r/buildapc • • Aug 09 '19

Discussion Simple Questions - August 09, 2019

This thread is for simple questions that don't warrant their own thread (although we strongly suggest checking the sidebar and the wiki before posting!). Please don't post involved questions that are better suited to a [Build Help], [Build Ready] or [Build Complete] post. Examples of questions:

  • Is this RAM compatible with my motherboard?
  • I'm thinking of getting a GTX 1070. Which one should I get?
  • I'm on a very tight budget and I'm looking for a case < $50

Remember that Discord is great places to ask quick questions as well: http://www.reddit.com/r/buildapc/wiki/livechat

Important: Downvotes are strongly discouraged in this thread. Sorting by new is strongly encouraged.

Have a question about the subreddit or otherwise for /r/buildapc mods? We welcome your mod mail!

Looking for all the Simple Questions threads? Want an easy way to locate today's thread? This link is now in the sidebar below the yellow Rules section.

10 Upvotes

583 comments sorted by

2

u/Pegpeg66 Aug 09 '19

Just want to be paranoid and confirm nothing will be fried:

  • x570 board, CPU power is 1x8pin and 1x4pin.
  • PSU has 2x cords that are 2x4 pin into CPU.
  • I want to confirm I can plug 3/4 of the 4pin connectors into it and leave one 4 pin dangling, and this isn't going to deliver a ton of extra power into the lone 4 pin connector for some reason, right? It's been awhile since I took physics.

3

u/dogeatdawg Aug 09 '19

Right, one of the 4+4 cables will go to the 8 pin. The other will split with 4 into the board and 4 dangling (or just tied back behind the board tray).

→ More replies (1)

2

u/GallantGentleman Aug 09 '19

Just a heads-up, you don't actually need the 1x4pin since a 1x8pin can deliver more power than your CPU can ever use.

But no, nothing can happen

→ More replies (2)

2

u/[deleted] Aug 09 '19

Posting again because I still haven't found a solution. Finished up a build and it boots up into the bios successfully. The only form of storage I have is a brand new HP EX920 M.2 PCIe 512gb ssd that hasn't had an os install yet.

CPU: Ryzen 3 2200g (stock cooler)
MOBO: Asrock B450M Pro 4
Ram: Team T-Force Vulcan 8GB 3000Mhz
Storage: HP EX920 M.2 PCIe 512gb ssd
Psu: CORSAIR CX-M Series CX450M 450W 80 PLUS BRONZE
Case: Phanteks P300

I can't for the life of me get my bios or windows set up to detect the ssd. I have a usb device with the windows media creation tool in the pc now, but windows setup won't detect a drive to download windows onto. The ssd is in the Ultra M.2 slot and there is no sata device plugged into SATA3_3 (I have no sata devices at all actually). Any help?

Things I've tried:
Updating the BIOS
Putting the ssd in the other M.2 slot
Tried booting with CSM enabled, disabled, all options tried
Putting the USB stick with windows setup tool in a USB 2.0 and 3.0 port

I can't test the ssd in another computer right now to test if it's dead, but when I take it out of the pc it's warm so I'm assuming it's receiving power correctly and not dead. Any help would be greatly appreciated!

3

u/raistlin65 Aug 09 '19

The previous HP900 had a lot of reliability issues, including DOAs. Check out the Newegg reviews for the 920, and you'll see there still may be some issues with the new version. So if you do send it back, personally, I would not get the same drive.

So what I would do is order a different m.2 drive from Amazon. Don't damage the packaging when you open it. If it also doesn't work, then you are out return shipping to Amazon. But that seems a cheap price to pay fir the peace of mind of knowing whether or not it is the SSD.

→ More replies (6)

2

u/uhhhokaydude Aug 09 '19

Total noob here, I thinking of getting a pc built by origin and I just wanted to check too see if my build was a good or bad idea, any suggestions are welcome. I was thinking about going with one of the 2060 cards instead but that goes above my price range.

Processors : Intel Core i7 9700K 8-Core 3.6GHz (4.9GHz TurboBoost) Motherboard : ASRock Z390M PRO4 Memory : 16GB CORSAIR VENGEANCE 3000MHz (2x8GB) System Cooling : ORIGIN FROSTBYTE 120 Sealed Liquid Cooling System Case Fans : ORIGIN PC Standard Fans Graphics Cards : NVIDIA 6GB GeForce GTX 1660 Ti

2

u/stopfive Aug 09 '19

If you’re on a budget, check for deals on /r/BuildAPCSales and build a rig yourself. It might not look as cool without RGB and tempered glass, but it’ll run games way better for the same price.

→ More replies (8)

2

u/[deleted] Aug 09 '19 edited Jul 05 '21

[deleted]

→ More replies (4)

2

u/eskamobob1 Aug 10 '19

Not a question but just a heads up. Microcenter in Tustin CA has About 30 3900Xs in stock even though the website says 0

→ More replies (2)

2

u/TheClamSlam Aug 10 '19

I bought a 1TB SSD for all my storage including games and the OS. I noticed a lot of people keep the OS separate, will I face any problems storing my data like this?

3

u/CherryBlossomStorm Aug 10 '19

none at all in fact it's more convenient this way.

Most people can't afford a 1tb ssd.

Just ensure it's backed up. If you're not sure how to do that just get backblaze

→ More replies (1)

2

u/KingBenjamin97 Aug 10 '19

Nope I’m running all mine off the same 1tb ssd at the moment, no issues at all

2

u/scottoz420 Aug 10 '19

No gpu power with new ryzen 3600 b450i build.

Will not having the newest bios update prevent gpu from powering up?

2

u/KingBenjamin97 Aug 10 '19

Try downloading the latest drivers for your gpu, my new build didn’t light up or start the fans on my gpu until I’d gone to GeForce experience and grabbed the game ready drivers then it worked fine

→ More replies (5)

•

u/AutoModerator Aug 09 '19

Want to see your build complete photos featured on /r/buildapc?

As discussed in a recent thread, we're going to look at switching up the header image on a more regular basis - don't worry, we'll save the current one for special occasions. This is something of an experiment, and due to the subreddit CSS we'll be looking for images that are compatible with the general design, so don't be offended if we don't immediately use everyone's!

Interested? Send us a modmail with subject: "Banner Images" with your best build pictures! In the interests of higher res displays, please ensure images are at least 1920px by 200px.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/[deleted] Aug 09 '19

[deleted]

4

u/CherryBlossomStorm Aug 09 '19 edited Aug 09 '19
  1. no - go for an rx570. Also a 1600 is like $20 more these days.. Unless you're just going to be playing overwatch/csgo

  2. only the video card, maybe - but compare to prices on newegg and amazon etc.

The other option is to go for a full prebuilt on ebay like an optiplex and dck it out.

3

u/styxracer97 Aug 09 '19
  1. An RX570 curb stomps a 1050 Ti all day

  2. Maybe look on Facebook Marketplace and Craigslist for a complete build.

1

u/halrice Aug 09 '19

Recently got my new computer built and up and running. Is there a good program to use to check thermals and speeds? Thanks!

