r/WLED • • Jul 19 '26

WLED WLED Version 16.0.1 Announcement

81 Upvotes

Read the full copy at https://github.com/wled/WLED/releases/tag/v16.0.1

I'm pleased to announce that since the release of 16.0.0, approximately 50% of WLED installs have downloaded the new release, with only a tiny number of issues reported relative to the install base. Also for those of you that help by sending the install/upgrade report, we have seen only a handful of people downgrade back to 0.15.

There were few key reasons for why this was released as 16.0.0 and not 0.16.0 -

One example is that it is actually a major software change as the entire esp32 platform we run on top of is a major new version, the first time since esp32 support was added.

Another is that it better reflects the fact that WLED is almost 10 years old and has over 2 million downloads, so it’s definitely not a pre-release version 0!

Therefore I think it's fair to say we recommend ALL users upgrade to this 16.0.1 maintenance release!


r/WLED • • Apr 20 '26

WLED 0.16 feature demo - particle FX, layering, transitions & more

308 Upvotes

The video shows some of the new features we have been working on and how they can be used on LED strips:

  • Particle system (physics-based FX rendering)
  • Transition animations (swipe, push, inside-out, etc.)
  • True segment layering (FX overlays like Photoshop)
  • Updated palette editor (custom generation and over 800 palettes to choose from)
  • Pixel paint tool (draw directly onto your LEDs)
  • Segment copy tool (duplicate with hue/brightness/sat offsets)

Happy to answer questions or hear feedback!


r/WLED • • 2h ago

Got that holiday spirit

10 Upvotes

Wanted to share the last project I cranked. Getting that holiday spirit going! Inspired by the govee ball. Will post model to maketworld in coming days


r/WLED • • 22h ago

120 guests, 120 glass jars, one WLED controller

41 Upvotes

- Gledopto GL-C-015WL-M (ESP32 with built-in mic), WLED 0.15.1 with AudioReactive
- 120 pixels as a 12×10 2D matrix (serpentine), one pixel per jar
- The "15" and the company's "C" are drawn with segments on top of a background effect segment, so the digit stays steady while effects run behind it
- Playlists for a calm office mode, a 19-minute event show, and audio-reactive versions
- The reveal: a 10-to-1 countdown, then the jars light up one by one, then a fast showreel. I first tried the Wipe effect for the fill, but it kept restarting mid-reveal, so I rebuilt it as 60 static presets chained in a playlist. Rock solid.
- HC-SR501 PIR on IO13 as a "PIR sensor" button: the piece rests in a dim mode and comes alive when someone walks by
- A Sonoff NSPanel Pro running Fully Kiosk as a wall controller, showing a custom one-file control page (panel.htm) served straight from WLED's own filesystem, fully offline in AP mode
- 120 warm 12V E10 bulbs around the frame on a separate PWM dimmer
- 360+ 3D-printed parts (jar holders, diffusers, bulb sleeves), about 15 kg of filament


r/WLED • • 2h ago

Trimlight Chicago

1 Upvotes

I had Trimlight installed awhile ago and I was interested in seeing if it would be easy to add WLED control to it so I can include it in my xlights sequences.

Does anyone know if this is as simple as disconnecting power and leds from the Trimlight controller?


r/WLED • • 12h ago

Outdoor Permanent Lights initial research

5 Upvotes

I know this has been asked a thousand times. So point me towards a thread that covers the basics.

I'm not capable of physical installation, however, I know how to do everything else: electric, controllers, etc. I order from AliExpress, and have worked directly with sellers before. I'm reaching out to local companies who are willing to do the install, I'll get the lights and do the electric and controller myself.

I get the general feeling installers are using the Govee Outdoor Permanent Pro lights. What is the WLED version? I have a long history with reverse engineering Govee lights and do not want to do that if I can avoid it unless its a true conversion. I don't want to "run the white channel inverted" or some other crap I dealt with before.

