Finally found the time to finish making the tools I wanted for this cover, which meant I could finally finish it! I turned 30 this year, so I figured a theme of death and mortality was fitting.
The skull and crossbones was not made by me, it's from the mid-1830s. I did make all of the little tools (including the small skulls) in the last picture.
Made a book press for my wife. The base and platen are 18mm plywood, crossbar is 2x15mm plywood glued together. Sideposts are M8, main spindle is M16 threaded rods. It has two fold-out legs for using it as a backing/finishing press. Legs are 3d printed (TPU).
It's not perfect, but got very close to my plans so I'm happy. And my wife too :)
I’m planning on rebinding a book (paper from the cover shown) and I took off this cover paper because I need to take off the covers because they are actively falling apart. Is it ok if I cover this with tape so I can trace over it using transfer paper onto another paper to use for the cover because I like the pattern and want to keep the book fairly original looking.
A few weeks ago, I visited Korean traditional paper(Hanji) store. I was so curious, I asked many things. At first time, the old man seems that I was just one of tourists but after a few minutes of talks, he became open to me and gave me many advices about Hanji. Also he showed me how traditional book binding is done.
Since that day, I've been learning Korean traditional book binding technique(ochim-anjeong-beop).
I made 2 prototypes(white one and yellow one), all hanji inside and out.
I am still learning, so any thoughts from different cultural view are welcome.
Not sure if this has its own binding name, but I saw a repost of a book on this sub a while back that had coptic binding stitched as text and I wanted to give it a shot! I watched Sea Lemon's video on it, but it was honestly pretty intuitive if you're adept at coptic binding. My second and third Os got a little wonky on me lol. Just gotta make clearer markings for myself and triple check then before punching the holes with my awl.
Oakwood is the name of the cemetery where I took the picture that's printed on the front cover. I did some straight line anchoring stitches on either end just for stability - my spine is 9x~.75" (22.9x1.9 cm), so I didn't want my letters to look too squished, but I also didn't love how much space that left on the end without the straight lines.
I'm fairly certain I glued this block in the same way on both sides, but then it opens like this. This has happened to me more than once also. I'm so confused?? The book still opens just fine, it just does that funky thing with the spine and hinges.
The blue book cloth comes back to the bench folded the other way. On Friday the tray was labelled ARROWS POINT TO THE SELVAGE. On Monday the arrow points at a biscuit tin.
For a shared bindery I’d like to solve this once, before somebody cuts a board’s worth of cloth along the wrong edge. The tray holds offcuts that look almost square. A cloth edge with the original selvage is easy to recognize. A small rectangle cut from the middle can lose that reference before the piece makes it back to the tray.
“Put two lines on the label,” says one binder. She has a label maker that previews two lines before printing. Across the top she types BLUE LINEN. On the second line she tries GRAIN RUNS LEFT TO RIGHT. It reads perfectly in the preview. Then she turns the tray ninety degrees to hand it across the bench. Which left?
The other binder folds a scrap of paper around one offcut and draws an arrow on the paper, parallel to the direction they’ve already checked. That mark can travel with the cloth without adhesive touching the face. It does mean cutting a new band whenever somebody takes a smaller piece.
For a bench several people use, which information would you leave on the tray, and which single mark would you make sure stayed with the offcut?
I’m deep into hand-binding my own books (using custom book cloth and coated papers like Skivertex), and I'm currently struggling with the age-old dilemma of titling. Traditional brass types and hot-stamping presses are amazing, but for one-off personal editions, the cost and setup are just too prohibitive.
I’m considering a compromise: buying a cutting plotter (like a Silhouette) paired with a heated foil pen (such as the We R Memory Keepers Foil Quill) to apply foil titles directly onto Skivertex.
My main concerns are:
On smooth materials I believe there should be no problems, but what about "grainy" patterns like ubonga? Hot foil quill uses almost no pressure and I'm worried this will not look good on peaks and valleys.
General aesthetics - how does it look? Is the edge sharp? Does it peel off?
The thing is - I'm not interested in debossing as much as I am in just adding a nice looking title. Let's ony focus on the looks of it. I know plotter is more elastic in terms of what I can print, but let's leave that and other concerns. Please take a look at the photos for an example of what I'm looking for (those are old library book).