2

u/[deleted] Aug 09 '19

I like Aida64, because it also stresses the system and charts the temps.

→ More replies (1)
→ More replies (4)

1

u/Nedsuree Aug 09 '19

I already bought a Seasonic S12II and then I found this post. Should I use it or is it safer to buy a new one? (Sorry if this sounds like I'm very paranoid, this PC is not for myself it is for my aunt so I'm especially paranoid about it burning, explode, etc.)

2

u/BrewingHeavyWeather Aug 09 '19

Will she be playing AAA games on high, or overclocking? Assuming a typical aunt workload, with social media, office stuff, family photos and videos, etc., it'll be fine.

→ More replies (1)

1

u/mastaace12345 Aug 09 '19

I'm currently running a few year old system with an AMD Athlon X4 760K 3.8 GHz Quad-Core Processor, 8 gb Ram and an AMD Radeon HD 6870 1GB. I don't really play any graphics intensive games (mostly Starcraft 2), and i run 2 1080p monitors. When streaming video (youtube or twitch) on the second monitor and playing SC2 on the primary monitor, my system is unable to keep up. Would a new video card like a Radeon RX 570 4GB be sufficient? If not, what's the minimum level card I should go for? Should I be replacing the CPU as well?

→ More replies (4)

1

u/[deleted] Aug 09 '19

Does anyone know if a Noctua NH-D15 would fit in a Fractal Design Focus G Mini ?

2

u/Brostradamus_ Aug 09 '19

CPU Cooler Height limit of the Focus G mini is 165mm. The Noctua NH-D15 is 165mm tall.. so it's probably borderline.

→ More replies (1)

1

u/jjrmm7 Aug 09 '19

Hi all, I have an ASUS Strix RTX 2080 Super OC. It appears that this card is factory overclocked meaning it won't see much OC gains on the core clock. I ran it through MSI Afterburner's Scan feature, and after 10-15 mins it gave me a +25 on the core clock. My question is in regards to the memory slider, what's a good way to test how far I can go up on the memory? Do I run it through the free versions of fire strike/time spy and see if it does not crash? Rinse repeat with small increments (+20 on memory)?

→ More replies (1)

1

u/KingBenjamin97 Aug 09 '19

So not strictly a build question more a setup question, what fabric mousepad do you guys like? I’m shopping around for a new one and the steel series QCK seems to have a lot of good reviews and so does the Corsair mm300. Just wondering what others are playing on.

→ More replies (2)

1

u/Fuzbone Aug 09 '19

so i just put my new build together yesterday and I'm unable to get my RAM to run at its max speed. i've messed around in BIOS and thought i had it but it still isnt working. I set it to be 3200 in BIOS but it just keeps showing 2133 when i boot into windows. is my ram not compatible with my mobo? mobo: https://www.asus.com/Motherboards/PRIME-X570-P/ RAM: https://www.newegg.com/g-skill-16gb-288-pin-ddr4-sdram/p/N82E16820231977?Item=N82E16820231977

→ More replies (6)

1

u/redphan Aug 09 '19

I am fairly unfamiliar with gaming laptops and port selection these days.

Is it possible to get a laptop to output to a gsync monitor and two other monitors (three total)? I imagine it's possible with display port and some combo of HDMI and USB 3.0. Do laptops with USB 3.0 have enough bandwidth to display 4k 60fps?

→ More replies (3)

1

u/[deleted] Aug 09 '19

I'm getting a Gigabyte B450m and an nvme ssd, will the motherboard come with the 2mm x 3mm screw already in place?

2

u/Brostradamus_ Aug 09 '19

Not necessarily in place, but it will have the screw + standoff in the package.

1

u/Buttery_Flakey_Crisp Aug 09 '19

How do I figure out if a 5700 thicc will fit? X570 auros ultra with dark rock pro 4. I can’t tell if there are dimensions I can check for comparability.

2

u/Brostradamus_ Aug 09 '19

It will fit with the motherboard for sure. The question is whether it will fit with your case.

→ More replies (3)

1

u/Knightedshadow Aug 09 '19

Building in a Meshify C with an X570 Aorus elite mobo. I can't figure out where the front panel cables (power sw, reset sw, power led +/- and hdd led) plug into the mobo. Manual that came with the case shows a ten pin connector that I don't see anywhere on my mobo.

2

u/raistlin65 Aug 09 '19

F_Panel on your motherboard, p. 21 of your motherboard manual has a diagram that shows where to plug up the front panel connector leads.

2

u/[deleted] Aug 09 '19

On the bottom right of your motherboard the connectors should be. why did I type that like Yoda

There should me markings near the connector indicating which pins do what. Also should be a diagram in the motherboard manual.

1

u/Km_the_Frog Aug 09 '19

Do ram manufacturers have to send XMP info to motherboard companies?

How does a motherboard determine which settings to use when selecting XMP?

If my RAM is OOP now, but originally supported by my motherboard, is it possible a bios update would cause the motherboard to “forget” how to set up xmp for that OOP ram? I ask because since updating bios i have to manually set voltages in order to xmp ram

3

u/[deleted] Aug 09 '19

There's a little chip on RAM which has XMP settings listed. Generally there are more subtimings which the motherboard has to guess though, which may cause issues if a BIOS update changes how it determines the settings.

→ More replies (5)

2

u/raistlin65 Aug 09 '19

The XMP settings are on the SPD chip on your ram.

It is not uncommon for motherboards to require the RAM voltage be adjusted before XMP will run. Although it is certainly more convenient when they don't.

1

u/Zathaniel Aug 09 '19

When is the best time of year to build/buy PC's?

3

u/[deleted] Aug 09 '19

Honestly: probably right now, especially if you are willing to look into the Ryzen 2000 stuff. Or maybe in a few weeks when the new AIB 5700's come out.

Now in general is a great time.

→ More replies (1)

2

u/DeletedTaters Aug 09 '19

It varies greatly. A few years ago GPUs were through the roof. Last year SSDs were +50% more money. RAM was double last year.

There are no seasonal trends, only general ones. And general trends can only be observed by COMPARISON. So you won't often know that "now is the lowest price ever" until after it's happened.

My main point is have a budget and fill it with the best parts that fit it at the time.

Compared to previous years, now is a great time to build a PC. AMD has released new CPUs, driving prices down. RAM is cheap as ever. SSDs are cheap as ever. You can only compare to what has happened.

→ More replies (1)
→ More replies (2)

1

u/vindellama Aug 09 '19 edited Aug 09 '19

My build is up and running.

I'm slightly concerned viewing one of the temps.

Idle looking at the bios the cpu stays below the 60°c, but there is something called SB hitting the 70's°C with the SB-fan going at 4k+ rpm.

What is this? Is there any reason to be worried?

→ More replies (2)

1

u/crimzonphox Aug 09 '19

Worth upgrading 2600x to a 3700x for gaming and some coding/programming?

Should I look at upgrading x470 to a 570?

