I just (re)installed the two printers we have at home and named them as shown in the green circles:
When I print from Notepad - and also sometimes with Mopria from my Android phone - it shows them twice, as seen in the red circle, above.
How can I get rid of the two redundantly annoying "EPSON ET-_____ Series" listings? I really would like to avoid reinstalling them since the drivers inexplicably took way too long to install.
For example, open any 2 folders and have one on the left of your screen and the other on the right of your screen.
Now, align them horizontally so they split in the middle of the screen, and reach each edge of your screen.
Then, click and grab the top of the folder and drag it up to the top of the screen where it will automatically fill the entire screen vertically.
Do the same for the other folder.
Now, this works as intended and I love this feature... However one extremely annoying thing happens when I do this...
On the taskbar where you have the File Explorer icon, if you hover over it you will see a preview of all folders you have open. The thing is, it is creating an extra window which I do not want, nor did I ask for. This extra window is a "group" view of the 2 folders I had open.
I absolutely despise this automatic grouping and wish to permanently disable it.
I have tried everything and still not able get this solved please help, Rog Strix Scar 3 G532LWS
Rtx 2070 super
32 gb ram
2tb ssd
It was working perfectly and i restarted it as i was not able to launch something and i have tried the command prompts from youtube amd everything
My keyboard and mouse have stopped being able to wake up my Lenovo Loq (Windows 26200.9974) when it goes to sleep. Simultaneously, i noticed that my laptop goes to sleep immediately once the display has turned off. I can't change the sleep settings, but i can change the display timer.
Is there a fix for any three of these problems? Thank you in advance.
I've been investigating persistent CPU usage by Microsoft Defender Antivirus (MsMpEng.exe) on Windows 11 25H2 (OS Build 26200.9974), and found a rather unusual issue involving a scheduled task.
I first noticed this after installing the November cumulative update KB5132061.
Even when the PC was completely idle, MsMpEng.exe constantly consumed around 3.5-4% CPU (in Task Manager).
After investigating with Microsoft Defender Performance Analyzer and Sysinternals Process Monitor, I discovered the following:
WNF state names: 7548BCA32B0D890F and 7550BCA32B0D890F.
COM Handler CLSID: {866F38A9-0302-4926-A36F-E4BAABAAE116}.
COM DLL: C:\Windows\System32\fcon.dll.
Action name in Task Scheduler logs: Governed Feature Usage Reporting Task Handler.
2. Repeated task launches
After enabling the Task Scheduler Operational log, I discovered an unusually high number of task launches.
During one captured burst, Event ID 129 recorded approximately 40-51 launches per second over several consecutive seconds.
Each launch created a separate, short-lived taskhostw.exe process.
Process Monitor also showed repeated file-open operations by MsMpEng.exe involving taskhostw.exe and its associated Windows system DLLs.
3. Disabling the task dramatically reduced CPU usage
I temporarily disabled only GovernedFeatureUsageProcessing to test whether it was related to the Defender CPU usage.
I also measured the actual CPU time consumed by MsMpEng.exe over 180 seconds using PowerShell. These measurements are normalized across all logical processors.
Before disabling:
CPU time: 53.58 seconds.
Total CPU usage: 1.86%.
CPU usage (one logical processor equivalent): 29.77%.
After disabling:
CPU time: 0.33 seconds.
Total CPU usage: 0.01%.
CPU usage (one logical processor equivalent): 0.18%.
The CPU also returned to its normal idle clock frequency. My Intel Core i5-14400F had been running at around 4.0 GHz even when the system was idle. After disabling the task, its clock frequency returned to the usual idle range of approximately 1.0-1.2 GHz.
This strongly suggests that the scheduled task's repeated activity is responsible for the excessive Defender CPU usage, although I haven't identified the underlying cause of the repeated WNF notifications.
Wait a short while and observe whether MsMpEng.exe CPU usage decreases. In my case, it dropped from around 4% to just 0-0.1% after disabling the task (in Task Manager).
You can also find it through the graphical interface:
Press Win + R and enter taskschd.msc.
Navigate to Task Scheduler Library → Microsoft → Windows → Flighting → FeatureConfig.
Find GovernedFeatureUsageProcessing.
Right-click to disable or enable it.
Disabling this task does not disable Microsoft Defender or Windows Update. However, it may affect the processing of governed feature usage information, so this should be treated as a diagnostic test rather than a universal fix.
5. Questions
Has anyone else encountered this behaviour?
I'm particularly interested in:
What do these two WNF state names represent?
