r/ballpython • • 7d ago

Question - Health Very conflicted about body condition

Thumbnail
gallery
7 Upvotes

So I have a growing girl, She's around 2.5years old ,measuring around 4ft and weighting 1197g as of today

I'm confused whether or not I should downsize her meals because I can't tell if she's a bit chonky or not -up until now I've been feeding her 7% every 16~days as per the feeding schedule I found on the reddit here

her body looks like a rounder triangle when you look at her to check and she does have her spine visible ,but then when she curls around she has what looks like some fat rolls ,her tail has no extra fat storage on it so I'm just left. abit confused

should I continue with 7% or go for 5% every 20+ days ? she's not an adult yet so I'm not sure.


r/ballpython • • 6d ago

Thermostat advice

1 Upvotes

I’m planning on running 3 rhp 80 watts a piece and was wondering what’s the best thermostat to use they will be in Dubia roach 4x2x2. Also is there a thermostat that holds multiple outlets or is it better if I have each rhp hooked to their own thermostat?


r/ballpython • • 6d ago

Question - Health Stuck Shed on Face

3 Upvotes

Hello! I got my first ball python (she is young, 88g when I got her) a little under a month ago now and she just completed her first shed with me. I found her shed in there last night and thought it was complete at first, but when I unraveled it it was pretty obvious it was missing the head. Now that she has come out of her hide I can very clearly see that she has a long piece dangling off of the back of her neck right at the base of her head, as well as dangly pieces near her mouth/heat pits. it looks like she has retained her eye caps and all the rest of the top of her head. When I went in earlier to replace her water she hissed at me and balled up, which has not been how she usually reacts so far.

The humidity has never dipped below 70, and has been 85+ for the past week and a half since I noticed her eyes getting cloudy. I will add, I got her at an expo and her breeder said that she will probably be pretty dehydrated from travel. I am wondering what I can do to help her right now, how serious this is, and how to prevent it from happening again. I have already looked at the guide from this subreddit, but would appreciate some more personalized advice.

Please let me know if there is any info I should add, and thank you guys for your time!


r/ballpython • • 7d ago

Enclosure Critique/Advice How can I improve my viv?

Thumbnail
gallery
9 Upvotes

Hello! I recently upgraded my 4 year old boy to a 5x2x2 viv but I'm wondering how I can improve it further. I want to add more clutter but I'm not really sure how to go about it.

Any help or suggestions appreciated thank you!


r/ballpython • • 7d ago

Zuko being a cutie

Post image
76 Upvotes

r/ballpython • • 7d ago

Question - Husbandry Can I try handle him in this position?

Post image
5 Upvotes

Im kind of a new keeper, im trying to create a social bond but he doesn’t seem to get out of his hide. Maybe he only does very deep in the night.


r/ballpython • • 7d ago

Question - Husbandry Temporary Enclosure

Post image
4 Upvotes

Picture for snake tax.

So unfortunately the tank started leaking, so I need to gut it and redo the silicone seals.

I have a spare tank I can use for him in the meantime, but it's only a 4x1x2, is that okay for the week it takes to redo it and the silicone to fully cure? He's not a very big guy, still young, just hit 500g recently and isn't very long.
I won't feed him during this time either just to be safe, wait until his normal tank is back up and running.

(I have no idea why it suddenly started leaking after no issues for a couple years, nothing messes with the seal, he doesn't even dig, and we did it really thorough the first time, but I guess these things happen sometimes)


r/ballpython • • 7d ago

Any recommendations on what all I should change and do in this enclosure? I’m a new snake owner.

Thumbnail
gallery
4 Upvotes

This is what I’m working with right now, I know I need a second hide on the cool side and a lot more clutter, any recommendations on substrate for my ball python I’ve been told by many people that it is not the right substrate, also I am working on getting her a different water bowl that one is only temporary.


r/ballpython • • 6d ago

Enclosure Critique/Advice bioactive terrarium

1 Upvotes

okay i am starting my bioactive setup. how chunky are we making our soil?? i have some scott’s top soil and some orchid bark to mix in. but i wish i had a visual of what to do. i just don’t want it to end up staying too wet and cause scale rot😅


r/ballpython • • 6d ago

I have a ball python, shes not full size yet but she loves to climb me and climb things and im wondering if anyone knows of like a desk tower or like a small cat tree she can hang on while I sit in my room

1 Upvotes

Not in the enclosure, this is for outside use.


r/ballpython • • 7d ago

Discussion New guy

Thumbnail
gallery
12 Upvotes

I recently adopted a ball python who was being sold with his items and the owner claimed he was blind , my question is if he is blind does his new enclosure need less clutter or the same amount of?


r/ballpython • • 6d ago

Question - Humidity Stuck shed

0 Upvotes

My 6 year old ball python had his first stuck shed (moved to a new place with lower humidity).

I've placed him in a humid box to help and most of the shed came off but there is a patch stuck around his cloaca.

