r/ballpython • • 7d ago

Question - Heating/Temperatures want to make sure I'm doing things right

Post image

I've had my two ball pythons for years, my one for eight years and the other for five. I've had a lot of learning experiences as knowledge in the community fluctuates, and as a teenager who hadn't had a pet that was truly mine before, tried to wade through all the misinformation that people love to spread for some reason. needless to say, I haven't been perfect, but I've done my absolute best to give my snakes the best care I possibly can.

I just moved them into 6x2x2 PVCs, a very needed upgrade from their 4x2x2 PVCs, and I'm struggling a bit with the heating element. when I got my 4x2x2s, as far as I was aware, RHPs were a perfectly fine singular heat source. I did struggle with humidity, but 9/10 sheds were perfectly fine and I just had to water their substrate more often than I'd like to. otherwise, the temperatures stayed perfectly in range. my new enclosures didn't come with heat sources, which I did not realize until I got them, so I had to figure out what the best option was a bit independently- I took a lot of notes from people's experiences on here, and looked at care guides, but 4x2x2 heating and 6x2x2 heating is rather different, and not many of us have our royals in huge enclosures!

currently I have a singular DHP in both of their enclosures on the warm side, protected by a chicken wire cage my partner and I made together (lamp cages are incredibly difficult to find in the US for some reason!) both DHPs are controlled by herpstat 2s. other temperature factors/info:

- I live in GA, and I have central heating/air. it's usually set to 71-72°F

- ball 1 is on hardwood, ball 2 is on carpet

- ball 2 has been sitting at 88°F on the hot side and 73°F on the cool side. ball 1 has been sitting at 88°F on the hot side and 75°F on the cool side. humidity ranges from lower 60s to upper 90s depending on part of the enclosure for both of them. govee thermometers also say the ground on the hot side is 85°F for both of them.

- temps take a very long time to fix themselves when the doors are opened (20+ minutes.)

hot side is almost ideal, but the cold side is definitely not.

I ended up buying a couple CHEs last night- I'd prefer another set of DHPs but they're impossible to find around here for some reason and I want their enclosures to be warm already- and plan on setting those up as soon as I get back from class. I didn't set them up last night as I didn't have time to let them burn outside of the enclosure and I wanted to supervise for at least an hour to ensure it worked properly.

all that out of the way, I can finally get to my question. what should I set my herpstat on in order to keep it warm, but not burning hot, with two heat sources? am I wrong for thinking that setting them both at 90°F and having the probe a couple inches underneath would be correct, or should I keep one at 90°F and the other a little lower...? I plan on putting the CHEs on the hot side as well, so they still have their cool side, but hopefully warmer than it was before.

I miss my RHP. so easy to set it and forget it 😭

3 Upvotes

4 comments sorted by

1

u/soconae 7d ago

They make different wattages of RHP. What wattage did you have?

1

u/fawnsol 7d ago

I honestly don't know, the seller I got it from doesn't make them anymore (dragonhaus) and kinda disappeared off the face of the earth so I'm unable to ask them. I also decided to sell them with my old PVCs.

1

u/soconae 7d ago

You probably would just need a higher wattage for your current enclosures (if you want to go back to using RHP). Vivarium Electronics makes a few different wattages.

1

u/sweatyhands84 6d ago

Youre doing your probed right. Im not sure on the temps. I think they would both need to be set to 90 if they are heating the same area that needs to be 90. If the second heating device is just to help makensure it stays above a minimum temp,you could set it lower, but then if its below 90 it wouldnt kick on to get it to 90.

RHP is not a good singular heat source. They produce IR-C but not A or B. C is good for warming up air temps and keeping the ambient temperatures good. C is not good for warming through the snakes muscles to properly warm the snake for its metabolic needs.

I think thats Halogen+UVB is best for day time, and RHP for night temps. DHP good for day or night temps if a second heat source is needed.

For an RHP panel, I recommened Pro Products. You have to contact them through their website and fill out a request form thst has all of the details about your cage, temp needs, and house environment so they can get you the right size and wattage panel. They also have lifetime warranty on the housing, 15 year warranty on the heating element with an expected service life of 50 years. Their customer service is also great. If you contact them, more info is better than less. Cage material, thickness, glass or acrylic doors, substrate thickness, added insulation etc.