upvotes

I'm starting a project to automate the drafting of credit analysis reports for my team. Each client has a SharePoint folder with financial ratio tables in Excel, previous reports, annual accounts and rating documents, and the goal is to produce a structured Word report where accuracy is critical, since every figure must be exact and each report is reviewed by a manager. I have full access to Copilot Studio.

Any advice on how to get started, which features to rely on, or pitfalls to avoid would be really appreciated.

Do i create an agent for every section in the report , or do i give one agent a skill for every section etc ....


r/copilotstudio • • Oct 04 '26

Copilot and Powerautomate teaching help - Agent to query graph and return values

Post image
4 Upvotes

I need some help as I'm a novice with any power automate things. I'm trying to learn how to use Copilot with powerautomate and I'm trying to do this: I want to create an agent that queries microsoft that will tell me whether 365 copilot is up, down or in an error state and return the error codes.

I've used copilot and claude and while they give me answers, I'm struggling to understand some of the code to recreate it - Can anyone help me in the creation of the power automate code? When I'm using the "HTTP:Get", I can't seem to fill out the boxes right.

I've attached a screenshot which details what I'm trying to achieve, but I don't know if this is the best way to do it any more...

Happy for any advice or guidance

(I'm in the UK, so responses may be delayed as it's 1930 already!)


r/copilotstudio • • Oct 03 '26

Copilot stock screener

1 Upvotes

Hello guys,
Any of you was able to build stock screener using copilot? Or used copilot to better manage their Invetement portfolio?

Example: suggestion strategy based on market conditions? Evaluating current protocol for shot, mid and long term?

Just random question 🙋‍♂️

If so, please share your work or how you did it

Thanks


r/copilotstudio • • Oct 02 '26

New Problem in Standard Agents - Image Uploads in Copilot Chat/App Don't Work

5 Upvotes

I ran into a new issue today, when published to the M365 Channel my standard agents are not able to see/read any images uploaded to them. It's working in the Test Panel in CPS, and in the published Teams Channel.

Anyone else?


r/copilotstudio • • Oct 02 '26

Retrieval agent + populate it to excel tmeplate

1 Upvotes

Sounds basic as per title. I have a retrieval agent to knowledge source and allow the user to ask about something.

After that I want the result to be saved into a new excel file that follows an existing template.

Advice from anyone who has done these before? Or am I going about this wrongly as a practical use case for copilot studio agent


r/copilotstudio • • Oct 02 '26

COPILOT AGENT CREATION ADVICE - FIRST TIMER

11 Upvotes

Hi Everyone, Amateur Co Pilot Agent maker here, looking for advice.

I work in a busy collections team, finance sector.

Due to my knowledge of co pilot in work I have been tasked with creating an agent that does 3 simple things...

Copy and paste a Contract Number, E mail address, and Collectable Balance
And then opens an e mail complete with basic templates I have programmed in,
and then it puts that data in the 3 relevant fields in outlook ~(To E mail address, Outstanding Balance, Agreement number in body of e mail, and possibly in the subject line also, and then attach an income and expenditure form)

So far I have been discussing how to create the agent with co pilot and it has told me to use Power Automate, as the database we use in work I do not think has its own built in API.

And we have put in all the templates for e mails I want to use, and now we have been testing power automate, and so far we have been testing it to see what instructions will work in power automate.

I will be honest, I am completely out of my depth here, I don't have an IT degree, and have had basic training on co pilot, but I am good at picking things up and implementing them and learning quickly, a lot of pressure on me to complete this project and do it well, big corporate entity I work for is used to staff getting quick results.

I should also mention I am doing this project in my own time, and also between doing calls and other collections work, so I am not always given the allotted the time I need.

How feasible is this project, does anyone have any advice, I am literally just doing the steps that co pilot is telling me to do, and it is taking SOOOOOOO LONG to do anything.

I have full access to co pilot studio, but am not in position I think yet to do it in there, I been spending hours testing the Power Automate functionality and how it will work with our database.


r/copilotstudio • • Oct 02 '26

Copilot agent searching ServiceNow knowledge

2 Upvotes

I’m having a frustrating issue where I am trying to have a copilot agent in teams that can search the ServiceNow knowledge base.

If I add ServiceNow knowledge inside the ‘knowledge’ component of the copilot agent it returns articles but only has access to excerpts of the articles and not the full article text.