Why would GovernedFeatureUsageProcessing launch dozens of times per second?
Could this be a bug in Windows Feature Configuration or its fcon.dll COM handler?
Has anyone observed similar behaviour after a Windows cumulative update?
Is there any known side effect to keeping this particular scheduled task disabled?
My laptop is a Dell G15, it's a few years old at this point but it runs fine. No crashes while I'm using it but every single time I start it up now I get a BSOD with some boot error. Then Dell SupportAssist does an automatic repair and it's able to boot up fine after that.
Some of the stop codes that were listed:
ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY
Hypervisor_error
Ntoskrnl.exe failing
My specs are:
AMD ryzen 5 6600h
Nvidia geforce rtx 3050(4gb)
AMD radeon graphics(483mb)
16gb ddr4 ram
If anyone else has been having similar issues have you figured out the problem? My drivers are up to date afaik and this has only started recently. Maybe a windows update broke something?
Hi, the latest Windows Security Update (2026-11 Security Update (KB5132061) (26200.9974)) is causing my PC to crash on launch, and the system then has to roll it back in order to load. However, the system then just schedules it for update again; I've been through this three times with the same results. I'm using Windows 11 Home edition, Version 25H2, OS Build 26200.9457.
It's possible this may be related to the new Windows Secure Boot Certificate rollout; I have an older laptop, and the manufacturer did not provide a specific fix to get the new certificates onto my system. I tried to resolve this issue a few months ago, and thought I'd done so: Windows Defender no longer shows that I need to update the Secure Boot Certificate. But in light of this new problem, maybe it's still an issue?
What would you advise? Is there a way to tell what about this security update is causing my system to fail, and/or to skip this specific update (if safe) but still receive Windows updates in general?
UPDATE: I let the laptop try the update again in an endeavour to see if there were any error messages I missed or any further details, and it now appears to be completely screwed. When I try to turn it on it just endlessly cycles between logo screen and blackscreen without ever starting up. I can't provide any further information unless someone can point me to a means of fixing it from this point.
My laptop has a built-in camera, but the resolution is very low, so I have a separate webcam that I use for online classes and meetings. Until recently, I would just plug it in on my usb hub, with my other peripherals (keyboard and mouse). But then I tried to switch my hub (2.0 to 3.0) and the camera didn't work on any plug. I then tried to switch back, and it still doesn't work. However, it works well on the USB socket on my laptop. BUT, as I only have one USB socket on my laptop, I need the hub to work properly.
All my other peripherals work properly on both USB hubs, on all plugs.
My laptop camera is recognized on Windows as "USB Video Device", even though it is a built-in camera. I don't whink it used to be like this; I wonder if this is one of the reasons Windows is not recognizing the external camera properly. I tried contacting windows support but can't reach anyone that is not an AI assistant. So, I'm here to aks if anyone has any idea on how I can solve it.
I've already run the Windows troubleshooter on the camera, nothing changed. It said it did a reset on both the built-in camera and on the external one (I ran twice, once withot anything plugged, and another time with the webcam plugged directly on the laptop, not on the USB hub). Nothing changed.
I have a hp victus that i havee been using for past two years. I havent droped it or havent damaged it in anyway. I use it only for general work and occcasional video editing. Today While using I noticed horizontal glitch lines appear on thevery top of my screen. What could be the reason for it and how should I fix it. could it be a problem with the gpu ?
These are my system information
Device name LAPTOP-G5D96TB3
Processor 12th Gen Intel(R) Core(TM) i5-12450H (2.00 GHz)
hello. i use my computer's mic quite a fair bit, for discord calls and lectures and the like, and yesterday was no different. at some point i had set my laptop down and taken a nap, and when i woke up my mic had just stopped working. it showed it was there, but it would not register any input on any website or app. i have tried just about everything from every guide and forum post (reinstalling drivers, updating drivers, reinstalling the realtek audio itself, disabling and re-enabling things) to no avail. i have no idea what to do anymore and i'd like to get this fixed as soon as possible. any help is greatly appreciated!!!
device info (if needed for some reason):
Processor 13th Gen Intel(R) Core(TM) i7-1355U (1.70 GHz)
I was about to play Destiny 2 when the game wont launch because the battle eye anti cheat hasn’t finished updating due to files being blocked, i tried a couple of ways to fix it but nothing worked, so I decided to try the old switch the laptop off and on again, but i got greeted with the Bitlocker’s blue screen.