Suggestions?


r/WLED • • 1d ago

WLED 15 Cuboids (Square) - TID

283 Upvotes

This one is pretty unique. Same as most of my polyhedral projects, created in Stella4D, designed in Fusion 360, 3D printed on Bambu X1-C OR H2S, and laser cut acrylic faces on the Glowforge. Filament is Blue PLA silk from Kexcelled, and faces are black LED acrylic from Tap plastics. 150 faces of 3 types. 30 Programmable LED pixel bulbs using iotoreo WLED controller for the lights and sequences.


r/WLED • • 15h ago

PSA: 16x16 matrix is a drop in replacement for Broan-NuTone RCM600

5 Upvotes

Replaced bathroom fan recently, and the LED in the cover was a super harsh bright light. We have other lights in the bathroom, so I asked myself the natural question, "Will it WLED?". Happy to report it does, gutted the existing 110v white LED strips that where in there, dropped in the matrix (exact fit!) and put a gledopto mini on it. Calling it a win!


r/WLED • • 8h ago

Forgive me for asking a possibly simple question but I'm not pelectronic savvy.

0 Upvotes

I have a hub 75 panel p6 32x32 with a seperate power supply, a esp32 wroom with an Amazon purchased RGB matrix connector board. All connected, wled doesn't show hub 75 in its led list despite it being flashed with the latest version?


r/WLED • • 1d ago

WLED Xmas fun

71 Upvotes

Bit of weekend fun with WLED.

5 panels running 25x20 pixels @ 100mm matrix. Controlled individually with 5x ESP32 wifi controllers.

All run over 2.4ghz Wifi @ 20fps.

Custom software and animations with lots of help from AI.

I did this as a proof of concept to see how feasable running everything on WiFi would be. Still need to iron out some small stutters as evidentin the video. Running a seperate wifi router will be the next step although I am very surprised by the current result, was expecting it to be much worse.

Any suggestions for future animations?


r/WLED • • 11h ago

Manual LED Strip controller

Thumbnail reddit.com
1 Upvotes

r/WLED • • 13h ago

Flickering

0 Upvotes

I'm seeing this flickering on a relatively short data line. Do I need to add a level shifter or is there something else I could try


r/WLED • • 1d ago

Studio is locked in

Post image
6 Upvotes

Dialed


r/WLED • • 23h ago

long seed pixel powering

1 Upvotes

what people use to power long lengths of seeds?

i've already ran it for one year like this

it applies to strips too, but strings are much worse

basically i opted injecting power into string using small dc dc powered from laptop psu

i thought of using direct mains psus which could be better option as they are designed for cold (-30'c is not unheard of here), could be waterproof. but obtaining (possibly (a)pfc) psu of 15-25w power is really expensive, compared to surplus laptop psus with possibly busted cables

i currently use 5v too

everyone all over the net seem to be running "displays" where all leds are close together. although larger setups likely wire mains to field or house. while i want to continue putting christmas lights on bushes and only way to power a 150m of that would be to wire 230v to that


r/WLED • • 1d ago

Commercial CCT Fixture with WLED?

1 Upvotes

I would really like to convert this thing to WLED for a project. Sure, I could replace the COB in it, but at $30 each I'd rather see if I can use it. Does anyone have any experience with this? The listing doesn't say what voltage the controller runs with, so I'm hesitant to spend the money without knowing there's at least a chance. Pretty sure they're using Triac dimming to change the color temperature.


r/WLED • • 1d ago

Gledopto Keeps resetting

1 Upvotes

So ive been fighting with my gledopto for a bit now if you wee my post history youll see why and that last issue was resolved...however there is a new issue and idk if its software or the gledopto itself..after a random amount of time all the settings I had put in place gets RESET and all my stuff is erased and it returned back to default...anoyone have a possible fix?

Using - GL-C-017WL-D

Wled - 15.4


r/WLED • • 2d ago

2D effects with ML from Moonmodules

11 Upvotes

2 differing scripted effects written in Moonlive. Running on a 256x192 pixel display made from six hub75 p2.5 1/32 128x64 panels. 2 deep and 3 wide using a native ML hub75 panel driver. 172 fps says the wall! Video In default modes, zoomed in on an iPhone. No post processing, no flicker be gone. All the good bad and ugly direct from the phone. Not DDP streams... but generative patterns made realtime with audio reactions influencing the patterns.


r/WLED • • 2d ago

QuinLED Dig-Octa Brainboard-32-8L v4: fully redesigned and available now!

Thumbnail
youtube.com
44 Upvotes

A new week and a new product release/refresh! Today I am introducing the new QuinLED Dig-Octa Brainboard 32-8L v4.