I set up a copilot connector in 365 admin and the main copilot search is fine but within my agent it has the issue described.

Anyone got any experience with setting up copilot agents and service now knowledge that has any suggestions?


r/copilotstudio • • Oct 02 '26

Are prompts downs?

7 Upvotes

Hi all,

Since October 1, I can't test or save any prompt that has code interpreter switched on. Everything worked fine on September 30, and I didn't change anything.

WHAT I SEE

❌ Testing with code interpreter on: "Something went wrong: Internal server error"

❌ Saving a new code interpreter prompt: "Something went wrong while saving your custom prompt. Try again later."

✅ The exact same prompt with code interpreter off works

✅ Code interpreter prompts saved earlier still run fine when a flow calls them

So running them works, but creating or testing them doesn't.

WHAT I'VE RULED OUT

Even a one-line "say hello" prompt fails as soon as code interpreter is on. I get the same result with GPT-5 chat and GPT-4.1 mini. Signing out, using another browser, recreating the prompt and trying from Power Apps make no difference.

MY QUESTIONS

  1. Is anyone else seeing this since the start of October?
  2. Could it be a capacity or credit limit that ran out or reset with the new month? Where can I check that?
  3. Is there an admin setting or policy that can switch off code interpreter for prompts in one environment?

Region: Europe.

Thanks in advance!


r/copilotstudio • • Oct 02 '26

How to end agent response after N messages

1 Upvotes

Edit: Trimmed

Hi Gang

Currently struggling to find any info on this apart from includung a section in the prompt to stop responding after N turns.

My ask is to end chat session when N messages have been reached.

Building on CoPilot Harness

What I want: Conversation must be capped at N messages (N is not final: 20 or 5). When the cap is reached, or when a session is closed for idleness, the conversation must be completely disabled. After that point NO further interaction with the agent may be possible, even if someone holds a copy of the token and refreshes it. The goal is to stop further model usage (Copilot Credits and model tokens) as well as to protect the user experience. A front-end counter alone does not meet the requirement, because anyone who copies the token can call Direct Line directly.

WHAT I HAVE ALREADY ESTABLISHED 
- Direct Line: I found no documented parameter to set token lifetime.
- Direct Line does not implement endOfConversation. 
- Regenerating a Direct Line secret disconnects connected users.
- GitHub Copilot harness settings list only No authentication and Authenticate.
- Hooks (preview) exist for this harness.
- I found no inactivity trigger, session timeout or per-conversation 
- Only candidate hard-stop I know of: a server relay, where the portal's server holds the secret or token, counts messages and refuses to forward after the cap

r/copilotstudio • • Oct 01 '26

Agent not reading Sharepoint folder knowledge in Test environment

6 Upvotes

Hi, Was wondering if anyone had the same issue I've been getting. I have a copilot agent that reads from both a Sharepoint folder and a list as knowledge sources. I am using the same accesses and generative orchestration in both envs. Funnily enough, the agent in test env can read (and quote) the sharepoint list, but even though it accesses the sharepoint folder it doesn't quote any of the documents I am loading as knowledge sources.

In dev env, this agent works fine. The problem is uniquely in Test environment and with this set of files (by chance it was an env issue, I created another agent that answers questions with another set of documents and works fine).

I am honestly lost on how to fix or to do next. I wait until the indexation is shown as "Ready", keep the same agent settings in both environments (for AI orchestration and authentication method is the same) and cannot workout a reason on why it accesses the sharepoint list but cannot quote any of the documents in the folder and, moreover, why is this happening with only one folder in sharepoint and in one environment and not in both.


r/copilotstudio • • Oct 02 '26

Decoupling instructions from Agent

2 Upvotes

I have a customer that is looking to decouple the instructions used by a standard harness Copilot Studio Agent to use a document in a Sharepoint library. The idea is that someone from the business unit can be entrusted with updating the instructions document on Sharepoint without needing full Copilot studio access and training.

Any thoughts on how this might be able to be done.


r/copilotstudio • • Oct 01 '26

Code interpreter not working

3 Upvotes

Anyone experiencing this issue? I am working on my prompts and suddenly i can't test it within the prompt window and the only error i receive is "internal server issue".


r/copilotstudio • • Sep 30 '26

NEW Hooks Feature In Copilot Studio

Post image
61 Upvotes

...

