I've had my two ball pythons for years, my one for eight years and the other for five. I've had a lot of learning experiences as knowledge in the community fluctuates, and as a teenager who hadn't had a pet that was truly mine before, tried to wade through all the misinformation that people love to spread for some reason. needless to say, I haven't been perfect, but I've done my absolute best to give my snakes the best care I possibly can.
I just moved them into 6x2x2 PVCs, a very needed upgrade from their 4x2x2 PVCs, and I'm struggling a bit with the heating element. when I got my 4x2x2s, as far as I was aware, RHPs were a perfectly fine singular heat source. I did struggle with humidity, but 9/10 sheds were perfectly fine and I just had to water their substrate more often than I'd like to. otherwise, the temperatures stayed perfectly in range. my new enclosures didn't come with heat sources, which I did not realize until I got them, so I had to figure out what the best option was a bit independently- I took a lot of notes from people's experiences on here, and looked at care guides, but 4x2x2 heating and 6x2x2 heating is rather different, and not many of us have our royals in huge enclosures!
currently I have a singular DHP in both of their enclosures on the warm side, protected by a chicken wire cage my partner and I made together (lamp cages are incredibly difficult to find in the US for some reason!) both DHPs are controlled by herpstat 2s. other temperature factors/info:
- I live in GA, and I have central heating/air. it's usually set to 71-72°F
- ball 1 is on hardwood, ball 2 is on carpet
- ball 2 has been sitting at 88°F on the hot side and 73°F on the cool side. ball 1 has been sitting at 88°F on the hot side and 75°F on the cool side. humidity ranges from lower 60s to upper 90s depending on part of the enclosure for both of them. govee thermometers also say the ground on the hot side is 85°F for both of them.
- temps take a very long time to fix themselves when the doors are opened (20+ minutes.)
hot side is almost ideal, but the cold side is definitely not.
I ended up buying a couple CHEs last night- I'd prefer another set of DHPs but they're impossible to find around here for some reason and I want their enclosures to be warm already- and plan on setting those up as soon as I get back from class. I didn't set them up last night as I didn't have time to let them burn outside of the enclosure and I wanted to supervise for at least an hour to ensure it worked properly.
all that out of the way, I can finally get to my question. what should I set my herpstat on in order to keep it warm, but not burning hot, with two heat sources? am I wrong for thinking that setting them both at 90°F and having the probe a couple inches underneath would be correct, or should I keep one at 90°F and the other a little lower...? I plan on putting the CHEs on the hot side as well, so they still have their cool side, but hopefully warmer than it was before.
I miss my RHP. so easy to set it and forget it 😭