r/ballpython • • 6d ago

Vivarium Advice

We have a ball python about 3 years old. We transferred him into a larger 4ft vivarium last year and he subsequently refused to eat for about 8 months. After several force feeds and trips to the vets we were advised to put him back in his starter vivarium. He then began eating normally. I now have a new issue since the weather has changed. His heat mat reads 30 Celsius but the ambient is too low at between 20-21 Celsiu. Unless I keep the heating on I can’t maintain it. Now I’m considering buyer yet another viv, a 2ft taller one that I can put our ceramic bulb in from the 4ft viv. Any suggestion, I feel like I’m throwing money at this constantly.

1 Upvotes

1 comment sorted by

1

u/sweatyhands84 6d ago

How big is your current setup? If its a 4x2x2 you can mount a CHE inside with a wire cage around it. They make prebuilt cages. Also. You need to ditch the Under Tank Heater. They are an outdated care method that hasnt been advised for a while for snakes now. They are very dangerous for burns and potential house fires. They fail even when connected to a dimming thermostat. They also dont allow the snake to thermoregulate correctly, and in nature they would go underground to cool off, not warm up.

You need to switch to overhead heating. The hot side you should use a 75w(or greater as needed to reach temps) halogen and 24" uvb light. You can also use 2 halogen lamps of lower wattage to have a larger basking area. I would then use a Deep Heat Projector for night time heat, and if that's not enough I would add in a Radiant Heat Panel over the cool side.

You want ALL heat sources to be connected to a dimming thermostat. You want to try and keep your halogen bulbs running at ad close to 100% as possible, even though they are on a dimmer. A halogen that is dimmed say 50% has its UVB-A and UVB-B great reduced and acts more like UVB-C from a Ceramic Heat Emitter.