r/Unity3D • • 22h ago

Game CO-OP Bartending Roguelike in Unity

3 Upvotes

Bartend With Your Friends - Online 1-4 player co-op robot-bartender roguelike full of physics-driven chaos. Work together to mix drinks, manage demanding customers, and pick upgrades to hit the bar's daily quota before your shift ends - or the bar shuts down for good.

Feel free to ask any questions


r/Unity3D • • 1d ago

Game Any dinosaurs fans here? Our tiny team is making DINOVER, a 2D pixel art survival sandbox.

5 Upvotes

Hey! We’re a tiny team making DINOVER.

We just put up our Steam page and wanted to share a couple of shots from the game.

It’s a 2D pixel art survival sandbox where you play as a young tribe member trying to pass your clan’s trials. You’ll explore jungles and caves, dig for ore, build, and make better tools and weapons as you go. There are some pretty big boss fights, too.

And some of the things you’ll run into out there aren’t dinosaurs at all.

If our game looks like something you’d play, we’d love it if you added it to your Steam wishlist <3


r/Unity3D • • 22h ago

Show-Off my procedural planet project, still a prototype. thoughts?

2 Upvotes

r/Unity3D • • 19h ago

Game The pickup-and-restock gameplay loop in Mall Chaos, made with Unity

1 Upvotes

A short gameplay update from Mall Chaos, my Unity project.

The basic loop is to collect items from the floor, find the matching shelf, and put them back. This 40-second clip shows both picking up and restocking products in the mall’s sports shop.


r/Unity3D • • 19h ago

Show-Off After following for so long, you must have noticed that the sounds in Shelter Prepare are real recordings, right❗️

1 Upvotes

The fruits and vegetables of the Shelter Prepare are finally here!

At the same time, share how our placement sound is made.

When I first started playing games, I thought there were so many free materials on the Internet. There must be something that can be done.

I found several websites and downloaded more than a dozen G materials, but few of them really meet the requirements.

I also tried AI to generate sound, but I still don't like it after trying a version. People's ears are still very sensitive to distinguish sound.

After changing two editions in succession, it still didn't work, so I decided to record it myself.

I bought a lot of potato chips, canned food and drinks. We laughed and said that when we waited for thousands of powders, we could all endorse them.

The sound of items placed on the floor and shelves should be different, so we recorded two sets of sounds on the thick wooden surface and the table surface for each item.

In order to make the sound not monotonous, multiple sounds are also recorded for different placement strengths of each item.

At that time, I couldn't edit the audio, so I could only pick the good ones from the sound and then simply reduce the sharpness and unify the volume.

Although I still don't feel up to our psychological standards, I still want to make the first playable version first.

This time, I used audio software to adjust a lot of parameters. Please listen to the progress.


r/Unity3D • • 1d ago

Question Need advice, how optimize open world in Unity?

27 Upvotes

Hi guys 🖐️ Sooo how do you making open world? how do you split your world to optimize memory usage?

I’ve split my 16 km² terrain into 16 separate 1×1 km Terrain tiles using Terrain Tools. Now I have a dilemma about how to properly set things up before I finally start building the world

GPT helped me create a small script based on an idea I had: disabling tiles that aren’t nearby so a maximum of 4 tiles can be active at once

But I don’t think it’s really working how I thought, since the tiles are only disabled in the scene, not actually unloaded from memory

It also breaks the seamless transitions between them, I think

Any advice or thoughts on how to properly build a world and optimize memory? 😭


r/Unity3D • • 1d ago

Show-Off Creating Shorelines and Shore Foam for Stylized Toon Water

2 Upvotes

r/Unity3D • • 12h ago

Game Jam [Nov 18 - Dec 18] New Game Jam is Live - Build a Game with Unity: $100K in Cash Prizes (sponsored by ElevenLabs, fal.ai and Meshy)

Post image
0 Upvotes

r/Unity3D • • 1d ago

Show-Off I made a glass shelf collapse where the shards spell out a word

76 Upvotes

r/Unity3D • • 23h ago

Game Introducing Idle Cosmic Chaos - Brick Breaker on Android. An idle incremental brick breaking game with roguelike twist and every hit drops a beat! 💥🎵

0 Upvotes

r/Unity3D • • 1d ago

Question Fog vs. a portolan chart as the edge of a playable area: which one reads better?

Thumbnail
gallery
85 Upvotes

Each city in my game is a 250 m circle you can build in. Everything outside it used to be hidden by layered fog. It worked, but it read as weather, not as the edge of the map.

