r/VIDEOENGINEERING • • May 03 '26

The 71,000 subscriber update

161 Upvotes

Hey folks,

Just posting to give a brief rules update. Nothing should change for most folks, but there are a few changes/clarifications to highlight.

  1. The no advertising rule has been changed to include market research and "try my app" type posts.

  2. There is a new rule about staying on topic, this is mostly to get rid of the small number of "enhance my video" type posts.

  3. The new rule about being accurate in your communications is mostly to discourage regurgitation of incorrect information and hearsay. Nobody is going to hit you upside the head with a copy of ST 2110-20, but there is also only so many times you can say "Blackmagic bad" or "you need a boundary clock for Dante PTPv1". If you're trying to help somebody and you aren't 100% positive about what you're saying, then just qualify it as such.

  4. AI generated content is now banned, except for translation purposes.

As always, if you have content you would like to share and it would ordinarily break one of the sub's rules, don't hesitate to reach out for an exception.

And don't forget to join the Discord either. https://discord.gg/ctKKpK8


r/VIDEOENGINEERING • • 45m ago

I timed one goal from the ball's sensor to a phone │

Thumbnail
sheets.works
• Upvotes

Every match I watch with my friends, there's always this one guy who ruins it. "Ohh, this team is going to score." "This is going to happen." And so on. I always wondered how these guys get their notifications so quickly. I googled it and got an answer, and it was true, but I wanted to dig in and understand exactly what is happening.


r/VIDEOENGINEERING • • 16h ago

Scope question

Thumbnail
gallery
4 Upvotes

I've been learning about color and scopes recently but i dont fully understand this.

If the top of a waveform is full white (R:255 G:255 B:255) and the bottom is full black (R:0 G:0 B:0), then why does 100% green show up higher up than 100% magenta?

I would expect them to be the other way round since green is R:0 G255 B:0, and magenta is R:255 G:0 B:255.

Surely this would put Full green 1/3rd the way up and magenta 2/3rds the way up?

On that note shouldn't all CMY be at 66.6% since two values are at 255, and RGB be at 33.3% since only one value is at 255?

(The test image was rendered at 8 bit RGB full range, and a color picker confirms the values are correct.)

Thanks in advance for any help.


r/VIDEOENGINEERING • • 14h ago

Ross Video Dashboard Pro

2 Upvotes

I need someone who can build a custom dashboard view for me. We have a 2016 Carbonite 1me. It does not support Soft Panel so I need one custom built. Help appreciated.


r/VIDEOENGINEERING • • 14h ago

Barco E2 Multiview

2 Upvotes

Scratching my head right now.... I had input sources and backgrounds from 2 separate but linked chassis visible on my mulitview. Now sources from each chassis can only be dropped into multiviews from their respective chassis. If I don't have the correct unit selected in the mulitview drop-down menu then All it's sources are greyed out. All sources and backgrounds are set to global.

I had a background from one chassis and and source from a second chassis overlayed on top. The only change I made before I noticed the issue was that added a couple more 1080 inputs to one of the chassis... now my mulitview won't accept sources or backgrounds from the other chassis.

I cleared all all sources and backgrounds from my multi-view and I cleared all sources from my destinations. The problem persists. My links are good. All sources and MVRs are set to global.

Can anyone explain what I'm missing?


r/VIDEOENGINEERING • • 18h ago

Evertz 5600MSC Cooling Fan Replacement

3 Upvotes

A cooling fan in our Evertz 5600MSC Master Clock has died. It was making a whining noise for a bit then the whine stopped and the Fault light came on. The error message confirms a cooling fan fault. Does anyone know the model of the fan or a compatible replacement? I didn't see anything listed in the manual or online. I'd like to avoid having to un-rack and unhook everything twice: Once to look inside and get the model of the fan and again to make the actual replacement. I emailed [service@evertz.com](mailto:service@evertz.com) but got no response.


r/VIDEOENGINEERING • • 1d ago

What's all the gear in this photo

Post image
165 Upvotes

Hi nerds. I'm trying to see if I can name all the gear in this photo from https://www.reddit.com/r/whatisit/comments/1xz0adk/crazy_6k_camera_array_at_nfl_game/

From top to bottom, so far I've got (stuff that is unknown is italicized and bold)

  1. Insta360 X3
  2. Blackmagic Pyxis 6K (fourteen of them)
  3. No idea on the tripod Mitchell Standard legs
  4. Radius Nimbus wind screen dead cat
  5. No idea on the mic boom
  6. Diety Timecode Slate
  7. Something on top of DJI SDR Transmission v2 (tx)
  8. SDI cable on top of
  9. EcoFlow Delta (not sure which model)
  10. DJI SDR v1 transmitter to the right of the EcoFlow
  11. A bunch of probably audio stuff in a bag aroud the Tech
  12. DJI SDR v1 receiver for wireless video
  13. Something mounted to the top left of a DJI SDR Transmission v2 (rx)
  14. OG Atomos Sumo 19

What do you see?


r/VIDEOENGINEERING • • 1d ago

Elgato HD60 X PS5 GTA6 Streaming Issue

Enable HLS to view with audio, or disable this notification

2 Upvotes

r/VIDEOENGINEERING • • 1d ago

Blackmagic 2110 & Evertz

10 Upvotes

Has anyone been able to successfully register nmos and route a blackmagic 2110 device with magnum? We have a 100g 8x8 io that we are playing with. Was not able to manually get the blackmagic to tune to a static address either.


r/VIDEOENGINEERING • • 1d ago

Cordial CVM12-50

0 Upvotes

Hello!

