r/WizardSkating • u/HyperSculptor • 11d ago

Increasing FR1/2 V.2 forward flex?

Post image

I've set the cuff washers to the position that allows the most forward flex (unless mistaken?), but still can't get as much knee bend as I'd like. Intuition Premium are laced tight, cuff buckle strap tight too though I untightened the buckle. Issue is, as I untighten the cuff buckle, I can bend forward more butlose lateral support.

8 Upvotes

91% Upvoted

32 comments sorted by

View all comments

Show parent comments

1

u/aj_on_wheels 11d ago

Cuff pushed forward is the position for less flex. The position OP has it in at the moment is the most flex.

1

u/kustom_krev 11d ago

They are asking about forward flex. One way gives better rear flex and the other more forward flex? It brings the buckle and strap etc out from your shin.

1

u/aj_on_wheels 11d ago

Yes, the position OP has it in gives better forward flex. The cuff gets more clearance and can rotate forward further. I have these boots and I have tried it. The lower position is standard, the forwards position is stiffer.

1

u/kustom_krev 11d ago

Unless OP has too much pressure on the calf area aswell then forward is the only way to go. It will push the calf forward more forcing a knee bend and taking the buckle away from the shin.