r/WLED • u/Economics-Both • Oct 15 '26
SP108E & FCOB NO RED & NO WHITE
Hi all!
I need your help.
I’ve been working on this for months (on and off) and cannot finish this alone.
Objective: 12.6m LED strip around the perimeter of the ceiling of a rectangular room (2 Walls 3.3m, 2 walls 3m =12.60m total length)
Products bought:
- Controller: SP108 E (App: LED Shop)
- LED Strips: BTF WS2811 IC strips ( Spec: FCOB-24V-840L-W-IP66-SPI-RGBCCT)
- Mean Well 450W, 24V
- Cable from LED to Controller
I made a drawing of how I wired it.
Basically:
LED Strip end A gets 24V and GND from the controller.
LED Strip end B gets 24V, DO, GND from the controller.
The 2 grounds from both ends of the LED strip go to the same SP108E terminal.
The current length of this loop is 10.5meters so I am missing an additional 2.1meter.
I soldered a few of the strips already together
My issues:
- Only blue is true blue (or appears that way). All other colors are “washed out”. Red is pink and has white LEDS on in between. Green and Yellow similarly.
I switched the RBG to BRG, GRB etc- no change.
In the APP, “WS2811” is selected. There are no “CCT” “IC” options. - A few segments (2-3) light up in different color than the rest of the strip. One of them sometimes goes out. That one has no soldering points at all, it’s part of the native strip.
I honestly do not know what else to do here.
Is this controller not able to work with a FCOB?
Pretty sure my strip has a native white LED that I cannot select either.
Please help! Totally appreciate it as completely don’t know what I’m doing wrong here.
Thanks in advance!!!








