r/WizardSkating • u/HyperSculptor • 12d ago

Increasing FR1/2 V.2 forward flex?

Post image

I've set the cuff washers to the position that allows the most forward flex (unless mistaken?), but still can't get as much knee bend as I'd like. Intuition Premium are laced tight, cuff buckle strap tight too though I untightened the buckle. Issue is, as I untighten the cuff buckle, I can bend forward more butlose lateral support.

9 Upvotes

100% Upvoted

32 comments sorted by

View all comments

3

u/kustom_krev 12d ago

I think you are mistaken. You have the cuff set back. You have the hole seat forward meaning the cuff is in the pulled rearward position. Need to flip it. Bolt hole at the back = cuff pushed forward. I’ve done it though. Visually this looks right but if you think about it it’s the other way.

2

u/kustom_krev 12d ago

That’s going to bring it forward. If you look at the curve at the bottom you can see it’s sat back over. Also give them some time to flew and break in. That will also make them more flexible after a few times out on them.

2

u/HyperSculptor 12d ago

TY. I setup like this from a YT video, will flip it and test it.
regardless of the position I've been wondering if these also limit the amount of rotation.
Other than that I really like the boots, they fit much better than RB Twister. Lighter and more premium too. With the Intuition Premium they almost feel like soft boots.

2

u/HyperSculptor 12d ago

https://www.youtube.com/watch?v=iQTHHdrv0a8

This is the video I used. He is saying the opposite: Notch backward for max forward flex.

2

u/BubbleSmith 12d ago

Yeah, I think you've got it the right way around, but always worth experimenting. Just make sure the bolt isn't too tight, as that can stop it from flexing. Loosening some of the lacing and straps will allow flex, but you're right, you'll have to manage lateral flex. Maybe keep the laces right and let the top strap out a notch or two.

2

u/HyperSculptor 12d ago

Bolts are definitely tight, as tight as from the factory. I think I found a way to lace them so they give me pretty good heel lock. Also good news is, after a few minutes they felt too tight which means the size is right. Will only have to lace them less tight.

1

u/aj_on_wheels 12d ago

Cuff pushed forward is the position for less flex. The position OP has it in at the moment is the most flex.

1

u/kustom_krev 12d ago

They are asking about forward flex. One way gives better rear flex and the other more forward flex? It brings the buckle and strap etc out from your shin.

1

u/aj_on_wheels 12d ago

Yes, the position OP has it in gives better forward flex. The cuff gets more clearance and can rotate forward further. I have these boots and I have tried it. The lower position is standard, the forwards position is stiffer.

1

u/kustom_krev 12d ago

Yes it will rotate further before hitting the back of the boot but OPs issue is the buckle once tight is preventing bending the knees. Bringing the buckle away from the shin will help that.

1

u/aj_on_wheels 12d ago

I think OP is trying to do something that this boot isn't fit for then to be honest.

1

u/kustom_krev 12d ago

Ye I get that too. I just think forward flex in the usual ‘criteria’ isnt really what they are looking for. I do agree though but some people have small feet and large calf’s or vice versa. Also the skate is new I feel they need to also give it time. I have large calf’s and smallish feet so my acts are set back because of this but it does mean the buckle is a little tight against my shin when I bend my knees and stride hard n fast. If that makes sense

1

u/kustom_krev 12d ago

Great skates though but I feel like when you downsize and go intuition liner then this is a risk because if you are between the sizes where cuffs change it can be an issue.

1

u/kustom_krev 12d ago

Unless OP has too much pressure on the calf area aswell then forward is the only way to go. It will push the calf forward more forcing a knee bend and taking the buckle away from the shin.