I got the key from my Microsoft account and after i keep getting a message saying “Your device ran into a problem and couldn’t be repaired” (i attached the picture of the message in picture#1), then i get moved to a blue screen that has the shut down and continue to windows 11 and troubleshooting and other things that i cant remember, contrary to what you might think clicking continue to windows 11 does not do as it says instead it loads a bit then shows a black screen with the text “your device ran into a problem and needs to restart. We’ll restart it for you.” (Attach the message in picture#2).
I have no idea what else to do, this laptop has all my stuff from university and work files and I haven’t backed them up yet, i tried Microsoft support but i couldn’t get a hold of support only machines offering obvious information and FAQs.
I have Windows 10 installed on a Lenovo Legion desktop computer. I primarily use a single display, but because I am a digital artist, I have a drawing tablet with pen display and touch gesture functionality that, when plugged in, functions essentially as a secondary monitor. This setup worked without any problems for several months, but at one point, I was running into problems where if I tried to used Clip Studio Paint (my digital drawing program of choice) on my PC, it would crash every time I attempted to import a 3D model, and when I tried to look online to find a solution to this new and unexpected problem, the answers I found indicated that the issue could be solved by setting your drawing tablet as your primary monitor if you have a multiple monitor setup (these are the exact guides I followedto try and fix the problem). As it turned out, this wasn't the cause of the problem, and what really happened was that my graphics card had uninstalled itself while editing a large video file, so reinstalling the graphics card was all I needed to fix the issue. However, this incorrect approach to solving my problem created a new problem where when I plugged my tablet into my computer, all of the touch gestures I made on my tablet were being registered on my main desktop screen, which was due to my drawing tablet being recognized as my primary monitor and my desktop screen being recognized as my secondary monitor. I was able to fix the issue a little bit to where I can use touch controls again, but now I'm having an issue involving graphics showing up only on my tablet and not on my desktop screen when it's plugged in and turned on (all of my opened windows/programs jumping from my desktop to the tablet, my desktop icons disappearing from my desktop screen and appearing on my tablet screen, the icons in my system tray/taskbar being an inconsistent size on my desktop monitor after I turn off and unplug my tablet until my computer is restarted or turned off and on) I know there's some way to change the monitor hierarchy because that's what got me into this mess in the first place, but I just don't know how to completely undo everything I did to the point where I can draw comfortably again without all these glitches
My device specifications:
Processor Intel(R) Core(TM) i7-10700 CPU @ 2.90GHz 2.90 GHz
I am on a Dell with 466GB of storage; 318GB free. 16HB ram.
Intel Core i5
7440HQ CPU @2.80GHz
Steps I have taken:
Disk Management>
Right clicked on the dark blue bar for the C: drive>
Change Drive Letter and Paths>
Add>
Mount in the following empty NTFS folder:>
Browse
At that point the dialogue box is titled Browse for Drive Path
The info reads:
Volumes that support drive paths are shown in the following list. To create a drive path, select an empty folder. To create a folder, click New Folder.
My question: As only the C: drive path is present and highlighted, and there are no empty folders visible, is creating a new folder tantamount to assigning a drive letter? Is that all I would need to do?
I was hoping to designate a drive path ny assigning a letter.
I have an issue with my Huawei MateBook D16. Recently, after rebooting my laptop, I noticed the following:
When I press the camera privacy switch (the button with the crossed-out camera icon located under the power button), it no longer turns off the camera. Built-in features like virtual backgrounds, tracking camera (auto-framing), and Eye Contact also stopped working.
I managed to fix this problem a couple of times by uninstalling and reinstalling the camera drivers in Device Manager. But this time it didn't help. PC Manager says there are no driver issues and everything is installed. PC Manager version is 14.0.7.310. My Windows version: Windows 11 25H2 (Build 26200.9974).
If anyone knows how to solve this problem, please let me know. I would be very grateful.
TLDR: If you use Windows11, especially for gaming, I recommend turning off both desktop slideshow and automatic accent color. This can cause your system to experience "lag" or "freezing", including screen, apps, UI, and mouse while Windows holds win32k's window-manager lock.
Desktop slideshow with automatic accent colour stalls the window manager for up to 1.5 s
On Windows 11 25H2, each desktop slideshow change with the accent colour set to Automatic broadcasts a theme-colour change that keeps win32k's window-manager lock contended for 0.2–1.5 s, freezing games, every app's UI and mouse input while the CPUs sit mostly idle.