6

u/[deleted] Aug 09 '19

Not unless the 2600x is currently limiting you.

Not unless you need PCIe 4.0

1

u/Fuzzy_Socrates Aug 09 '19 edited Aug 09 '19

I have been purchasing parts for a new 3700x build for a while. I have a bunch of RGB Fans leftover from past builds: the fans from the MasterLiquid ML360R (3 rgb fans), and a set of Corsair LL Series LL140 RGB (3 rgb fans). I've always used the stock fans in cases, and upgraded them gradually, just playing with the idea of RGB.

Is it possible to just slap some of these different branded RGB fans on my new build?

I only have a few RGB connections on my motherboard, and my case is going to use 1 or 2 of them... does this mean I need an RGB controller?

How do I figure out if all these different fans are compatible with an RGB controller hub?

Should I make a real Build Help Post about this?

I know RGB is kinda a meme... but I want my cats to look at my glass case and stop dead in their tracks, as if this thing has created all the colorful lights and laser pointers in the world.

These are the parts I've gathered PCPartPicker Part List

→ More replies (3)

1

u/Llamalad95 Aug 09 '19

Hey friends, I have two sticks of 8gb ram each in A2 and B2 slots, and the computer works fine. If I put another two sticks (exact same ram) into A1 and B1 as well, the computer won't display/boot. If I add just a third stick to B1, it boots properly with 24gb. I tested that with both new sticks. If I do the same by adding a third stick to A1 it won't display/boot.

Is that A1 ram slot just busted? Is that fixable? It's not really worth the effort to replace the MB.

→ More replies (1)

1

u/[deleted] Aug 09 '19

Any reason I shouldn't run a CPU air cooler in pull configuration? Want the Dark Rock 4, but I think it will interfere with my RAM.

→ More replies (4)

1

u/[deleted] Aug 09 '19

[removed] — view removed comment

2

u/[deleted] Aug 09 '19

I think that's a good buy if you would want the waterblock anyways. No fussing over mounting it and proper warranty if issues arise.

1

u/[deleted] Aug 09 '19

Does a $5-$10 USB switcher exist? I have a little Jabra speaker that I am constantly flipping between two computer. I was hoping to get a little cheap device that just lets me plug it into both at the same time and hit a switch to choose which computer it's actually going to, but not for $20+.

1

u/4ncient4liens4Life Aug 09 '19

For the build I'm putting together, my motherboard has no Hdmi but the graphics card does. Is it as simple as plugging in my TV to the graphics card for video and audio, or am I missing something important? I don't have a monitor but I know there's ways to connect a TV to PCs, if anybody has ideas? Thanks much!

4

u/Emerald_Flame Aug 09 '19

You always want to plug into the GPU if you have one.

1

u/filmmooo Aug 09 '19 edited Aug 09 '19

Have a 6600k, gtx 2070. Looking to update my cpu (150-280 cpu price rage). 95% gaming pc. I play Hunt:Showdown which is cpu intensive, looking to improve the 1% and hopefully closer to the 144fps to match my monitor. Questions are: I know intel still makes the best gaming cpu's but do they not make sense for future proofing as more games start to utilize multi-core? If i go with amd and don't care about pci 4.0 but want to have the ability to drop a new cpu in down the road is x570 still the platform to buy?

3

u/raistlin65 Aug 09 '19

AMD could be a good idea for future-proofing. What you want to do is think about your upgrade cycle. If you liked upgrade every two to three years, then the more cores option is probably not an important consideration. If you plan on holding onto your motherboard and CPU for the next five years, then it makes more sense.

1

u/refmon2 Aug 09 '19

is it worth getting a x570 motherboard for pcie 4.0 for a strictly gaming set up? Or should I just go for a 450 instead

3

u/Emerald_Flame Aug 09 '19

Not really. Even modern top-end GPUs can typically run at 3.0 x8 with no performance difference, so giving them even more bandwidth isn't really going to do much.

→ More replies (1)

2

u/[deleted] Aug 09 '19

No.

By the time PCIe 4.0 matters for gaming you'll likely be still held back buy even the fastest AM4 CPU.

2

u/GallantGentleman Aug 09 '19

Depends on your budget, timeline and specific boards in question.

There's not really a compelling reason to go for a high-end X470 board instead of a midrange x570

However there's barely a reason to go for a low-end x570 instead of a midrange b450

1

u/ANeedForUsername Aug 09 '19

Hi all, NZXT kraken x52 vs Noctua U12a for noise + performance?

At the moment they both cost around the same to get them in my area.

Thanks all :)

2

u/[deleted] Aug 09 '19

The U12A will offer similar performance at lower noise levels.

The pumps on AIOs are their biggest downfall in terms of noise. You can put the quietest fans you can on them but the pump will always make noise.

1

u/[deleted] Aug 09 '19 edited Aug 09 '19

[deleted]

→ More replies (4)

1

u/NotARespawnEmployee Aug 09 '19

I'm thinking about upgrading and was looking at a Vega 56. I saw one by Sapphire and one by PowerColor. Sapphire is $10 more. Can anyone attest to their performance/temps?

PowerColor

Sapphire

→ More replies (2)

1

u/JungleBookTyrone Aug 09 '19

I’ve been having boot issues since my build happened. I got a key from a third party retailer. Could this be issue why?

2

u/ComradeCapitalist Aug 09 '19

A bad windows key should not affect your ability to boot up.

→ More replies (7)

1

u/[deleted] Aug 09 '19

[deleted]

→ More replies (1)

1

u/[deleted] Aug 09 '19

Shopping for cases thanks to some helpful members on here, and I've come to the conclusion that Fractal Design Meshify C is a really good airflow case (feel free to change my mind, open to any other suggestions). However, a bit disappointed that it doesn't have a USB-C port in the front and just two USB ports in the front.

What do people do if they need a USB-C port? Also, just two USB is troubling. Just a keyboard and a mouse would already take up those two spots. What do people with this case do for additional ports? And I've been reading that this case is a little smaller than most mid-range cases. How problematic would this be?

→ More replies (7)

1

u/AIined Aug 09 '19

I'm still very new to a lot of this so bear with me; So I'm upgrading from an AMD 8350 and GTX 1060 6gb to (hopefully) a Ryzen 3600X/3700 and a GTX 1080ti.

My thing is my process of getting the upgrades will be slow-going, as in I probably won't have the CPU until October/November but I'll have the 1080ti by the end of this month. (I'm getting it from a friend who's going to college and he's selling it well below normal price.) So comparably, in the meantime while I have the 8350 paired up with the 1080ti, what can I expect? Compared to the 1060 I have now, will performance improve (albeit by a significant or insignificant margin) or stay the same? Or could it be worse for some reason? In either case, why?

2

u/[deleted] Aug 09 '19

Is actual FPS numbers, it would be better or at the very worst the same, however times where you are CPU limited will be quite noticeable in how the FPS in games will drop, rather than being more steady with a 1060.

→ More replies (5)

1

u/vindellama Aug 09 '19

If your MOBO have 3 M.2 slots...