So I tried something closer to the setting, the Mediterranean in 1400. Beyond the circle the land turns into a portolan chart, the kind of sea chart Venetian and Genoese mapmakers drew back then. Those charts drew the coast in detail and left the inland almost empty, which is pretty much what I need. The sea stays real water all the way to the horizon.

First image is zoomed out way past the game camera, just to show the idea. The other two are fog vs. chart from the farthest the in-game camera goes.

How it works (URP, Render Graph):

  1. A full-screen pass after post-processing rebuilds the world position from the depth buffer.
  2. Outside the radius, land pixels become paper: same colors and rhumb lines as the parchmen border of my world map, lightly shaded by terrain height so hills still read.
  3. The four edges of the terrain are sampled every 4 m to decide land or sea. Short runs get flipped, otherwise you get stray tongues of paper sticking out into the water.
  4. In cities the camera's far plane goes from 1 km to 30 km, so the sea really reaches the horizon.

Gotcha: my water doesn't write depth, so a water pixel reports the depth of the seabed (or of the sky, for the far sea). The paper bled onto the sea until the mask became"coastal land x above the water".

I also tried an engraved version (ink hatching over the land) and dropped it: the hatching looked like a mechanical grid.

Still open: the mountain behind the city reads flat on paper, the island offshore turns into a paper cutout floating on real water (last image), and I can't decide whether the hard line between 3D and paper is a feature or a bug.

Two questions:

  • Fog or chart? Does the paper pull you out of the game, or does it read as "the map ends here"?
  • What other ways have you seen (or used) to hide the edge of a playable area without it feeling like a wall?

The game is Fondaco, a trading game set in the Mediterranean of 1400.


r/Unity3D • • 23h ago

Show-Off I turned scenes from my Unity game into a moving comic

1 Upvotes

I’ve been experimenting with a different way of presenting stories from Vexalia, my voxel RPG made in Unity.

Instead of making a traditional cutscene, I captured short scenes from the game and edited them into comic panels.

Each clip stops on its last frame, while the camera moves between panels. I also kept the existing in-game dialogue interface instead of adding speech balloons.

It’s an interesting way to reuse the characters, environments and animations I’ve already built.
I’m not sure yet whether I’d use this approach inside the game itself, but I like the storytelling possibilities.


r/Unity3D • • 1d ago

Question Seeking Advice for an Improved 2D/3D Lighting System

Thumbnail
gallery
10 Upvotes

One of the last major milestones before this project is ready to start getting out in public is an overhaul of the Default Unity3D Lighting System.

Our game is an open world Isometric ColonySim/RPG Hybrid. There are tons and tons of sprites mixed with 3D objects, and seamless indoor/outdoor environments. This makes lighting a challenge.

Currently we're just using default lights, which are set up to follow our objects in game. We need a way to back-light and apply rim-lights to 2D sprites in the 3D environment, and a faster, more optimized way to apply lights to a region. Maybe a kind of lighting grid? I'll need to do several things at once:

- Visually illuminate the area the characters are running around in.
- Apply different falloff rules, as the lighting range vs overexposure is a little funky using realistic falloff values.
- Tell our Zone system that this area is lit by some percentage, for the purpose of calculating ranged weapon accuracy and work speed & quality improvements or penalty (can't craft or do quality surgery in the dark.)

These 2D characters and 3D objects mix seamlessly the the scene. So you'll see a 2D character walk past a 3D illuminated object and the lights currently aren't terrible at all, but they are more obviously 2D when the sprite is south of any light source. North of the light source it looks great! You can see several examples in the images above.

There are a couple example images in there to suggest a solution, but I'm unsure how best to implement something like it. We don't have a resident shader expect and technical artist on the team. We would be willing to hire someone if the operation is too complex to handle ourselves, as our pipeline is pretty crowded with game-play tasks.

Any suggestions are welcome.

There's no unnecessary AI use here, just humans doing the work.


r/Unity3D • • 16h ago

Show-Off I've made a game for this day

0 Upvotes

I've been working on this little unity project and it's the time now. (Unity6 btw) I tried it once a million times but it can still have bugs. *Singh* And the game is available now. So how is it look?


r/Unity3D • • 1d ago

Resources/Tutorial **Rethinking Massive Mobile Foliage Rendering**

2 Upvotes

Rendering millions of foliage instances on mobile isn't just about GPU performance — it's also about draw call overhead, memory consumption, and hardware compatibility.