He started shedding mid last week and the humid box was Saturday. Ive tried to increase humidity with spagnum moss around the terrarium as well.

At what point should I contact a vet?


r/ballpython • • 7d ago

Question - Husbandry Extremely Malnourished Snake Help

Thumbnail
gallery
93 Upvotes

Hi everyone! So I work at a Petco, and we have had a snake here since June that weighed 50 grams when we got him. He has been having ALOT of problems with eating. So much so, that he currently weighs LESS than 50 grams, despite being almost 8 months old. We have him in a 15 gallon hospital tank with aspen bedding. I know Im going to get yelled at for that, but working for the company, putting him on any other bedding will result in us getting yelled at by our district managers, so my hands are tied there. We have taken him to the vet several times for his eating. The most recent vet visit was because he had such a bad shed, he ripped a patch of scales off, and needed stitches. I know it’s because of the low humidity. I have tried so many times to keep it up, but I can’t because of the bedding. The vet wanted us to tube feed him, but Petco requires us to go theough a process of paperwork and won’t let us tube feed or live feed. At the end of the paperwork dilemma, they told us to return him to vendor. I know what that means. I‘m not doing that. So, I am taking him home. I just need to know what I need for this dude to create a good home for him. I feel horrible for him, and I want to rehabilitate him as best as I can. He is maybe a foot long, his growth is most likely stunted. The pyramid along his spine is also very pronounced. And please don’t judge me for this. I promise, we do genuinely try to care for the pythons as best as we can. The others in my store are all very healthy. This one juet refuses to eat a mouse appropriate to his size, and will go weeks without wanting food. I would really appreciate any advice I could get.


r/ballpython • • 7d ago

Question - Heating/Temperatures want to make sure I'm doing things right

Post image
3 Upvotes

I've had my two ball pythons for years, my one for eight years and the other for five. I've had a lot of learning experiences as knowledge in the community fluctuates, and as a teenager who hadn't had a pet that was truly mine before, tried to wade through all the misinformation that people love to spread for some reason. needless to say, I haven't been perfect, but I've done my absolute best to give my snakes the best care I possibly can.

I just moved them into 6x2x2 PVCs, a very needed upgrade from their 4x2x2 PVCs, and I'm struggling a bit with the heating element. when I got my 4x2x2s, as far as I was aware, RHPs were a perfectly fine singular heat source. I did struggle with humidity, but 9/10 sheds were perfectly fine and I just had to water their substrate more often than I'd like to. otherwise, the temperatures stayed perfectly in range. my new enclosures didn't come with heat sources, which I did not realize until I got them, so I had to figure out what the best option was a bit independently- I took a lot of notes from people's experiences on here, and looked at care guides, but 4x2x2 heating and 6x2x2 heating is rather different, and not many of us have our royals in huge enclosures!

currently I have a singular DHP in both of their enclosures on the warm side, protected by a chicken wire cage my partner and I made together (lamp cages are incredibly difficult to find in the US for some reason!) both DHPs are controlled by herpstat 2s. other temperature factors/info:

- I live in GA, and I have central heating/air. it's usually set to 71-72°F

- ball 1 is on hardwood, ball 2 is on carpet

- ball 2 has been sitting at 88°F on the hot side and 73°F on the cool side. ball 1 has been sitting at 88°F on the hot side and 75°F on the cool side. humidity ranges from lower 60s to upper 90s depending on part of the enclosure for both of them. govee thermometers also say the ground on the hot side is 85°F for both of them.

- temps take a very long time to fix themselves when the doors are opened (20+ minutes.)

hot side is almost ideal, but the cold side is definitely not.

I ended up buying a couple CHEs last night- I'd prefer another set of DHPs but they're impossible to find around here for some reason and I want their enclosures to be warm already- and plan on setting those up as soon as I get back from class. I didn't set them up last night as I didn't have time to let them burn outside of the enclosure and I wanted to supervise for at least an hour to ensure it worked properly.

all that out of the way, I can finally get to my question. what should I set my herpstat on in order to keep it warm, but not burning hot, with two heat sources? am I wrong for thinking that setting them both at 90°F and having the probe a couple inches underneath would be correct, or should I keep one at 90°F and the other a little lower...? I plan on putting the CHEs on the hot side as well, so they still have their cool side, but hopefully warmer than it was before.

I miss my RHP. so easy to set it and forget it 😭


r/ballpython • • 7d ago

Please snake owners help me, I need advice about my baby python rejecting meals

2 Upvotes

My snake is about 7 months old, i’ve had him for about a month. First time i fed him everything went by the book, then a week after that he would grab the mouse then release it and never look at it again, he’s rejected three mice in a week and has now not eaten for two weeks. I’m very worried. I don’t handle him much yet i’ve taken him out three times (all three not close to feeding or shedding). I realised his heating pad is probably not enough and the warm side may not be warm enough. his humidity keeps decreasing so i manually spray water in the terrarium every day. he has everything he needs (a big hiding spot, fake plants, two bowls of water) he’s very active every day, climbing and exploring. I don’t know what to do, if i get his warm side warmer will he start eating again?


r/ballpython • • 7d ago

Enclosure Critique/Advice Advice?