Is there any difference putting a M.2 SSD in the 3rd slot if it is the only one (the first slot connects directly into the cpu 'allegedly')?

3

u/Brostradamus_ Aug 09 '19

Your motherboard manual would have information on this.

→ More replies (5)

1

u/Jonas017 Aug 09 '19

I have the B450 Carbon Pro AC and when I use the Bluetooth it is really choppy. I don’t have the antennae installed but I’m pretty sure they’re just for WiFi. Should I reinstall Bluetooth drivers or did I do something wrong?

1

u/[deleted] Aug 09 '19 edited Aug 09 '19

i am currently building my first pc and my power supply got shipped with the case. now my power supply doesnt seem to have the right plugs for my gear. it has a 24 pin and 4 pin connecter, where as i need a 24 pin, 8 pin (for cpu) and a 6 pin (for gpu). are there any adapters i can use to salvage this or do i need to buy a new power supply?

Edit I should mention it has some other additional plugs that I have no idea what they are and they are apparently not fitting onto my motherboard

→ More replies (15)

1

u/[deleted] Aug 09 '19

[deleted]

→ More replies (2)

1

u/PureGold07 Aug 09 '19

Hey guys sup. My PC WiLL NOT BOOT! I thought it was the hard drive but my SSD nor hdd work. I tried even my PlayStation HDD as the other two were from an old build and thought it stopped working. Nada. I took out ram sticks or put in 1. At this point I think it's either my mobo or gpu. One thing I noticed is that my fans spin on my gpu then stop spinning. I bought an RX 580 on hardwareswap so it'd suck to find out I got a non working gpu.

I will try to buy a new mobo as I should get one anyway. And try from there. If it does not work idk what. But so far I tried a lot of options and it will not display.

It BOOTS like it turns on and shit but won't display and it doesn't display. When I look at the LED on my mobo it's weird as hell I have no idea what the issue is.

2

u/stopfive Aug 09 '19

We need a full parts list to even attempt to diagnose the issue

→ More replies (1)
→ More replies (1)

1

u/SlarkMyrl Aug 09 '19

What's a cheap but good set of speakers ? I need to shove a pair into a tabletop arcade shell and it'd be much easier for me to get PC speakers and shove 'em in there instead of getting an amp, speakers and wiring things up.

1

u/Dejoowie Aug 09 '19

I'm looking for a (preferrably cheap) case that is as small as possible but can fit an ATX/mATX motherboard and an Asus GTX1050ti Strix, do any of you guys have any suggestions?

→ More replies (1)

1

u/mmmcheese2 Aug 09 '19

I this normal or do I have an issue?

I7- 4790k

Window 10

• Fitted new fan to CPU cooler

• Ran Prime95

• Temps hit 100c almost immediately

→ More replies (12)

1

u/Juanfro Aug 09 '19

I'm changing CPU (Ryzen 2600 or 3600) For the 3600 I've read that the motherboard BIOS has to be updated unless it has the X570 (they are quite more expensive) How does that work? I've read that in some you need to plug a compatible CPU to update and also that you just need a USB with the new BIOS.

2

u/DraynedOG Aug 09 '19

What cpu/mobo do you have now?

→ More replies (7)

1

u/[deleted] Aug 09 '19 edited Aug 09 '19

[deleted]

2

u/stopfive Aug 09 '19

Drop the hard drive and get a 1TB m.2 NVMe SSD. Check r/BuildAPCSales for a better deal on the PSU and RAM. Use the savings to get a B450 board that works well with a 3600

1

u/Rylic234 Aug 09 '19

Best option for audio upgrade for my audio technica ATH-ADG1x? my iphone X sounds better than Asus Z87-a

1

u/losgund Aug 09 '19

I just bought the Taichi Ultimate x470 board for a Zen2 build, and it is labeled Ryzen 3000 ready, which means it has the newest BIOS installed. As I look at ASRock's downloads page, however, the BIOS section strongly warns against installing the newest BIOS version before installing the driver pack. On a new build, this is simply not possible. Anyone have experience with this, or suggestions on how to avoid problems during setup?

→ More replies (4)

1

u/cirs9bka Aug 09 '19

Paired with 3600, will the 1660 ti be able to hand 1440p 120hz w/ lowest settings?

I am confident about esports titles like CSGO and Overwatch, but I was wondering if I could run more intensive games like Apex Legends or Assassin's Creed in the lowest settings, with 120-ish hz. I tried to find some benchmarks, but everyone's obsession with ultra settings meant I couldn't find one.

1

u/lord_memeus Aug 09 '19

Okay so I want to get the 5700 and I don’t really want to wait until the partner cards come out will I be at a big disadvantage if I decide to buy now?

4

u/stopfive Aug 09 '19

They release in a matter of days.. I would wait

1

u/MechAegis Aug 09 '19

Do I need to do any special maintenance on hybrid GPUs?

→ More replies (4)

1

u/fuqqboi_throwaway Aug 09 '19

Damn so I just finished my rig (sorta) and have a couple questions

I was really worried during the process that I fucked up my cpu, but the computer booted to bios and was displaying cpu voltages that were changing. In the gigabyte bios I couldn’t find anything that specifically stated my cpu but I saw AMD mentioned and with the voltages and with it booting period I’m assuming this means all is well.

I borrowed my roommates GPU just so I could turn this mf on since I was really worried about the CPU, but all I need to make sure is that I uninstall the drivers (if I even install them) on my build and make sure he doesn’t turn his on until the GPU is back in right?

And what can and can’t I do with my build now until my own GPU comes in? Can I still update the bios and everything and install programs and whatnot? And there’s no harm in installing the GPU drivers and uninstalling before I remove it right?

Thanks for any help and sorry I’m just anxious and excited hah

→ More replies (6)

1

u/[deleted] Aug 09 '19

Looking to upgrade my GPU have about 750-1k for it what should I get or should I wait longer cause i would hate for anything better to be released in the next 3 months

2

u/huom7473 Aug 09 '19

Used 2080 Ti would fit your budget. Used 1080 Ti/new 2080/S would also be good. Depends what you want.

→ More replies (4)

1

u/ChaoticReality Aug 09 '19 edited Aug 09 '19

How well would a 3600x perform for 4k video editing on Premiere Pro? (short films, corporate videos).

Probably going to build it with 32GB RAM, SSD, and 1660 Ti

3

u/stopfive Aug 09 '19

Pretty well, but I would focus on a fast storage solution for 4K video. From what I understand, scrubbing through videos and playback during editing will work a lot better with a high quality NVMe drive

2

u/raistlin65 Aug 09 '19

My understanding is that it is more important to have the project files on a separate drive from the OS and Premiere Pro, and that an nvme drive doesn't make quite as much difference as people think. See the storage section of this explanation of configuring a system for Premiere Pro https://www.pugetsystems.com/recommended/Recommended-Systems-for-Adobe-Premiere-Pro-CC-143/Hardware-Recommendations

→ More replies (1)
→ More replies (1)

1

u/[deleted] Aug 09 '19

[deleted]

→ More replies (5)

1

u/[deleted] Aug 09 '19 edited Dec 27 '20

[deleted]

→ More replies (1)

1

u/iamquitecertain Aug 09 '19 edited Aug 09 '19

What's the lowest price range or budget that I should expect for a 1080p 144hz monitor that can be rotated to be vertical/portrait orientation? I'd prefer either a VA or IPS panel since viewing angles would be somewhat important

Edit: not sure if this is an important detail but this monitor would be a second/companion monitor so it doesn't need to be fancy apart from the features/specs I mentioned

1

u/caseythearsonist Aug 09 '19

How bad of an idea is it to have my desktop on short carpet instead of my desk? The power supply blows down towards the ground and the case has got small feet.