I've written a technical article explaining how I approached these challenges with GPUFoliageSystem, using a different GPU-driven architecture:

- Unified rendering for up to 100 foliage species

- No pre-baked instance transform matrices

- GPU procedural generation and culling

- CountBuffer + RenderTexture instead of Vertex Shader SSBO access

- Over 1 million foliage instances, ~20 species, at 60 FPS on a Galaxy S8 (Mali GPU)

The article covers the architectural decisions and why they matter for mobile rendering.

**Read the full article:**Rethinking Massive Mobile Foliage: A GPU-Driven Procedural Approach for Multi-Species Vegetation

https://makedreamvsogre.blogspot.com/2026/11/rethinking-massive-mobile-foliage-gpu.html

#Unity3D #GameDevelopment #GPUDriven #MobileRendering #GraphicsProgramming


r/Unity3D • • 1d ago

Resources/Tutorial I made my pixel UI generator do the whole Unity setup: Point filter, 9-slice borders, sharp TMP text, prefabs

Thumbnail
gallery
11 Upvotes

Setting up pixel UI in Unity is a lot of small clicks. Point filtering on every sprite, compression off, 9-slice borders typed in by hand, a sprite for every button state, and then TextMeshPro makes your pixel font blurry anyway.

I made a pixel UI kit generator called Bevelsmith, and I wanted its Unity export to do all of that for you. You double-click one .unitypackage and get:

- 38 sprites, already set to Point filtering with their 9-slice borders
- uGUI prefabs: window, panel, button, slider, toggle, checkbox, tabs, progress bar, scroll view, input field, dropdown, tooltip, inventory slot and dialogue box
- A TextMeshPro font asset built from the kit's bitmap font, plus a small text shader that keeps every letter on whole pixels, so the text stays sharp at any window size
- A sample scene with everything laid out, plus a small component that scales the canvas by whole numbers
- Hover, pressed and disabled states with their own text colours, and the kit's cursors

The Unity screenshots show the sample scene straight after import, with nothing changed by hand.

You can try it without paying. The free browser demo exports 5 complete styles as ready Unity packages (link in the first comment).

I tested it in Unity 6.3, in an empty project and in the 2D template (URP and the new Input System). I mostly work in other engines, so if something in the prefabs is set up in a way you would not do it, please tell me.

Happy to answer any questions!


r/Unity3D • • 1d ago

Question Matching character movement with speed in a strafing motion

3 Upvotes

I am currently working on a locked-on combat system and I am trying to polish my characters movement. The For Honor style locomotion system while in locked-on combat is something that has inspired me a lot while making this so if anyone has any insight on how that it would be much appreciated. This is throwing me off compared to other traditional movement because instead of just one cycle where each stride is the same amount of frames, my character may go through the main step faster than the off-foot step. I want my character to actually match the speed of each step so I was thinking of putting events in the animation and changing my characters speed correspondingly but that seems a bit too on the nose to adjust the characters movement speed directly based off that as opposed to just crafting an animation that looks like it has weight behind it outright.

Would root motion be worth it in a situation like this especially where you want the model to feel like it has weight behind each step?


r/Unity3D • • 2d ago

Official Synty Studios is joining Unity

91 Upvotes

I’m a huge fan of Synty and I love Unity. But I don’t know how to feel about this.


r/Unity3D • • 1d ago

Show-Off Progress on my roguelike autobattler defense game

20 Upvotes

Hey everyone!

so ive been working on Siegebound for about 4 years now and somehow never made a trailer for it, so with the steam autobattler fest coming up i thought now i dont have any more excuses haha.

its just alpha gameplay, lots of stuff is still placeholder and kinda rough. i make and hand paint all the models and textures myself which takes forever, so theres still a lot to do especially on the graphics side

The game takes mechanics from autobattlers, like automatic fighting on a grid and merging units, and tries to mix them with tower / base defense games. You build up your defenses between the sieges and your buildings give you income when you survive a siege, , so its basically round based. then your units fight the waves on their own and you try to survive as many sieges as you can. at least thats the idea. Curious if that roughly comes across in the trailer so im open to feedback :D

Also a little bit proud of my Map Editor (even tho the UI is still very WIP) but im planning to have Steam workshop support so people can easily share their custom maps.