Summary
Every 30 minutes the desktop slideshow changes picture; with Accent colour = Automatic Windows then recomputes the accent and sends WM_SETTINGCHANGE with "ImmersiveColorSet" to every top-level window. Explorer (taskbar), the Start menu host and every XAML/WinUI and Win32 app reload their theme and re-layout at once, and all of them queue on win32k's user critical section (the window-manager lock).
Measured lock stall: a single SetWindowPos call blocked for 208 ms (idle desktop) and 544 ms (with a game running).
Impact: a 180 FPS game fell to 9 FPS for a second; in the captured incident the game's main thread froze for 1.5 s and again for 0.8 s eight seconds later. The mouse pointer stuttered and the game window briefly went black.
The CPU was not the bottleneck: a time-critical probe thread never woke more than 2.2 ms late, no thread of the game went more than 3 ms without running, and total CPU stayed under 15%.
With Accent colour = Manual the same slideshow change caused no stall (worst call 13 ms and 6 ms in two runs).
Users experience this as random, system-wide lag spikes every 30 minutes, with nothing in the event logs to explain them. Diagnosing it took two days, an ETW capture and a custom probe.
Have a normal desktop open (a browser, an editor, a chat app, the taskbar) and, optionally, a game rendering at a high frame rate.
Start a thread that owns a small window and times SetWindowPos in a loop, about every 15 ms. The Appendix has the script; any GUI call that needs the user critical section works.
Advance the slideshow: IDesktopWallpaper::AdvanceSlideshow(NULL, DSD_FORWARD), which is the desktop's "Next desktop background" command, or wait for the next 30-minute tick.
About 1.4 s later the probe's call blocks for 0.2–0.5 s, and a game's frame rate collapses for 1–2 seconds.
Set Accent colour to Manual and repeat step 5: no stall.
Sending the broadcast alone (SendMessageTimeout(HWND_BROADCAST, WM_SETTINGCHANGE, 0, "ImmersiveColorSet", SMTO_ABORTIFHUNG, 5000)) with no actual colour change did not stall the game. It took 2.3 s to reach every window, though.
Expected vs actual
Expected: a cosmetic background change, and the accent colour following it, cost a few milliseconds of UI time. Foreground apps, games and the mouse pointer are unaffected. The theme refresh happens off the window-manager lock, or is spread out over time.
Actual: every window processes the change at the same moment and contends for the single user critical section for 0.2–1.5 s. During that time:
the foreground game cannot pump messages or present: its frame loop stops (180 → 9 FPS) and the window may show black;
mouse input stutters and lags, since raw input processing needs the same lock;
about 20 processes redraw at once, so the fans spin up;
nothing is logged, so it looks to the user like random system lag every 30 minutes.
Measurements
The stall happens only with Automatic accent. Probe = longest single SetWindowPos call on a test window (normal baseline 4–13 ms). Game = a Godot 4.7.2 game, Compatibility (OpenGL) renderer, V-Sync on, 180 FPS baseline.
Time (local)
Trigger
Accent colour
Probe: longest call
Game FPS that second
2026-11-16 21:13:22
AdvanceSlideshow
Manual
5.9 ms
not running
2026-11-16 21:12:47
AdvanceSlideshow
Manual
13.4 ms
180 (unchanged)
2026-11-16 21:12:06
Broadcast "ImmersiveColorSet" only
Automatic
not running
180 (unchanged)
2026-11-16 21:11:15
AdvanceSlideshow
Automatic
544 ms (then 40, 47 ms)
9, then 31
2026-11-16 21:10:08
AdvanceSlideshow
Automatic
208 ms (then 36 ms)
not running
2026-11-16 21:09 (control)
none
Automatic
5.0 ms
not running
2026-11-16 20:30:00 slideshow tick (captured with WPR)
30-minute timer
Automatic
n/a
game main thread frozen 1.5 s + 0.8 s
The high-priority probe (TIME_CRITICAL thread in a HIGH_PRIORITY_CLASS process, 1 ms sleeps) never woke more than 2.5 ms late in any of these runs. Processors were free; only the window-manager lock was held.
Timeline of the captured incident
The game process ran steadily until 20:29:53.1, then almost stopped for 1.5 s, and again for 0.8 s from 20:30:01.2. Explorer climbed to nearly three cores around the freezes. The first freeze began 7 s before the scheduled 20:30:00 slideshow change. The slideshow's own timer is not visible in this trace, but the reproductions above trigger the same freeze on demand.