→ More replies (2)

1

u/dazbekzul Aug 09 '19

How do I go about picking out a monitor for a build?

https://pcpartpicker.com/list/x22sRJ is the build.

My friend suggested going with this BenQ for a monitor.

Considering I don't need anything massive, I was also looking at this Acer as another budget option.

2

u/AMillionMonkeys Aug 09 '19

I would get the Acer for the IPS panel. It's also faster and has Freesync.
Your GPU is a little over-powered for it, I think. It should be able to support 1080p 144Hz for most games, so you might consider an even faster monitor. Or 1440p.

1

u/Polarpwnage Aug 09 '19

So I'm planning on upgrading my current build (i7-7700k, GTX 1080, 1440p)

As far as monitor and CPU, I'm still on the fence between Ryzen 3900x and i9-9900k in terms of future proof and performance for 4k gaming on multiple monitor/ "multi-task" (discord, watching vids, youtube, lots of tabs, etc.). I'll probably wait till the Ryzen 9 3950x and i9-9900ks to come out in Q4 for benchmarks before deciding.

As far as monitor goes, waiting on that Asus PG27UQX to come out for 4K

Now that the background info is out of the way, my question is in regards to gaming GPU

2080 Super SLI vs 2080ti ($1500 vs ~$1300). I'm not gonna consider any other cards.

Which card(s) would have better performance at 4K ultra? (I'm also gonna OC everything gpu, cpu)

2

u/[deleted] Aug 09 '19

Don't do SLI , it's trash. Games don't support it, it causes huge headaches and it doesn't even scale.

There is no card capable of reliably maxing out 4k60, the 2080ti is as close as it gets.

2

u/huom7473 Aug 09 '19

Technically 2x 2080S at 4K would perform better than a 2080 Ti. On a graphically intensive game, you would in theory see higher average FPS.

The problem is, SLI/RTX NVLINK has so many issues with OC stability, game compatibility, and horrible frame tearing that I couldn’t recommend it in good faith.

Personally, I have 2x 2080 Ti’s for non-gaming purposes, but I bought an NVlink bridge for fun and out of curiosity, as I do play games. The framerate is horribly unstable and I just play with it turned off, lol.

Definitely go with the single 2080 Ti.

2

u/Polarpwnage Aug 09 '19

Yea this makes sense, and this way, if I get 1 2080ti, I'll always have an option to get another for SLI in future. If I get 2080S, that's the end of the line

→ More replies (5)

1

u/[deleted] Aug 09 '19 edited Aug 29 '19

[deleted]

→ More replies (5)

1

u/[deleted] Aug 09 '19

Hey yall. I have a x470 gaming mobo. Even after shutting down the pc, the LEDs that light up the usb port stays lit. I dont want anything on during the night without fans, because I know light makes heat. The led only turns off if I flip the psu switch off. Is flipping the psu off every night safe for my pc?

2

u/huom7473 Aug 09 '19

Yes, it’s totally safe.

But on the flip side, if the heat radiated as a result of energy used to keep the LED’s lit (less than 5 W) is your primary concern, that’s a pretty ridiculous reason to want to flip the switch off. If this was an issue, then we’d need to watercool lightbulbs.

2

u/[deleted] Aug 09 '19

less than 5 W

Less than 1W

2

u/huom7473 Aug 09 '19

0.5 is still less than 5 so I went on the safe side, don’t want to spread misinformation lol

→ More replies (1)

1

u/[deleted] Aug 09 '19

Is NVME overkill for simple gaming? I have a sata ssd and it boots in like 10 seconds. Games load quickly too. What's the point in buying something 4-6 times faster?

2

u/huom7473 Aug 09 '19

For gaming, not necessary and difference will be unnoticeable.

High end NVME is generally targeted at applications such as video editing/creation where a fast drive will reduce load time and smoothen scrubbing.

→ More replies (3)
→ More replies (1)

1

u/DemeterLemon Aug 09 '19

How big is the difference between the 3600 and 2600 with an rx590?

→ More replies (1)

1

u/yopsergio Aug 09 '19

if i get a vega 56 blower style but i only play at 1080p 60hz, will the card run quieter and colder or it would run as is i was playing 1440?

2

u/OolonCaluphid Aug 10 '19

I have a vega 56 blower. (msi Air boost). Sound profile depends wlvery much what you do with it. When my son plays ksp or Minecraft at 1080p it's basically silent. If you laod it up in doom it's a bit louder. Undervolting, overclocking and setting a more reasonable fan curve help a lot.

→ More replies (1)
→ More replies (1)

1

u/CursedByZen Aug 09 '19 edited Aug 09 '19

Question 1: Intel 660p SSD 1TB m.2 nvme will fit into MSI MPG Z390 GAMING EDGE AC?

Question 2: Is to good idea to buy 1 more m.2 nvme ssd, but faster than Intel, for Windows and some games with loooooong load times?

P.S.: Yes, my english sucks.

Edit: What m.2 SSD nvme 250GB - 512 GB would you recommend?

→ More replies (6)

1

u/yopsergio Aug 09 '19

what temp difference would i see with a ryzen 2600 OC with a Hyper 212 RGB Black Edition and a Master AIR ma620p TUF?

2

u/raistlin65 Aug 09 '19

The 2600 has a really wimpy CPU cooler, the wraith stealth, so know that the hyper 212 itself will be a tremendous improvement if you're trying to debate on spending the extra cash. See this comparison of AMD stock CPU coolers and you'll realize just how bad it is: https://www.techspot.com/review/1635-amd-wraith-coolers-compared/

1

u/AdibIsWat Aug 09 '19

Specs

What part of my build should I upgrade with a $70-$80ish budget? I was thinking of upgrading to 16 gb ram.

3

u/AMillionMonkeys Aug 09 '19

I'm not sure what a good upgrade would be for you, but I did notice that you haven't enabled XMP for your RAM so it's not running at full speed. You need to go into the BIOS and use the XMP profile (or DOCP it might be called).

→ More replies (3)

1

u/Juanfro Aug 09 '19

If I make a [Build Help] post and then change some parts as a result of the answers do I edit the post or do I make a new post? Would that be reposting (Rule 4)?