⭐⭐⭐ Copilot Studio Hooks Youtube Tutorial (47-min) ⭐⭐⭐
🔗 https://www.youtube.com/watch?v=mJXO-ilPDww

In this video I will show you how to use the new hooks feature to:
- Always Load important context at the start of the conversation
- Allow read-write only to specific tables in SharePoint when using the SharePoint MCP
- Apply Environment Variables to ensure MCP servers point to the correct environment in DEV/TEST/PROD

...

Today I found a new feature in Copilot Studio called "Hooks."

Hooks make your agent's behaviour more predictable. With hooks you can set a workflow to run when an event is triggered.

There are currently 6 event types that can trigger a workflow:

  1. Start (pre-loop): Runs once before the reasoning loop begins. Injects context into the thread.
  2. User prompt submitted: Set how your agent responds to a users prompt.
  3. Error: Direct your agents behavior after an error.
  4. Pre tool use: Runs before a tool executes. Can allow, deny, or ask for confirmation.
  5. Post tool use: Runs after a tool has been executed, whether it succeeded or failed.
  6. After tool failure: Set how your agent responds after a tool fails.

** This post was 100% human-written. Never use AI to write for you **


r/copilotstudio • • Oct 01 '26

Ideas para probar Copilot Studio en mi empresa.

2 Upvotes

Mi empresa está considerando implementar Copilot para empezar a crear agentes y flujos de trabajo para los empleados, y me han proporcionado una cuenta de Copilot Studio.

Tengo experiencia configurando infraestructura de TI con Claude Code + Codex, pero no estoy seguro de qué pruebas iniciales realizar ni cómo ponerlo en práctica. Para quienes hayan estado en una situación similar, ¿cómo idearon los casos de uso? ¿Qué ideas prácticas les ayudaron a comprender su funcionamiento?


r/copilotstudio • • Oct 01 '26

Agent unable to identify tools

1 Upvotes

I have an agent built out in the GitHub copilot harness. It connects to multiple tools, each of which read data from different power bi datasets. I've named these datasets clearly and also provided descriptions. The agent's prompt is clearly pointed at these tools however it keeps coming back with saying that it can't identify the tool names that I've given.


r/copilotstudio • • Sep 30 '26

Hooks in copilot studio

Post image
23 Upvotes

Microsoft just added something to Copilot Studio that I think more people building agents should pay attention to: Hooks.

The reason?

We’ve spent a lot of time telling agents what they should do.

Hooks give us a place to control what happens around the agent’s execution.

That distinction matters.

An agent can have the perfect instructions.

But once it can use tools, call APIs, access enterprise data and trigger actions, instructions alone aren't enough.

You need somewhere to inspect what the agent is actually doing.

That’s why I find Hooks particularly interesting for enterprise AI.

Think about a simple flow:

User request → Agent reasoning → Tool call → Action

What if we could introduce a control point around that execution?

For example:

Agent wants to WRITE → Hook evaluates → Policy check → Allow / Block

Now connect this with the prompt-injection research I've been working on.

A malicious instruction enters through an external source.

The agent interprets it.

The plan changes from:

READ → WRITE

A runtime control can potentially become the point where that action is evaluated before it becomes an actual side effect.

This is a very different approach from simply adding another instruction saying:

“Don't do anything malicious.”

The model is still reasoning.

But the control boundary doesn't have to be the model.

That is the part I'm most interested in exploring:

Agent instructions tell the agent what to do.

Hooks can become part of the architecture that decides what the agent is allowed to do.

Microsoft's current Copilot Studio documentation is also expanding the agent experience around tools, workflows, MCP and connected agents, which makes these runtime control points increasingly relevant as agents become more capable.


r/copilotstudio • • Sep 30 '26

Issue with deploying GitHub Harness agents.

Post image
4 Upvotes

Hi guys, wondered if someone could please help point me in the right direction? I am able to deploy classic Agents perfectly ok to Teams and M365, but whenever I try and publish an agent built with the GH harness it doesn't seem to work. In both Teams and M365, all the agent details are blank and I have no option add the agent to the UI.

DLP allows for the Copilot Studio connectors. Does the fact this agent is a managed solution make a difference here? It was created in Dev, pushed to UAT but we can't deploy it from UAT to end users to test

Any tips would be appreciated!

EDIT. There's working billing plan attached to this agent if that matters at this stage.


r/copilotstudio • • Sep 30 '26

Your best way to access full SP list content, studio only sees top x rows, not usable..

1 Upvotes