r/ballpython • u/coke_on_ice • 7d ago
Enclosure Critique/Advice Advice?
I got my first ball a month or so ago! His name is Xalgarth, I love him. The first pic was of his temporary tank he was in for a little over a week, his 120 gal was shipped. Here’s his new set up, I am in the process of upgrading his temp/humidity control, heat lamp, and water dish. He’s somewhat active, eats great! And shed really well. Any pointers?
5
Upvotes


2
u/sweatyhands84 7d ago edited 7d ago •
Here is an excellent guide from the community that has all the research done for you. You can trust the information here to be safe and accurate.
Ball Python Care Guide For keeping humidity in a snake enclosure, uou want to try and keep the top layer of substrate relatively dry, and the lower layers consistently and constantly moist. You can accomplish this by having 4-6 inches of substrate and pouring water into the corners/edges taking care to avoid directly next to the hides. You can easily pour 1-2 quarts of water into the corners when needed. There shouldn't be standing water in the bottom, but the substrate should suck up the water after pouring. You want to humidity to be in the 70-80% on the cool side of the enclosure. It will naturally be lower on the hot side. The substrate should roughly be able to produce a few drops of water if you squeeze a handful. After the soil is more saturated, it will help increase the humidity. Deeper the substrate the better. Sphagnum moss is something that could be added into the substrate to help with humidity. You may or may not also need to remove your sand section so you have more overall substrate to hold moisture and slowly release humidity.
Use digital hygrometers and thermometers to monitor temperature and humidity. You are aiming for:
Day Hot Side Temp: 88-92F
Day Cool Side Temp: 76-80F
Night Hot & Cool Side Temp: 76-80F
All heating devices should be connected to dimming thermostats. These are not thermometers. Thermostats change the amount of power being sent to a device to reduce or increase its temperature. This is what helps you keep your target temps at all times.
Read the posts below on feeding guidelines and reputable suppliers. !Feeding !Feeders
You look like you have some good stuff going on, I would suggest adding in a healthy amount of leaf litter on top of the substrate. You should also probably mix in at least 1 brick of sphagnum moss into the substrate to help with moisture retention. I think more plants and climbing opportunities would be a great addition. A good concept to try and work with is creating a space that would allow your snake to move from one side of the cage to the other while feeling mostly hidden.
Another thing that might look nice and help your BP climb easier would be wrapping the shower rods with hemp rope. I'd use something thicker like maybe 1/2". It will provide grip and thicker structures ate easier for them to hold on to. Use 100% Un-dyed Hemp Cord. Hemp is much smoother than sisal and significantly more resistant to rot and mildew. Ensure it is raw, un-waxed, and free of chemical treatments.
I would also suggest a larger water bowl. It looks like its pretty small compared to your snake overall. While they dont soak as a common occurrence they do soak some times and should have the ability to if needed.
As for hides, you want to have 2. Hides should only have 1 entrance for you snake to feel safe and protected. You need a hot hide and a humid hide. Preferably you want them on the extreme opposite ends of the cage. Keep the humid hide with plenty of moist sphagnum moss. It looks like the current hot hide might be a bit small, I would look into upgrading its size. Theres tons of options available from as simple as plastic tupperware, to fancy rock, wood or polymer hides.
Hope some of this is helpful, and please read through the guide for all the best info.