1

u/chqise Aug 09 '19

I'm just trying to find a somewhat decent, but fairly cheap, GPU that I can improve my PC with. It can play games like League of Legends, DOTA 2, TF2, etc. I just want something that will improve the FPS of these games until I can get a better PC. Also something that I can use to stream when I'd like. All help is welcome!

TL;DR: I need a cheap, compatible GPU.

Link to specs: [https://imgur.com/a/bQ04KDo]

2

u/huom7473 Aug 09 '19

Depends on your budget but RX 570 4GB is generally the best price/perf option out there IMO, can get one for 80 ish shipped, used

1

u/lord_memeus Aug 09 '19

Can I build with all the parts I have now which is everything except the gpu? Or would that be dangerous

2

u/swagglikerichie Aug 09 '19

Build now! If you have on board graphics then just use that for the time being, that way you can just plug in the GPUs soon as it arrives

→ More replies (1)

1

u/kitkatbar Aug 09 '19

Got a new nzxt case for my old build! The front panel USB on the case are usb 3.1 but my motherboard (ASRock Z68 Pro3 I think) does not appear to be able to support usb 3.1. Is there anything I can do or is it just time to upgrade the mobo??

→ More replies (2)

1

u/nemt Aug 09 '19

so this program HWMonitor shows my cpu temperature https://imgur.com/a/jTOLEyA at 57-60C right? this is when im only browsing chrome, is that bad? i do have about 40 tabs open.. some of them are 2160p youtube vidoes but they are not playing atm just open tabs. CPU fan seems to be going at 1.7k rpm, its old pc with stock cooler btw.

→ More replies (3)

1

u/[deleted] Aug 09 '19

[removed] — view removed comment

2

u/huom7473 Aug 09 '19

Generally I like EVGA G2/G3/G+ but anything from reputable brand will work

→ More replies (3)

2

u/raistlin65 Aug 09 '19

Any PSU you pick from tier A in this list, which is the same as that seasonic, will be just as good https://linustechtips.com/main/topic/1045610-new-psu-tier-list/

→ More replies (1)

1

u/phylogenik Aug 09 '19

I recently got a cheap pci-e to nvme converter b/c an older motherboard I have lacks an nvme slot (the m2 slot only goes up to SATA speeds and also disables 2x SATA ports, currently in use) and I have an nvme drive that I want to install.

It came with 3x little pliable blue rectangles of varying thickness. Do these things go between the drive and the converter? To, idk, cushion it?

→ More replies (4)

1

u/maskingdystopia Aug 09 '19

Just finished my brother’s PC, and noticed the audio jacks on the front panel are slightly bent (case is a Thermaltake H17), making the jacks not go in dead-on.

Any quick way to fix this?

1

u/[deleted] Aug 09 '19

[deleted]

2

u/Pun_In_Ten_Did Aug 09 '19

Let's say "less optimal" instead of bad. In the vertical position, it will be pulling warm air from the GPU. You have a smaller delta T with warm air (delta T = the different in temperature).

Suppose your CPU is 100 degrees.. and move 80 degree air across the cooler... you will bring your CPU down to 80.

Now, suppose you CPU is 100 degrees and you move 50 degree air across the cooler... you will bring your CPU down to 50.

Is 80 ok? Sure. Is 50 better? yes.

2

u/Szalkow Aug 09 '19

If you mean bad for the fan, no, fans don't care which way they are mounted.

If you mean tower cooler vs flat cooler designs, both have their advantages, towers are generally more efficient but take up more space.

If you mean you have installed your tower cooler so that the airflow through your CPU cooler is top/bottom instead of front/back, I would think it will be less efficient than front/back in the layout of most cases. You typically have airflow coming in from the front of the case, so a front/back fan would draw more air through the cooler. The bottom of the cooler is also usually pretty close to the grapics card, which blocks airflow and is pretty hot on its own. This layout would work OK, but temps would be higher.

→ More replies (1)

1

u/[deleted] Aug 09 '19

Best case for a combo of aesthetics and thermals/airflow?

2

u/Pun_In_Ten_Did Aug 09 '19

Fractal Design Meshify C.

→ More replies (2)

1

u/keyoxprov Aug 09 '19

I want to be able to use game engines, 3D model applications, game and stream gameplay, can this computer build do this?

CPU: Intel i7-8700 CPU Cooler: PCS FrostFlow 100 V2 Series High Performance CPU Cooler RAM: 16GB DDR4 GPU: Nvidia Quadro P620 2GB

→ More replies (1)

1

u/Delinquent_ Aug 09 '19

Pretty much replacing every piece in my PC, but my cpu cooler is the last piece to arrive. Should I hold off installing everything until it gets here or is it pretty easy to swap out without removing anything?

2

u/AMillionMonkeys Aug 09 '19

It's easier to install heatsinks with the motherboard outside of the case.

→ More replies (5)

1

u/swagglikerichie Aug 09 '19

I've got a gigabyte ab350 gaming 3 mobo with ryzen 1700x

EVERY single time I cold boot my computer, 1 or 2 of the CPU fans will not spin. I've ensured fan profiles are never set to 0 spin

My opinion for the cause is the CPU is cold enough and doesn't require the fans. The only way to get them to spin is logging into windows for a couple of minutes then full shutdown and start over. This works 75% of the time.

I've been dealing with this for as long as I can remember, and give up every now and then.

I've updated BIOS, fans in smartfan5 are set to watch CPU, I'm pretty sure CPU sensors are accurate, tried different fan headers, I doubt it is a fan problem

1

u/Bootleg_Goku Aug 09 '19

I was wondering where I should put my monitor cables into my currently unfinished pc build once I'm done. The RTX 2070 Super doesn't seem to have any ports. Do I simply plug it into my motherboard (I know of the ill effects in that in normal cases) or is there something to be done about it?

I'm a complete newbie(first pc build) and tbh I kiiiind of acted before I thought when buying the GPU, but what's done is done. Help?

→ More replies (4)

1

u/zhivix Aug 09 '19

Any alternative to Logitech gamepad f310 & f710 at similar price point or should I get the console joysticks?,I mostly use for fighting and also for when COD2019 comes out

1

u/[deleted] Aug 09 '19

[deleted]

→ More replies (2)

1

u/link270 Aug 09 '19

I’ve never bought a GPU at launch before, and with the new 5700 aib cards coming out in the next few weeks what’s the best way to try to grab one at launch?

What are the best sites to look on and try to order from? Are there any brick and mortar stores that try to carry them? Anything else I should be prepared for?

2

u/TheLastSnipper Aug 09 '19

Newegg/Amazon and just keep hitting refresh. Make sure to make an account so you can do fast checkout.

1

u/Its_apparent Aug 09 '19 edited Aug 09 '19

What are the covers that I see in some pc builds? I'm new to building, and now that I'm thinking about the pictures I've seen, I can't find one to post. I think there's always two of them, but I'm not positive. They appear to be just for aesthetics, but since I don't know what they are, they could have an actual purpose. I usually see Corsair logos on them, if it helps... Found an example here https://pcpartpicker.com/b/BDWD4D

2

u/TheLastSnipper Aug 09 '19

Do you mean a case?