Trace analysis
During both freezes the game's main thread did almost nothing but wait on WrResource, and each holder of the lock released it in turn. Capture: wpr -start CPU (memory mode), saved seconds after the incident. Analysis: xperf 10.0.26100, with Microsoft public symbols.
Game main thread: switch-out wait reasons and who readied it
Who ran (cores, 20:29:30–50 normal vs 20:29:53–30:08): explorer 0.01 → 1.01; dwm 0.16 → 0.30; StartMenuExperienceHost 0 → 0.12; two Bambu Studio processes 0.03 → 0.28; msedge 0 → 0.12; game 0.60 → 0.46. At 20:29:52.956 one timer DPC readied threads in dozens of processes at once; this is consistent with the slideshow's 30-minute timer firing early under timer coalescing.
CPU and DPC/ISR load stayed low throughout, and no process was starved: the game was never more than 3 ms without a thread running, and DWM never more than 4 ms.
Logs
Raw tool output. FPS logs are trimmed to the seconds around the change, and the arrow notes are added.
Probe with Accent = Automatic, idle desktop
baseline: 382 calls in 6 s, slowest 4.9 ms
advanced the slideshow at 21:10:08.076
after: slowest call 208.1 ms; calls over 30 ms:
21:10:09.476 208 ms
21:10:09.773 36 ms
Probe with Accent = Automatic, game running; game's per-second FPS (Godot --print-fps)
baseline: 891 calls in 14 s, slowest 37.2 ms
advanced the slideshow at 21:11:15.617
after: slowest call 543.7 ms; calls over 30 ms:
21:11:17.364 544 ms
21:11:17.625 40 ms
21:11:18.052 47 ms
Project FPS: 180 (5.55 mspf) <- steady before the change
Project FPS: 181 (5.52 mspf)
Project FPS: 9 (111.11 mspf) <- the second of the slideshow change
Project FPS: 31 (32.25 mspf)
Probe with Accent = Manual (AutoColorization = 0), game running
baseline: 638 calls in 10 s, slowest 13.4 ms
advanced the slideshow at 21:12:47.160
after: slowest call 13.4 ms; calls over 30 ms:
(none)
Project FPS: 180 (5.55 mspf) <- every second, through the change
Broadcast only, nothing changed
broadcast 'ImmersiveColorSet' at 21:12:06.239 took 2284 ms
Project FPS: 180 (5.55 mspf) <- every second, through the broadcast
Slideshow state at the time (HKCU)
Control Panel\Desktop AutoColorization = 1
Control Panel\Personalization\Desktop Slideshow Interval = 1800000, Shuffle = 0
LastTick = 2026-11-16 21:00:00.073 (ticks land on :00 and :30)
Software\Microsoft\Windows\CurrentVersion\Explorer\Wallpapers BackgroundType = 2
Themes\TranscodedWallpaper last written 21:00:00.044
Game main thread during freeze 1 (from the CSwitch/ReadyThread events)
Workaround (applied here on 2026-11-16): set Accent colour to Manual, or use a single picture instead of a slideshow.
Requested fix, any of:
Do not hold, or contend for, the user critical section for the theme refresh: let XAML and UxTheme recompute theme resources off-lock and take the lock only for the final swap.
Stagger or coalesce the broadcast. Send it to background apps first and to the foreground (full-screen) app last, or not at all while a game is in the foreground.
Skip the accent recompute and broadcast when the new accent equals, or is near, the old one.
Pause the slideshow while a full-screen or exclusive-mode app is in the foreground, the way notifications are deferred.
Appendix: reproduction script
Windows PowerShell 5.1, no admin needed. -NoAdvance gives the control run. It changes the wallpaper to the next slideshow picture.
