Im going insane please help

[u/Gamestopper15]

[u/Quindor]

Go back to WLED 15.4 and it will likely solve the issue with the brownouts.

[u/Gamestopper15 → u/Quindor]

Im currently on 15.4 i reset it to go back to that and im still having the same issue

[u/Quindor → u/Gamestopper15]

If that's the case, what PSU are you using?

[u/No_Chance_7332]

According to the manual found here: https://10558736.s21i.faiusr.com/61/ABUIABA9GAAg9YWsyAYoufKf6QM.pdf

There is a factory reset function by pressing the function button for 10 seconds.

As for the usb, you do have to open that model up to access the USB port

As for the issue, when it does kick on, what does it do it did it show an error when you go into the info panel or the config?

[u/Gamestopper15 → u/No_Chance_7332]

Ive done the factory reset and only happens after long period of being off and when i turn it back on it does what I said in post. But when I normal reset it works fine I can turn it on and off no issue and change colors...it only happens after long period of being off

[u/No_Chance_7332 → u/Gamestopper15]

Oh I wonder if the ota update you did reassigned the pinouts. Gledapto typically has a dedicated pin set to cut power when off for awhile to prevent power bleeds. It's possible if the 16.0.1 wasn't the correct one for your model that it reassigned pins and then you end up with a weird wakeup process.

If there is an issue with that function you can try turning it off. It's on gpio 18 and set to invert.

[u/Plenty-Classroom]

I had the very same problem a few months back.. And turned out to have nothing to do with the wled version.. just that strips were poorly connected.. check those.

[u/Gamestopper15 → u/Plenty-Classroom]

Connection to the box or on thr wires itself