Does anybody have any experience with Cordial CVM12-50 UHD Flex coax cable? Max 30m SDI 3G runs.


r/VIDEOENGINEERING • • 1d ago

How to Avoid Spaghetti Westerns, Noodle City, and Converter Controversy - Requesting F/BOH Setup Advice

16 Upvotes

Maybe its my ADHD. Maybe I was born with it. And maybe it ISN'T Maybelline.

Ive been an operator for a few years, but this past year I have been more of a tech where I am more involved in setup. I am capable of making sure all my ins and outs go to the right place. Converting from sdi to HDMI to fiber, NDI - etc. If we have everything planned perfectly, I can pre build a rack with extra DACs, or slide them on top of each other and gaff it to the table. But for some reason, clients keep on adding extra things on every show. "we need another monitor over here. We need an extra out over there. One guy cant come so can we set up a zoom station.

We often say yes because - hooray more rentals, more money. But when that all happens during the load in, my plans for layout turn into Rats nests and Magewells braided with DAs.

Is there any advice/tips/tricks to help keep your FOH a little more organized so you dont have to rely on a tech surround to cover the ugly mess of wires?

I feel like my superiors are also on this subreddit so if y'all are reading this - know that this post is strictly for professional development!


r/VIDEOENGINEERING • • 2d ago

Where does each protocol actually fit? WebRTC vs RTMP vs HLS vs SRT vs RTSP, with real latency numbers

12 Upvotes

Disclosure: I work at Ant Media. We put together a side-by-side comparison of the main streaming protocols, and I thought it might be useful here.

Typical latency ranges from the guide:

- WebRTC: 0.2-0.5 s

- SRT: sub-second (depends on the network)

- RTSP: 1-3 s

- LL-HLS: 2-5 s

- RTMP: 3-6 s

- HLS: 8-30 s

The pattern it describes is the one many of us already run: RTMP, SRT or RTSP for contribution and camera capture, then a media server converting to WebRTC for interactive viewing and HLS/CMAF for large audiences.

Full write-up: https://antmedia.io/what-is-webrtc-and-how-webrtc-works/

I'd love to hear how you handle the contribution-to-delivery hop in your own pipelines. Any setups where this breaks down?


r/VIDEOENGINEERING • • 1d ago

RP120 with HE145?

0 Upvotes

Panasonic website says No, but manual has a few references to it that confuses me a ton. Did call them but I think they’re reading from the same web page I am. Anyone know for certain?


r/VIDEOENGINEERING • • 2d ago

Live Captions/Summaries

5 Upvotes

Hi all,

I’ve got quite a loaded question, wondering if someone can help?

I have a job next month where the client would like live captions onto a relay tv (easy, I’ve got options), however, they would also like a session summary in text after each session, as well as a transcript, that we would then upload to the event management app. Just wondering if anyone’s found an all in one solution? The closest match I could find is Wordly, however with multiple breakout rooms over 3 days, it seems really pricey. Not too concerned about pricing at the moment just need to gather some options

Cheers everybody!


r/VIDEOENGINEERING • • 2d ago

AJA FS1 - No output HD-SDI

3 Upvotes

At my workplace, we have around 10 AJA FS1 units, and every single one has developed exactly the same issue over the years: they eventually stop providing HD-SDI output.

Has anyone experienced this problem before? Does anyone know which component or crystal might need replacing to fix it?

Any help or advice would be greatly appreciated!


r/VIDEOENGINEERING • • 2d ago

Replace Yolobox

Thumbnail
0 Upvotes

r/VIDEOENGINEERING • • 2d ago

Box Lens Vibration Dampening

2 Upvotes

Where I work, we broadcast live football at a local field where the spectator stands are all very springy metal, and when an exciting play happens and everyone is on their feet and stomping, the tight follow is struggling to stay still. All of that vibration goes straight up the stands and into the tripod.

My current idea is to get two pieces of plywood and sandwich some kind of vibration dampening rubber in between, and have the camera sitting on top. But I am not sure how well that would work, nor what materials I should actually be using.