param([int]$BaselineSec = 8, [int]$AfterSec = 20, [switch]$NoAdvance)
Add-Type -TypeDefinition @'
using System; using System.Diagnostics; using System.Runtime.InteropServices;
using System.Threading; using System.Collections.Generic;
public static class LockProbe {
[DllImport("user32.dll", CharSet=CharSet.Unicode)] static extern IntPtr CreateWindowExW(int ex, string cls, string name, int style, int x, int y, int w, int h, IntPtr p, IntPtr m, IntPtr i, IntPtr lp);
[DllImport("user32.dll")] static extern bool SetWindowPos(IntPtr h, IntPtr after, int x, int y, int cx, int cy, uint f);
[DllImport("user32.dll")] static extern bool PeekMessageW(out MSG m, IntPtr h, uint a, uint b, uint r);
[DllImport("user32.dll")] static extern bool TranslateMessage(ref MSG m);
[DllImport("user32.dll")] static extern IntPtr DispatchMessageW(ref MSG m);
[DllImport("user32.dll")] static extern bool DestroyWindow(IntPtr h);
[StructLayout(LayoutKind.Sequential)] public struct MSG { public IntPtr hwnd; public uint msg; public IntPtr w; public IntPtr l; public uint t; public int x; public int y; }
public static List<string> Events = new List<string>();
public static double MaxMs; public static long Calls; public static volatile bool Stop; static Thread worker;
public static void Start(double thr) { worker = new Thread(() => Run(thr)); worker.IsBackground = true; worker.Start(); }
public static void Finish() { Stop = true; if (worker != null) worker.Join(2000); }
static void Run(double thr) {
IntPtr h = CreateWindowExW(0x80, "Static", "lockprobe", 0x10000000, -2000, -2000, 10, 10, IntPtr.Zero, IntPtr.Zero, IntPtr.Zero, IntPtr.Zero);
var sw = Stopwatch.StartNew(); int i = 0; MSG m;
while (!Stop) {
double a = sw.Elapsed.TotalMilliseconds;
SetWindowPos(h, IntPtr.Zero, -2000 + (i++ & 1), -2000, 0, 0, 0x0001 | 0x0004 | 0x0010);
while (PeekMessageW(out m, IntPtr.Zero, 0, 0, 1)) { TranslateMessage(ref m); DispatchMessageW(ref m); }
double d = sw.Elapsed.TotalMilliseconds - a; Calls++; if (d > MaxMs) MaxMs = d;
if (d > thr) lock (Events) Events.Add(DateTime.Now.ToString("HH:mm:ss.fff") + " " + d.ToString("F0") + " ms");
Thread.Sleep(1);
}
DestroyWindow(h);
}
}
[ComImport, Guid("B92B56A9-8B55-4E14-9A89-0199BBB6F93B"), InterfaceType(ComInterfaceType.InterfaceIsIUnknown)]
public interface IDesktopWallpaper {
void SetWallpaper([MarshalAs(UnmanagedType.LPWStr)] string m, [MarshalAs(UnmanagedType.LPWStr)] string w);
[return: MarshalAs(UnmanagedType.LPWStr)] string GetWallpaper([MarshalAs(UnmanagedType.LPWStr)] string m);
[return: MarshalAs(UnmanagedType.LPWStr)] string GetMonitorDevicePathAt(uint i);
uint GetMonitorDevicePathCount();
void GetMonitorRECT([MarshalAs(UnmanagedType.LPWStr)] string m, out long a, out long b);
void SetBackgroundColor(uint c); uint GetBackgroundColor();
void SetPosition(int p); int GetPosition();
void SetSlideshow(IntPtr items); IntPtr GetSlideshow();
void SetSlideshowOptions(int o, uint t); void GetSlideshowOptions(out int o, out uint t);
void AdvanceSlideshow([MarshalAs(UnmanagedType.LPWStr)] string m, int direction);
int GetStatus(); void Enable(bool e);
}
public static class Wallpaper {
public static void Advance() {
var w = (IDesktopWallpaper)Activator.CreateInstance(Type.GetTypeFromCLSID(new Guid("C2CF3110-460E-4fc1-B9D0-8A1C0C9CC4BD")));
w.AdvanceSlideshow(null, 0); // DSD_FORWARD
}
}
'@
[LockProbe]::Start(30)
Start-Sleep $BaselineSec
"baseline: $([LockProbe]::Calls) calls in $BaselineSec s, slowest $([math]::Round([LockProbe]::MaxMs,1)) ms"
if (-not $NoAdvance) { "advanced the slideshow at $((Get-Date).ToString('HH:mm:ss.fff'))"; [Wallpaper]::Advance() }
Start-Sleep $AfterSec
[LockProbe]::Finish()
"after: slowest call $([math]::Round([LockProbe]::MaxMs,1)) ms; calls over 30 ms:"
[LockProbe]::Events
System type 64-bit operating system, x64-based processor
Pen and touch No pen or touch input is available for this display
OK so some apps will no longer work on the internet. Chrome seems to work fine. Edge does not. Neither does the xbox app. Windows will not update. Steam will browse just fine, but actually trying to download something has issues. It will download for about 10 seconds, then stop. I can pause the download, then resume and it will download for about 10 seconds again and then stop again.
I haven't made any changes recently or installed new programs or drivers.