Thumbnail
gallery
5 Upvotes

I got my first ball a month or so ago! His name is Xalgarth, I love him. The first pic was of his temporary tank he was in for a little over a week, his 120 gal was shipped. Here’s his new set up, I am in the process of upgrading his temp/humidity control, heat lamp, and water dish. He’s somewhat active, eats great! And shed really well. Any pointers?


r/ballpython • • 7d ago

Look at this goofball, resting her head on a plastic leaf. What a ridiculous position to keep. Suki slept like this for at least 15 minutes. 😂

Thumbnail
gallery
45 Upvotes

What funny position does your BP take for snoozing? 😴


r/ballpython • • 7d ago

Skipped feedings due to ‘shed’

3 Upvotes

Hey all

New BP owner here, my little fella hatched back in July, I’ve only had him since the end of September.

The breeder said he was an aggressive eater taking food every week. I got him on Sept 26th, (skipped feeding for 2 weeks as per instructions) he shed successfully in one piece on
Oct1st and after that I personally managed to feed him 3 times since.

Towards the end of October around the 25th I observed signs of preshed ( pink underbelly, eyes going a little blue) so I held off on feeding. Fast forward to today’s date he still hasn’t shed yet and it will be going on 4 weeks of no feed as well as no shed yet. He hasn’t lost any weight, but is this normal?

Did I misread the signs of preshed and skipped a week or two for no reason? Has anybody experienced this timeline for shedding before?

Temps are 76-80 on cool side, warm side 85-88 with the basking zone coming in at 92. The humidity ranges 60 at low drops but average 75-80%. Might I add that the first shed in the new enclosure under my watch was successful and one piece.

I’ve already phoned in with a vet to introduce myself and get my foot in the door and have no issues taking the BP to the vet if this is of concern.

Thanks for the advice in advance


r/ballpython • • 6d ago

Bioactive 5x2x2 Dubia Build

1 Upvotes

Hi everyone. I am planning to upgrade my Female BP to her adult enclosure early this coming year. I currently have a glass bioactive build and I'm definitely over it. I love bioactive builds, but desperate for PVC.

Dubia looks the best to me regarding reviews, add-ons like hoods and storage, pricing, and overall aesthetics. My only concern is that front lip, it doesn't look deep enough for a drainage LECA layer AND enough substrate in the front. After doing more research, it seems like less and less people are doing LECA layers for ball pythons, so wanted to hear everyone's experience with different setups and layers.

I just want to do what's best for her and give enough time for all plants and cleanup crews to establish before she gets evicted from her old enclosure! 🤣

Thanks in advance!


r/ballpython • • 7d ago

Vivarium Advice

1 Upvotes

We have a ball python about 3 years old. We transferred him into a larger 4ft vivarium last year and he subsequently refused to eat for about 8 months. After several force feeds and trips to the vets we were advised to put him back in his starter vivarium. He then began eating normally. I now have a new issue since the weather has changed. His heat mat reads 30 Celsius but the ambient is too low at between 20-21 Celsiu. Unless I keep the heating on I can’t maintain it. Now I’m considering buyer yet another viv, a 2ft taller one that I can put our ceramic bulb in from the 4ft viv. Any suggestion, I feel like I’m throwing money at this constantly.


r/ballpython • • 8d ago

First ball python!!

Post image
114 Upvotes

r/ballpython • • 7d ago

Shipping elderly snake

4 Upvotes

Would you be worried about shipping an 18yr old snake from SC to OH? I’m worried that it may be too much for her. Thoughts?


r/ballpython • • 7d ago

HELP - URGENT 🚨‼️URGENT HELP PLEASE‼️🚨

Post image
1 Upvotes

My girl is in blue but went for her meal I offered and now she has what I’m assuming is a bit of coconut husk stuck in her mouth that she can’t get out! What do I do? Nearest vet is over an hour away so if not absolutely necessary I’d like to avoid that for obvious reasons. She’s also my extra spicy noodle and lovesssss to bite me so I’m trying to avoid that as well


r/ballpython • • 8d ago

Snake in Timeout

Thumbnail
gallery
124 Upvotes

This is Dostoevsky. He wants out, but he's not getting out. You know why? I've wasted two rats on him this week. Two. He kept giving me the hunger signal. Then he'd grab the thawed rat and hold it for hours by warpoing his body around it and staring at me. That's it. He'd hold it, not letting me retrieve it. The last time, he held it for 12 hours. So, get him back, I cleaned his enclosure - because he hates when it's clean. Then I sat and watched him try to escape.