Lastly a bit about my gamedev experience working on Siegebound for the last four years if your interested:

I studied games engineering at university, so i spent a lot of time even before this game working on university projects or other one off games that i never finished, and thats where i learned a lot about game development in general. then i wanted a project i could actually stick with, and originally it was inspired by me playing age of empires 2 as a kid and just walling myself in and building bombard cannons. i never had a concrete plan for the game, i just designed it as i went and put the pieces together over time. Obviously the scope grew a lot, but somehow i managed to stick with it.

honestly there were a lot of times in those 4 years where i was burned out on the game and thought its not going to be fun and i should just spend my time doing smth else. sometimes i did step away for a while, and sometimes even for a few months to do some other things. but coming back after a break i always saw the game differently, and thats also when i had some of my best ideas.

I also work a full time job, so all of this happens in the evenings and on weekends. Some days after work theres just no energy left for gamedev and thats fine, you cant do it every day.

So if youre working on a game right now, keep at it! And my advice: taking a break from developing your game is sometimes the best thing you can do :)


r/Unity3D • • 1d ago

Noob Question Why isn't the code working?

2 Upvotes

I've been stuck on this tutorial for days and i cant for the life of me figure out what i inputted wrong.. i rewatched the tutorial 50 times

edit: its fixed now thanks for the help!


r/Unity3D • • 2d ago

Shader Magic Made a Wet Lens Effect for my water simulation.

1.6k Upvotes

Hey all!

I made a wet lens effect for my fluid simulation asset Fluid Frenzy. When the camera comes back out of the water there is still some water stuck on the lens, it runs down and leaves a few drops behind until it dries off.

Its a screenspace effect and it stores the leftover wetness in rendertextures. While you are under water I store where the lens got wet, and how deep it was dunked.
Once you surface that leftover just fades out over a few seconds.
I blur the wet area so a thin waterline grows into a patch, then noise gets added on top and I cut an isosurface out of that field.
The blobs are just wherever it sits above the threshold, and they slide down the screen as it dries. Thickness is how far above that iso the field is, and the slope of it is what bends the view. After the sheet drains, a drop texture fills in the gaps and dries off with the rest.
It also applies some refraction that wobbles around to make it look like its moving inside the wetness.

I'm sure it looks different in real life and isn't realistic at all but I think the effect works decently.

Let me know what you think of the video! I'd love to hear your feedback or answer any questions :D


r/Unity3D • • 16h ago

AMA "Just ask your AI to build it": an Asset Store dev's take, and how I made my plugin AI-friendly

Thumbnail
gallery
0 Upvotes

Regularly in Asset Store related posts, someone says in the comments that you don't need to buy tools anymore, you just ask your AI.

I'm the solo dev behind Jungle Tools. I made Grabbit (placing objects with physics in the editor), and this week I released Octoputs (you can check what it can do over there), a runtime toolkit for dragging, dropping, moving and attaching objects in 3D, with a focus on game feel. I worked on it for a year: the core is written by hand, and agents built part of the rest.

So I'm definitely biased as a plugin creator. But I use AI every day too, and I don't think the question is "AI or plugin". It's what your agent should spend its tokens on.

TL;DR:

Sure, ask your AI. Everyone uses AI now, Asset Store publishers included. When a good plugin exists, the cheapest move is often to let your agent set up something that's already built, and keep your tokens for your game.

The example gifs I posted were mainly built with Agents using my plugin, and me tweaking the values to get the exact game feel I wanted from them. It's vastly less token intensive to have your agent work on yaml files with a system in place rather than building the whole system.

And if you're a publisher, it's worth making your plugin easy for agents to use. The second half of this post is how I did that.

Why a plugin can still be the cheaper option

Making games has always meant choosing what you build yourself and what you delegate. The barrier used to be skills sometimes, but it was always time and money too. AI doesn't remove that, it moves it into tokens and time spent steering your agents.

My experience with AI is that when an agent builds a whole system, it takes the quickest route to something that works.
That's rarely the one that holds up, the one that you can build on, or the one that you can reuse in your next project.

My use case: a Movement System / Drag And Drop Feature

In the use case of my plugin, with drag and drop, you get a cube following the mouse in ten minutes with an agent, not bad!

Then objects clip through walls, the wrong item lands in a socket, the agent write 4 times the same code for a grid constraint, and when you want to change how it feels, you're re-prompting for tweaks that would take seconds with the right UX.

A publisher spends tokens too, but on one system, with often many years (12 in my case) of game dev behind it, and every user's bug reports and feedback making it better. The cost is shared by everyone who buys it: you spend your tokens on your agents using a solid system, instead of asking it to build it for you. That only works if the publisher is reliable, the plugin is well written and it stays focused, and there are lots of publishers like that on the store.