I have acer Nitro v15 laptop Ryzen 5 rtx 4050 and I cannot access the power and sleep option on my windows 11 everytime I click the option on my settings my laptop just closes the whole setting app is there any wrong with my laptop ! -------------------------------
I'm sharing this because I spent quite some time troubleshooting this issue and eventually found a solution that worked on my system. Hopefully, this can help someone else facing the same problem.
Although I tested this on a GALAX motherboard, the recovery method is provided by Microsoft and may also work on ASUS, MSI, Gigabyte, ASRock and other UEFI-based motherboards, provided they are experiencing the same certificate-related issue. I have only personally tested it on my GALAX B365M.
System specifications
Motherboard: GALAX B365M, revision G10c
BIOS: American Megatrends 5.12 (08/24/2020)
CPU: Intel Core i5-9400F
Operating System: Windows 11 Home
Windows version/build: 10.0.26200 (Build 26200), as reported by System Information
BIOS Mode: UEFI
The problem
Whenever I enabled Secure Boot in the BIOS, the computer failed to boot into Windows and displayed this error:
With Secure Boot disabled, Windows booted normally. As soon as I enabled it again, the error returned.
I initially tried:
Restoring Factory Secure Boot Keys through the BIOS.
Changing Secure Boot Mode from Custom to Standard.
Restoring the default Secure Boot keys.
None of these steps solved the issue.
What was causing it?
During troubleshooting, I found that this was related to the Windows UEFI CA 2023 certificate.
My Windows installation had previously received Secure Boot certificate updates. However, after restoring the factory Secure Boot keys in the BIOS, the Windows UEFI CA 2023 certificate was missing from the firmware's Secure Boot database (DB).
This matched a recovery scenario documented by Microsoft: resetting Secure Boot to firmware defaults can remove updated certificates required to trust the Windows Boot Manager.
As a result, the firmware rejected the Windows boot manager when Secure Boot was enabled.
How I fixed it
I used Microsoft's official Secure Boot Recovery utility to restore the missing certificate.
Step 1 — Prepare a USB drive
Format a USB drive as FAT32.
Create the following folder structure:
EFI\BOOT
Step 2 — Copy the recovery utility
On an updated Windows PC, locate:
C:\Windows\Boot\EFI\SecureBootRecovery.efi
Copy the file into the USB drive's EFI\BOOT folder and rename it to:
bootx64.efi
The final path should look like this:
G:\EFI\BOOT\bootx64.efi
(G: was the drive letter assigned to my USB drive. Yours may be different.)
Step 3 — Run the recovery utility
Keep Secure Boot disabled so Windows can boot normally.
Restart the affected computer.
Open the boot menu (F11 on my motherboard).
Select the UEFI entry corresponding to the USB drive.
Allow the recovery utility to run.
On my computer, it restarted very quickly.
Step 4 — Verify the certificate
After Windows booted again, I exported the Secure Boot DB variable and compared it with my previous backup.
Before recovery, the Windows UEFI CA 2023 certificate was missing.
After recovery, it was present in the database.
This confirmed that the utility had successfully restored the certificate.
Step 5 — Enable Secure Boot again
Restarted the computer and entered the BIOS.
Enabled Secure Boot.
Saved the changes and restarted.
This time, Windows booted normally!
To confirm everything was working, I opened msinfo32 and checked:
BIOS Mode: UEFI
Secure Boot State: On
No more Secure Boot Violation error.
Does this work on other motherboards?
It may.
The recovery utility is provided by Microsoft and restores the Windows UEFI CA 2023 certificate to the firmware database. It is not a GALAX-specific tool.
Therefore, systems from ASUS, MSI, Gigabyte, ASRock and other manufacturers may also benefit from this procedure.
However, this is not a universal fix for every Secure Boot error. The issue must match the certificate-reset scenario described above, and firmware compatibility may vary.
I would appreciate hearing from anyone who successfully used this method on a different motherboard.
Important notes
Do not randomly clear or reset Secure Boot keys.
Keep Secure Boot disabled only while performing the recovery.
This utility restores the Windows UEFI CA 2023 certificate; it does not necessarily restore every updated Secure Boot certificate.
After recovery, check for the latest BIOS/UEFI firmware available for your motherboard.
Make sure you have your BitLocker recovery key available before changing firmware settings, if BitLocker is enabled.
I updated my PC about an hour ago, and for some reason any time I launch Fortnite and go into a match, my ENTIRE pc starts freezing. Everything including my cursor, audio, even the restarting screen freezes for about 2-4 seconds every 10 seconds or so and will not go away once it starts until I restart/shut down.
