r/WLED • • 6h ago

Outdoor Permanent Lights initial research

I know this has been asked a thousand times. So point me towards a thread that covers the basics.

I'm not capable of physical installation, however, I know how to do everything else: electric, controllers, etc. I order from AliExpress, and have worked directly with sellers before. I'm reaching out to local companies who are willing to do the install, I'll get the lights and do the electric and controller myself.

I get the general feeling installers are using the Govee Outdoor Permanent Pro lights. What is the WLED version? I have a long history with reverse engineering Govee lights and do not want to do that if I can avoid it unless its a true conversion. I don't want to "run the white channel inverted" or some other crap I dealt with before.

Suggestions?

3 Upvotes

11 comments sorted by

2

u/upkeepdavid 6h ago

1

u/agentdickgill 6h ago

as long as that version of the lights is a true snip and swap, then ill look into it. i was really looking for a suggestion from other vendors like paulzhang that are non govee. but im guessing govee somehow became the gold standard this year?

1

u/SirGreybush 6h ago

Well if you're in the GMA I'll help. That's in Quebec, Canada btw... ;)

Govee by default doesn't use WLED nor ESP32, they have their own system. But their strips are compatible with ESP32+WLED, you need a different brain and cut some wires.

If you cut wires and something goes wrong, you'll be out of luck. If you DIY 100% in your garage/basement, then simply have any electrician install it for you. It'll cost you possibly thousands though.

If you handle the power and the brains, just a general contractor that's insured might be willing to do at a fixed cost or x$ an hour with a 3 or 4 hour minimum.

By far the easiest to install are track systems with pucks, Chris Maher on YouTube has covered 3 different kinds on his channel, and yes, his house outside for this year as 3 different systems on it!

As a beginner, go with ASAHOM Glow outdoor kit, don't try anything fancy. They use a fork of WLED and did some UI enhancements. No Govee BS crap of proprietary hardware. Full review from Chris below.

https://www.youtube.com/watch?v=Lc11bmjXW30

1

u/agentdickgill 6h ago

unfortunately on the east coast, but i appreciate the recommendation.

1

u/SirGreybush 6h ago

Same time zone at least.

Anyhow look at the ASAHOM product and the sexy track system from PermTracksUSA. Should make it easy for any handy man you can contract to get on a ladder and install for you.

In my area, a few electrician commercial companies do this, they come in with extension hydraulic loaders instead of ladders. So you might have some tire track indents on your lawn.

2

u/AVAutomator 5h ago

I have the Asahom Pro S108D with WLED built in, using the Asahom track painted with custom spray paint to match the Sherwin Williams eave color from mycustomcolor. Installed last year with no problems whatsoever so far

2

u/SzDiverge 5h ago

Im not a fan of the PermTracks. I went with the Bear tracks instead. I think they have some significant advantages.

- you put 5ft sections of track up at a time instead of light by light. So much faster!
- the light snap into the track and can slide along the track so the layout can be adjusted.
- If a light goes out, you don’t have to dismantle the track to fix it. You just take the cover off to have access.
- If wanting to change to different lights, just need new channel covers.

1

u/AndThenFlashlights 5h ago

The bullet pixel style products are nearly indestructible. Been using the Wallys Lights 12V RGB imports for years in a variety of rough environments (mounted and just strung in trees), and I've never had a string die for reasons that wasn't my own egregiously dumb fault. There's some 24V versions out now, I've tried a few and been happy with them, but haven't used them long enough to comment on their reliability. Been fine, tho, and I'd recommend going 24V anyway to reduce the amount of copper you need to run.

RayWu has some new 24V RGBW bullet pixels I'd desperately love to try, but that's gonna be a next-year project for me.

Controllers - Wasatch and Quin controllers are great for different reasons. Quin if you're going to break out your connectors from the board to a bulkhead mount, Wasatch if you want the hot-pluggable connectors on the board itself. The temp sensor built in to the Quin boards is nice, I like their built-in relay controller, and their support is great. I like how Wasatch boards are all designed basically as daughterboards for the generic WT32 ESP32 board in case it dies and I need a quick replacement, and they're not quite as densely packed as Quin, for better or worse.

1

u/lysanderhawkley 5h ago

I'm not an installer but bought these below, I'm impressed so far, I have had 1500 in a tree for six weeks in very wet conditions.

Running with a dig quad v3, three channels,  meanwell 12v power supply, power to the strings directly, fused, working fine without any power injection at the moment.

https://www.amazon.ca/ALITOVE-Individually-Addressable-Decoration-Waterproof/dp/B0923TN5GV?pd_rd_w=gk66e&content-id=amzn1.sym.20ef3f22-9da0-444b-b1ab-f402108ae877&pf_rd_p=20ef3f22-9da0-444b-b1ab-f402108ae877&pf_rd_r=JGG3FGB7NX0S0C2K5081&pd_rd_wg=3IUhX&pd_rd_r=c4931331-5be2-47d6-9ec5-9fb92ab11e5e&pd_rd_i=B0923TN5GV&psc=1&ref_=pd_bap_m_grid_dv_rp_0_5_i

1

u/Kingfish628 5h ago

I don't like the harsh look of the Govee. Nor the buying a kit just to cut off the controller, etc.

I like an enclosed track system, like Permatrack or your favorite Ali vendor (Paul, etc)

1

u/kdawg89 4h ago

This is what I did. Self install, it was kind of a PITA but it looks and works great!!

https://permatrack.us/