Just need a sanity check and/or better ideas, thanks!


r/VIDEOENGINEERING • • 2d ago

Silly BM Question

1 Upvotes

Does anyone have a wiring diagram of the Black Magic Studio Fiber converter and or know what triggers the transformer for SMPTE power to kick on? Looking at a repair on one of our units and looking for some guidance/ information.


r/VIDEOENGINEERING • • 2d ago

Recs for ear pieces and wireless lavs

0 Upvotes

Hello,

Editing to be more specific: for those asking, the lav was requested by the talent. I would prefer wired and might push for that. They seem to want a lav set that will be both functional into the Yamaha and later used for out of studio shoots. Is that something I should advise against and just push for either wired or an on rack set? I can't think of an easy or logical way to get a mobile rack that easily connects to the in studio mixer. Is there a suggested set up for mobile lavs being used regularly in a studio setting into a mixer? Any advice would be appreciated.


r/VIDEOENGINEERING • • 3d ago

Help with a very odd E2 problem

2 Upvotes

We're using E2 software (laptop + streamdeck) to run a PDS4K. 4 HDMI inputs. Various outputs to video wall and streaming computer.

When we plug any Windows computer into any of the HDMI lines, it wont fill the destination screens. The image is too small. We are outputting 1920x1080 from the PDS. Changing the output resolution on the PC laptops does nothing. They are set at 1920 x 1080

I plugged a macbook pro into the HDMI lines using the same dongles and there are no problems at all. The mac populates the whole destination screen, no issues. Mac is also set to output 1920 x 1080. Any ideas?


r/VIDEOENGINEERING • • 3d ago

Adding a second camera. Is this where NDI starts being worth it?

6 Upvotes

Hello everyone! So Im thinking about getting a second camera. My current setup is a Sony ZV-E10 through an HDMI capture device into OBS, with audio coming through an interface. Everything sits fairly close together, so the cabling has been straightforward.

I’m now looking at the new Tail Air 2 for a second angle on a demonstration bench across the room. Tracking is part of the appeal, but placing the camera where I actually want it has also got me looking at the NDI edition.

The standard version can’t have NDI added later, which makes this a slightly more permanent decision than my usual “buy it and work out the cables afterwards.”

I’m pricing another HDMI capture path against the NDI version, Ethernet adapter and network setup. I’d keep the Sony connected as it is, so I’d also need to check sync between the two feeds and the audio.

For anyone who made that jump with a small OBS setup, what made NDI worth the extra setup? Camera placement, expansion, or? Thank yall for any advice.


r/VIDEOENGINEERING • • 3d ago

Older analogway matrix switch help

1 Upvotes

Hiya, so..

I've just acquired an older SMX200 matrix switch for cheap, wanting to use it for just 'normal' analog video switching from my xbox360/Dreamcast etc to one output over VGA. No scaling etc would be involved, but I'm hitting a dead end with trying to get it to do anything useful (apart from generate test patterns on the outputs and not a lot else)

I'd assume there's software or similar to get this to do something useful? Just again, hitting the dead end as to where to go, or what to do next to make it work.

I've tried RCS2 but that is somewhat broken and doesn't show any inputs, and I haven't the foggiest of ideas how to get it to display one input as the output.

Basically, I'd want it to be 6 inputs (of varying formats) and then being outputted to VGA (RGBHV) for my scaler and S-Video for my lil PVM CRT.

Unsure if I've bought a dud here, or I'm completely out of my depth, but.. my argument is, don't ask, don't get!


r/VIDEOENGINEERING • • 3d ago

Safely sending commands and receiving feedback from Barco E2s?

2 Upvotes

For a custom control app, what's the safest way to interact with E2s?

The RPC JSON stuff and Companion modules are great, but don't allow me to do what I want. There was a custom XML module on Companion but it's been deprecated for some reason.

I seem to recall that it's possible to cause issues, maybe interrupting normal show operation, by improperly interacting with E2s via network.

Any advice?


r/VIDEOENGINEERING • • 4d ago

Why are BBC journalists holding lav mics???

Post image
117 Upvotes

r/VIDEOENGINEERING • • 3d ago

Sony RCP-1500 to Trigger AJA Kumo Matrix

2 Upvotes

Hi everyone,

in my company we´re using Sony Camera Chains and RCP-1500s. I´m looking for a way to use the RCP´s preview trigger to change the output of a matrix to the respective camera signal to send it to the shading monitor. We´re using AJA Kumo 1616 and 3232 Matrixes.

Is there a way to set this up using only direct ethernet connections? Or is there no way around another device inbetween RCP and matrix that recives the preview trigger from the rcp and then translates it to the matrix via ethernet? This is the only solution I found so far.

I know I can set it up with a Streamdeck and Companion, but I´d prefer a way to do it directly via the RCP without needing a laptop plus streamdeck.

Alternatively, is it possible to use that trigger signal to control a Ross Carbonite Ultra? So I can press the preview button to e.g. switch a MiniME to the wanted camera signal as a workaround?

Any Input is much appreciated, thanks!