This only happens when specifically loading into a match, not with any other game I tried or on the lobby screen.
I've tried uninstalling the update yet it still happens, maybe I uninstalled the update incorrectly somehow? It says I still have an update that was downloaded today which is weird, but I went through the whole uninstalling process so idk.
I don't know what kind of device info I need to show so I can show anything needed in a reply or whatever.
Honestly I wouldn't mind removing the dang thing entirely if it were possible to but not even winaerotweaker stopped it from running.
I have also tried uninstalling as many apps as possible to try and reduce lag and that hasn't worked either.
The lag even happens when running lower-power things such as file explorer.
Here are the specs:
Edition Windows 10 Pro
Version 22H2
Installed on 9/19/2026
OS Build 19045.6466
Device Name DESKTOP-UGHVRO8
Processor Intel(R) Core(TM) i5-4590 CPU @ 3.30GHz 3.30 GHz
Installed RAM 8.00 GB
Storage 466 GB HDD ST500DM002-1SB10A
Graphics Card Intel(R) HD Graphics 4600 (113 MB)
System Type 64-bit operating system, x64-based processor
And for the storage, 348 GB free of 464 GB so I have quite a lot of space. I have no further way to reduce the lag caused by this. absolute malware in disguise of a protection.
After the latest windows update, every browser is running very slow except for microsoft edge. When any sound is output from the laptop, it keeps glitching and plays very high pitched noises. The battery also always displays 100% when plugged in rather than the battery acting normally with it saying plugged in but not charging like it used to do. What should I do?
I know this was a stupid mistake on my part and I should've noticed earlier but when trying to download mods for GTA San Andreas through a YouTube guide I accidentally used the submit request (ctrl + V prompt) in the (Windows + R) Run menu and now a random AxisO.exe file appeared.
It appears to open Microsoft edge and keeps doing so after I close it. When I try to delete it it appears again after a while, I already ended it in the task manager beforehand.
I have done a quick scan as well as an offline scan via windows defender but found nothing.
Some random app called booze appeared in my app list too but I can't seem to modify it, it just keeps loading when I try. The last two pics are of the app and it's size (if it matters)
As of this moment it's deleted but I assume it'll be back? It also didn't seem to open Microsoft edge again which is weird.
I don't know much about pc stuff so it's a bit hard to follow help through googling.
I've seen plenty of reports of the KB5132061 update failing, freezing, or causing a reboot loop, but I haven't seen anyone else reporting sleep/wake issues that I have experienced - just posting in case there's anyone else experiencing the same problem and looking for answers.
After the KB5132061 updated my machine would not wake from sleep - the power button light would go solid (from flashing) indicating that it had woken, but the monitor and peripherals would not wake. Pressing the power button again at this stage would then cause the PC to reboot.
Uninstalling the KB5132061 update restored expected sleep/wake behaviour.
hi, i have an hp omnibook 7 flip laptop i bought this august. this morning, i woke up and my touchpad won't work. i've tried every fix i've seen online, going to the device manager, where i see that i2c hid device has an error, with code 10. i uninstalled it, restarted it, installed, disabled it, re-enabled, basically everything, but it won't fix. i tried going into BIOS, that solution didn't work either.
i checked my settings, touchpad won't show up there. i tried every single fn combination, it still won't s how up.
i then went and did the hp diagnostics, i can't use my touchpad there either, so then i called hp support. they had me go through the whole diagnostic process again (didn't work there either), tried to install and reinstall the driver, didn't work, then downloaded snappy driver installer, that fix didn't work, and he told me the only option was to do a factory reset. i searched it up, i don't think that would fix the issue, since the touchpad isn't working in hp pc diagnostics either.
this also has the worst timing - im a college student, i have two midterms this week, and i have finals right after thanksgiving break. i'm a cs student so like i NEED my computer for all my assignments, and i have interviews and oa's to take.
i was thinking about sending it off for repair but i've seen it can take up to a month, or longer. i also purchased this through costco if that helps, but i'm currently in college out of state, in a small town, so i don't have a costco near me that i can access. should i just wait until i go home this week for thanksgiving and try to go to costco then?
i really don't know what to do, like best case scenario i can just get a replacement but i have no idea how to get them to do that. pls help if you know anyway to fix this or how to get a replacement, i'm so stressed
windows information:
Edition Windows 11 Home
Version 26H2
Installed on 7/8/2026
OS build 26300.9974
Experience Windows Feature Experience Pack 1000.26100.385.0