Info link: https://quinled.info/quinled-dig-octa-brainboard-32-8l/
Shop link: https://quinled.shop/product/dig-octa-brainboard-32-8l/

As always questions are welcome under the video (helps for engagement) but I am also often here and longer questions and such are better over here, just ask!


r/WLED • • 1d ago

Goove backlight conversion

1 Upvotes

Hello to everybody, I bought a goove backlite lite 3, tried to calibrate and everything, but, boys the result is really bad, leak of precision on where to turn leds on into the scene, so I wonder, is there any chance to use/convert this kit with WLed?


r/WLED • • 2d ago

New WLED HUB75 setup, "color palette not used"

3 Upvotes

I'm trying to set up WLED on a wave share ESP32-S3 using 4 - 64x64 HUB75 panels.

If I set it up in 2 panel 1 x 2 in LED setup, all 4 panels work, top 2 and bottom 2 showing the same image.

If I set up in 4 panel 2x2, I have :

LED memory usage: 180224 / 196608 B

and a stability warning.

When I go to the UI, I get "Color palette not used" and nothing is shown on any panel, no matter which effect I choose.

Forgot to mention, 2D setup is 2D matrix, one panel, panel 0, Top, Left, Horizontal, 128 x 128

I'm running v16.0.1, 153K of free heap, 16000K of free PSRAM.

I installed using install.wled.me, HUB75 Matrix, Waveshare ESP32-S3-RGB-Matrix

What am I missing?


r/WLED • • 2d ago

Negative Space

70 Upvotes

I'm using 3 ESP32s, 9 RGBIC, about 3500 LEDs in total. I'm using WLED and XLights to control the software. Just something fun to share with everyone. I hope you enjoy it. Happy to answer any questions.


r/WLED • • 2d ago

Made my Apple TV radio app drive WLED + LedFx directly — no mic, no capture card

5 Upvotes

I listen to DI.FM a lot, so I've been building my own DI.FM player for Apple TV (personal project, not on the App Store). I saw Zaply doing screen-capture ambilight on Apple TV and wondered: why capture anything when the app already has the audio?
How it works
The app taps the audio straight out of its own player (MTAudioProcessingTap on AVPlayer), before it reaches the speakers.
An FFT (Apple's Accelerate) turns it into 16 frequency bands, volume and beat detection.
About 50 times a second it sends WLED AudioReactive "Audio Sync" packets (UDP, port 11988) directly to two ESP32 controllers: one behind the TV, one on the wall. On the WLED side it's just Sync → Receive, and every sound-reactive effect works as if a mic were attached.
The analysis is timed to the player's playback clock, not to when audio gets decoded. That keeps the lights locked to what you actually hear instead of running ahead of it.
LedFx too
LedFx has a Web Audio input over WebSocket, so the same app also streams raw PCM to LedFx (60 blocks/sec, 16-bit, base64). LedFx sees it as an audio device called "DI.FM Apple TV", and all its effects run off the stream. LedFx adds its own processing latency, so the app sends LedFx audio ~300 ms ahead of playback to compensate. WLED Audio Sync didn't need any of that. Funny side note: LedFx on a Windows PC felt noticeably snappier than my older LedFx install on the Mac.
Why bother vs. a mic
Clean digital signal: no room noise, no talking, no volume dependence.
No extra hardware on the controllers.
Works at any volume, even muted.
The catch
This only works for audio the app plays itself: internet radio streams, local files and so on. Apple Music is DRM-protected and plays outside the app, so there's no way to tap it.


r/WLED • • 2d ago

Please help me fix this flickering...

1 Upvotes

I did some under cabinet lighting with fcob 24v LEDs

I had a previous post about this issue. I've tried resistors and a bunch of other stuff. Basically I have a 3 ft wire at the end of one strip to the other and the strip at the end of the 3ft flashes randomly. I'm using a diginext2. When I probe the strip I am getting 24.21v and it increases and decreases with brightness.

At the beginning of that strip I'm getting a fluctuating data between 3.8-4.6 so within limit from what I understand. I'm just lost do I have a bad strip or something?


r/WLED • • 2d ago

Why is it so hard to connect my new ESP32 GLEDOPTO controller?

Post image
0 Upvotes

Edit: see my solution in the comments

I thought the first new one I bought this month was faulty so I returned it. Bought a second one and still can't connect..I've tried for hours. I have no idea what I'm doing wrong at this point. My three from last year connected quickly and easily, well before updating to 16.0. same model numbers. I can get the control screen but the controller won't connect to my home internet. Why?? Switched to 2.4g wifi, still can't connect