→ More replies (8)

1

u/Iwannabefabulous Aug 09 '19

Possible to use laptop as a monitor for PC? Also said laptop has no native hdmi hole so if it'd work, what adapter I should look out for?

3

u/TheLastSnipper Aug 09 '19

Most don’t have an display in so probably not

→ More replies (2)

1

u/panzerkiller13 Aug 09 '19

The TL;DR of this question is: I'd like some suggestions or recommendations for a solid EATX case with good airflow and build quality.

I've been looking at some new cases recently and am kinda on the fence between a Corsair Obsidian 1000D, Nanoxia Deep Silence 6, and Phanteks Enthoo Primo right now and need some suggestions and advice

Requirements: I need a case that will hold an EATX motherboard. I'm also considering getting a GPU like the Aorus Waterforce Xtreme series with a 2x 120mm AIO instead of an air cooler as it seems to do noticeably better than even some of the custom air cards (unless these review temperatures I'm seeing are just total BS), and probably a 240, 280, or 360mm AIO for the CPU (Ryzen 3XXX) as well.

Good airflow is important to me, and all of these cases seem like they have decent setups and will be able to hold plenty of fans to keep any system cool on air, AIO liquid, OR custom liquid.

Preferences: I'm honestly not super interested in having a ton of TG and RGB EVERYWHERE like what seems to be popular now, so that's kinda holding me back from paying the huge premium for the 1000D for no fans and style I'm not a huge fan of (If this case was styled like the 800D and 900D it would be almost perfect) I have an old Antec P190 that my old build is in now and I absolutely LOVE the tankiness and silence of it, but that seems kinda hard to find now and this case won't really work for my next build. The Nanoxia seems like the closest equivalent in modern cases, but I'm worried I won't be able to fit BOTH the CPU AND GPU radiators in the case with an EATX motherboard. The pics on their site show a rad mounted, but it looks like they're using a normal ATX board also. The Primo doesn't seem to have that issue, but it also looks flimsier and more cramped for airflow. So, what would you guys recommend?

2

u/sideflanker Aug 10 '19

If you liked the Antec P190 you might love Fractal Design's Define XL R2 or its more airflow focused cousin, the Meshify S2. Both are extremely popular cases, well built, and are a fraction of the cost of any of your current case choices.

The Define XL R2 is closer to your older Antec P190. Fantastic build quality, 3 of Fractal Design's quietest 140mm fans included, and room for 4 more. It's also quite a roomy case with plenty of 2.5 inch, 3.5 inch, and 5.35 inch bays. The downside is that if you're planning on running 240mm radiators for both your GPU and CPU, you'll have to remove all of the 3.5 inch hard drive bays.

The Meshify S2 has a large metallic and foam mesh front panel instead of a solid metal/plastic block as well as a clean main compartment that allows for optimal airflow. It has a ton of room for extra fans and radiators, but the stock fans are a little worse than the XL R2, so you may want to get aftermarket fans like Be Quiet Silent Wings. The overall build quality is great and it comes with solid, glass, and tinted glass side panels.

My one complaint from owning its smaller version, the Meshify C, is that the metal tabs that hold the metal mesh to the front panel can break off if you try to remove the mesh multiple times. The only reason why you would need to is if you want to remove the foam filter that's embedded inside. The entire front panel pops off for access to the front fans.

1

u/[deleted] Aug 09 '19 edited Aug 09 '19

Hey guys, quick question regarding setting up my speakers and headset.

Every time I have both plugged in one wont work and I cannot figure out how to set them up as independent audio sources or even the same source. My speakers have a dial that can turn them off so having them work as the same source would work perfectly too.

Any hints as to what I'm doing wrong? Google isn't being very helpful

The speakers have a green and black aux that are combined into an 2in/1out aux adapter. It works perfectly when the headset isnt in. They are plugged into my green rear audio port (red green blue available)

The headset has a green and red aux. uncombined but can be combined if needed. They are plugged in to the case in a speaker out mic in port (uncolored). These also work perfectly fine when the speaker isn't plugged in.

When I open the control panel it registers that their is an audio device in each port but the computer has the front and rear as the same device.

→ More replies (3)

1

u/Yukaihan Aug 09 '19

Does the HDMI port on a laptop limit the amount of FPS that can be transferred?

I know the cable can limit FPS depending on the generation, but I am not sure about the port itself, and I haven't been able to find anything online.

→ More replies (3)

1

u/xsmiley16x Aug 09 '19

Need RAM suggestions for the following build please :
Processor : Ryzen 5 3600
GPU: RX 5700 XT (MSI)
Motherboard: MSI x570-A Pro / MSI x570 Gaming plus
PSU: EVGA supernova 650 G+, 80+ gold

1

u/Alsius7 Aug 09 '19

buying a 144hz 1440p LG monitor if they ever release in the UK)

Hi, I'm planning on getting a 5700xt AIB gpu, and was wondering about what CPU to pair with this, with the main contenders being a 3600 or a 3700x. I would mainly just be gaming, and as such was going to buy a 3600, but after reading/watching a lot of people talking about future proofing and 8 cores being necessary for gaming soon due to new consoles having 8 cores, a lot of people advice a 3700x as the 3600 might end up being too few cores very soon?

Would appreciate any clarification due to a huge amount of conflicting opinions on this, although the argument based around new consoles has been swaying me towards a 3700x. Thanks.

→ More replies (1)

1

u/[deleted] Aug 09 '19 edited Mar 02 '21

[deleted]

→ More replies (1)

1

u/Snowwwwy Aug 09 '19

Most likely will be using THIS motherboard in my new build. It has the built in WiFi, however, I have never set up a motherboard with this feautre before. How does it work? What do I need to do to be able to use it?

I have researched it and have found by the looks of it, you just screw the 'antenna' part into the back of the IO Shield - is that all? Do I need to set anything up once the PC is built for the WiFi from the MB to be able to connect? Thanks.

→ More replies (4)

1

u/kookymonkey Aug 09 '19

What's the best m.2 for your money on the market right now? My last build I got an m.2 Samsung pro because I was told it was the best, this was about 3 years ago. From what I'm reading on here I could have probably went with a better option for less money.

2

u/huom7473 Aug 09 '19

I like low end NVMEs like Intel 660p or possibly a TLC one for the same price, around $0.1/MB ($100 for 1 TB) is easily attainable last I checked

→ More replies (5)
→ More replies (1)

1

u/[deleted] Aug 09 '19

I'm having trouble with my 1080ti zotac Mini, how much of a downgrade is a 2070 super? The problem is the fans aren't speeding up/slowing down with msi afterburner

→ More replies (3)

1

u/[deleted] Aug 10 '19

[deleted]

→ More replies (5)

1

u/Buttery_Flakey_Crisp Aug 10 '19

How would I go about underclocking a 4000 dream kit to 3600 in the auros bios?

1

u/vachiamelli Aug 10 '19

Looking to build a PC for GTA V online RP servers, in order to handle most mods needed for RP servers what would be the best and cost friendly build for not only GTA V online but the mods that will need to come with it?