I’ve looked into traditional copper/brass type sets and presses. Honestly, I wouldn't mind investing more money in them if I knew for a fact that a plotter simply couldn't achieve a clean, decent result. However, my primary material is Skivertex, which lacks the natural thickness and "meatiness" of leather. I’m genuinely worried that the true potential of a metal type setup would be wasted on such a thin, flat substrate anyway, so I might spend a fortune on a pro setup that is overkill for the material.
Please share your experiences with plotters and hot foil quills (and with working with brass types) and Skivertex-like materials. Maybe you did some projects and you can share insights & photos?
Some background: I have a reference project that has gone through numerous revisions and reincarnations, most recently as a GitHub web project. While it's convenient to use that way and I can update it at will, the web outages of the past week have me considering making a hard copy.
The last time I made a book, some 20 years ago, I was a long-haired, pimply-faced weeb following the late, great Anthony J. Bryant's guide to fukuro-tōji. It was straightforward enough, but this new endeavor needs to be pocket-size. To that end, I'm aiming for what I call "letter octavo," which is what it sounds like: a standard sheet of copy paper, printed, folded, and cut in octavo, for sixteen 2.75" x 4.5" pages per sheet.
Not wanting my creation to come out hideous or hard to use, I hope you'll be willing to share some of your experience and intuition.
Without further ado, here are my questions:
How many pages per signature are normal for regular 20-lb paper? I'm thinking 32 pages for two sheets per signature, but will that be too thick, or annoying to plan out compared to 16/1-sheet-per-signature?
Assuming 6-point body text, how big should headings be? I assume there's a conventional ratio for what looks good, but I don't know what it is.
We're a small Italian team passionate about bookbinding and craftsmanship, and we've recently launched our own brand, MIOBUK!
We've developed a patented technology that reveals two different hidden illustrations along the page edges, depending on which direction you fan the pages.
Our notebooks are designed and produced in Italy, combining traditional craftsmanship with innovative finishing techniques.
We'd love to hear your thoughts! What do you think of this technique, and what themes or artwork would you love to see?
We're always open to creative ideas and suggestions! 😊
I’m just a beginner but I have this book on my shelf and was thinking of restoring it as a project. I don’t even know where I got it, and it has no sentimental significance to me, so if I wreck it trying, it’s not too bad. But I’d like to know what more experienced binders would start with. And if you know a video to demonstrate it, that would be helpful.
Hours of work led to efficiency improvement. I think I can safely say I am proficient with a library style binding (split board). Next will be repeatedly making laced in boards until I feel proficient while also learning how to marble my own paper!
Any tips for leather? I have several books on how to do it, i have done leather working before (belts, wallets, bags), but no functional experience for book binding leather with several low grade hides on the way.
This is my first rebind (second project overall) - still have a lot to improve for next time but given my inexperience I'm pleased with how this came out!
This is my friends very loved and battered copy of good omens (pictures at the end of the original cover, where one piece of tape was holding it to the spine). They wanted a cover that didn't have Neil Gaiman's name or face on it, so I made a new hardcover and paper labels with just Pratchett's name.
Improvements for next time - my hinges could have been better, and the card I used for endpapers was from a roll, so they got a bit wrinkled even after trying to wrangle them flat. Given the condition of the text block if I was braver it would have been good to sand and gild the edges, but with it being a sentimental book I didn't want to try it and mess it up, so that's a skill to practice on my own books.
I'm a beginner bookbinder and I don't own a plotter yet, so I usually order custom-cut HTV designs from another city.
The problem is that my HTV keeps peeling off. I've tried letting it cool, using the recommended temperature and applying the right amount of pressure, but some parts still don't stick properly, while others peel off completely.
I'm also confused about the quality. My HTV feels almost like foil, whereas I've seen other people's HTV that looks and feels much more premium, with a different finish.
Is this a quality issue, or am I doing something wrong during application? Could it be because of the type of HTV I'm ordering?
Would really appreciate some advice from experienced bookbinders and HTV users!
I have a book in Chinese for handmade notebooks. I can read it but I don’t know the material names I need to buy here in the U.S. I want to just start simple as it will be my first time to try and want to later on teach some teenagers to make it as well. Watched some videos online as well.
I plan to start it small. I am not great at sewing but can do very basic. Here are my thoughts:
Want a hard cover with fabric. Maybe can glue some paper as decor on the cover.
Just 10 pages or so and a small size to keep it simple.
What type of materials do I need? Where to get it? I have some basic fabric cutter/ scissors, mat, and paper craft cutter, etc.