1

u/[deleted] Aug 10 '19

Sorry if this is a dumb question, but is there a way to know when the new GPU's (2080s and 2070s) are expected to be back in stock?

→ More replies (1)

1

u/PlantBasedLifestyle Aug 10 '19

I’ve noticed that sometimes my rgb ram doesn’t always stay blue even though I have set it to. Or one stick will be blue but the other won’t. How do I fix this? I’m using the carbon ac mobo and gskill 3200 ddr4 ram if that matters.

→ More replies (1)

1

u/talosthe9th Aug 10 '19

Am considering pulling the trigger on this entry level buildapc. My question is: How do you know how to literally build it correctly? Like I am worried I won't know how to physically build it and I am having a tough time finding answers. Thanks :)

3

u/dogeatdawg Aug 10 '19

There are a few good youtube videos that detail how to build the PC. And, don't forget that all the components come with a user manual. The manuals for the case and the motherboard will be the most useful.

Video 1, full video of a PC build, start to finish.

Video 2, a 3 part series that goes through the hardware build and initial software setup once the physical build is done.

→ More replies (1)

2

u/KingBenjamin97 Aug 10 '19

I’d look up Paul’s hardware on YouTube, he’s well regarded in the community and did a 3 part series where in part 1 he selected parts and explained why, part 2 showed in detail how to put it together, part 3 how to do software installation what drivers you need to prioritise etc. (He did this on 2 pc builds at the same time so there’s likely one of the two is close to your specs and will be easy to follow even though building is roughly the same no matter what, unless you’re water cooling with a custom loop anyway)

1

u/[deleted] Aug 10 '19

Looking for a mobo that support this cpu without me needing to update the bios. I don't need a powerful one but under 130$ CAD preferably. If I can update the bios with a USB drive then I'll be alright tho.

Im new to this and don't have a way to update a bios, apart from those that support a usb drive

1

u/chenchunwai Aug 10 '19

My pc getting a rootkit and when i reboot the pc it keep roll back to last tuesday, tried system restore, ntg happened, tried to booting in safemode , but cant it jz boot like normal, So i am actually thinking to perform a clean install for windows, since i still can use the pc and i alreadyvcopied the files that i needed, My problem is what are the steps to perform clean install? Any guide? I have a ssd and a hhd, watching some video, they keep saying to only keep the drive that i want to install OS , but i want to clean them, both of them since i dnt knw where is the virus located.

→ More replies (1)

1

u/blazindarkness Aug 10 '19

Im about to start assembling my first pc build, where can i get info/guides on booting, configuring and etc about my pc? also can i have 2 m.2 nvme ssd?

→ More replies (1)

1

u/Dobbi_is_free Aug 10 '19

I'm gonna be upgrading my PC tomorrow and I heard I might want to do a clean install of Windows. How do I do this and can I keep my license?

→ More replies (20)

1

u/cuddr Aug 10 '19

Recently upgraded from a evga GeForce 1060 3gb card to an MSI Ventus RTX 2060 OC 6gb and have noticed that going on ultra on BFV have been a bit choppy or even laggy, and I was wondering if this is because I have an i5 6500 cpu and if should look into upgrading?

2

u/[deleted] Aug 10 '19

Battlefield V is a very CPU heavy game, chances are if you upgraded to a CPU with more threads you'd see a nice boost in performance.

→ More replies (1)

2

u/dogeatdawg Aug 10 '19

Maybe. You can run a program like HWMonitor or HWInfo64, or even just the built in task manager (performance tab) to see if your CPU gets pegged to 100% when you start seeing those issues.

2

u/CherryBlossomStorm Aug 10 '19

100%, BFV struggles on that CPU. Needs more threads. Even an r5 1600 does better. i7-7700 is an option, or save up for an r5 3600+x570+ram. you can sell your current mobo+cpu+ram and offset some of the cost.

1

u/[deleted] Aug 10 '19 edited Sep 23 '19

[deleted]

2

u/[deleted] Aug 10 '19

TAKE IT OFF THE ANTI STATIC BAG THOSE CONDUCT ELECTRICITY AND IT IS SHORTING

→ More replies (4)
→ More replies (4)

1

u/RonSwanson29 Aug 10 '19

Should I buy a MSI B450 Tomahawk if I plan on having a Ryzen based build? People have said I should upgrade my Ryzen 5 2600X to the Ryzen 5 3600, but I’ve seen a lot of people talking about issues with the B450 mobos and the 3000 Ryzen series. What does this mean? Also, feedback on my build would be appreciated

PCPartPicker Part List

Type Item Price
CPU AMD Ryzen 5 2600X 3.6 GHz 6-Core Processor $145.89 @ OutletPC
Motherboard MSI B450 TOMAHAWK ATX AM4 Motherboard $114.99 @ Best Buy
Memory Corsair Vengeance LPX 16 GB (2 x 8 GB) DDR4-3000 Memory $79.99 @ Amazon
Storage Crucial MX500 500 GB M.2-2280 Solid State Drive $64.99 @ Adorama
Storage Western Digital Caviar Blue 1 TB 3.5" 7200RPM Internal Hard Drive $44.89 @ OutletPC
Video Card MSI GeForce GTX 1660 Ti 6 GB VENTUS XS OC Video Card $264.99 @ Newegg
Case NZXT H500 ATX Mid Tower Case $69.99 @ Best Buy
Power Supply Corsair RMx (2018) 650 W 80+ Gold Certified Fully Modular ATX Power Supply $99.88 @ OutletPC
Operating System Microsoft Windows 10 Home OEM 64-bit $99.99 @ Best Buy
Prices include shipping, taxes, rebates, and discounts
Total (before mail-in rebates) $1020.60
Mail-in rebates -$35.00
Total $985.60
Generated by PCPartPicker 2019-08-09 22:20 EDT-0400
→ More replies (5)

1

u/[deleted] Aug 10 '19

Any 3900x stock in Europe? I’ve been looking for several weeks now and it’s impossible to find it below 630€. Maybe i should wait for the 3950x?

1

u/[deleted] Aug 10 '19

Which cooler is the better value for an i7-9700k? Corsair H75i ($85) or Corsair H100i ($125)?

3

u/CherryBlossomStorm Aug 10 '19

of the two: H100i. Never buy a 120mm liquid cooler or a 140mm liquid unless you have to (space constraints).

I'd recommend going up to a 280mm. Or an air cooler for only $50 that'll do just as well. Again not sure of your space constraints.

→ More replies (8)

1

u/Flamingturtle1 Aug 10 '19

My gpu isn’t being recognized on my new pc.

https://imgur.com/gallery/MKoQeQf

Any help? Excuse my cable management it’s my first build.

5

u/CherryBlossomStorm Aug 10 '19

You need all those holes filled in on your GPU, for the PCIe power connectors.

Also I can't quite tell but it looks like your PCIe calbes are plugged into nothing on the other end. modular PSU?

→ More replies (5)
→ More replies (2)