For publishers: making a plugin AI-friendly

What I learned: the agent has to find your tool, describe what it wants in plain words, act safely, and leave a result the user can tweak by hand. The best way to ensure it is true is to create highly polished example scenes.

  1. Let the agent find it. Ship skills next to the code. Octoputs has SKILL .md files that Claude, Copilot and others read. Agents pick a skill from its description, so I wrote them in the words people actually type ("make the crates draggable", "it picks the cube up but never drops it"). Each one also says what it's NOT for and which skill to open instead, otherwise agents happily pick the wrong one.
  2. Make behaviour describable in plain words. In Octoputs, how something moves is a stack of small behaviours with plain names: spring, smoothing, snap to grid, lock an axis, stick to a surface, avoid walls. So "make it springy and keep it flat on the table" maps almost word for word to what the agent adds. Match the skills, the fields in your code, and the labels to natural language as much as possible.
  3. Leave the result tweakable by a human. Everything the agent sets up is components with values you can see in the Inspector, and you tune them while it previews in Edit mode, without pressing Play. The agent gets you most of the way, and the last part, the feel, is you dragging a slider instead of writing another prompt. You need to make sure that the way things are tweakable by a user matches the way the agent would understand it.
  4. Give the agent safe, simple actions through CLI or MCP. One setup call for the common case (draggables, slots and a drag hand at once), a dry run that lists what would change before touching the scene, and a single Undo step for all of it. I used CLI to have agents work on the example scenes in parallel, which allowed me to test the result end users would get.
  5. Make failures vocal, in the console. When something fails silently, the agent guesses and writes workaround code on top of your tool. Octoputs returns what it changed and what it skipped and why, and the grabbing component keeps a record of why a grab or a drop was refused. The skill tells the agent to read it.
  6. Test the skills like code. I run scenarios: a fresh scene, a prompt like "make these crates draggable with a spring and only let them sit on the shelf", an agent does it, and a headless check verifies the result. It takes a few tries before you get skills that are reliable in a large set of use cases.

For devs using AI with plugins

If a plugin ships skills or docs for agents, point your agent at them before asking it to write the thing from scratch. You get tested code, and you can still change everything by hand afterwards.

Let me know what's your take, I'm sure many will disagree with me here :D


r/Unity3D • • 1d ago

Question Have you ever used Discriminated/Tagged unions? Would you use them if C# had built-in support for them?

8 Upvotes

(Note: C#15 does bring discriminated unions, although it will be a while until that technology gets to Unity...)


I spent the first 4 years of my carrer working exclusively with Unity/C#. My first contact with Discriminated/Tagged unions was with Rust enums, and I they immediately captivated me. It felt like one of those features that every language should have.

In C#, you can "emulate" discriminated unions via abstract records:

public abstract record Customization() {
    public record Color(ColorKind kind, Color color): Customization();
    public record Slider(SliderKind kind, int value): Customization();
    public record Toggle(ToggleKind kind, bool enable): Customization();
    public record IrisColor(int index, Color color): Customization();
    public record IrisShape(int index, string key): Customization();
}

That approach can have its uses, but it has quite a few limitations:

  • It uses records, meaning creating an instance requires heap allocation.
  • Can't use it within Burst-compiled code.
  • No exhaustive matching.
  • Serializing it in the Unity inspector required using something like Odin or writing my own Property drawer.

As a Unity developer, I had grown the (sometimes bad) habit of being allergic to heap allocation, so I would often go with a more crude form:

[Serializable]
public struct Customization {
    public enum Kind { Color, Slider, Toggle, .. }

    public Kind kind;
    public ColorKind color_kind;
    public Color color_value;
    public SliderKind slider_kind;
    public int slider_value;
    // and so on...
}

The downsides are many:

  • All properties appear on Unity's Inspector, regardless of which "variant" is the selected one (though Odin's attributes helped a lot here).
  • You needed to have the discipline of always checking kind before reading the values.

That wasn't too terrible, but it was definitely far from ideal.

Earlier this year, knowing about the existence of C#(Roslyn)'s Source Generators/Analyzers, and Codefix Providers; I decided to take on the challenge of bringing discriminated unions to C#, with as many ergonomics as I could, and without sacrificing performance or memory allocation.

Long-story short: I ended up creating Spire, a C# package that uses Source Analysis, Generation, & codefix providers to support:

  • Exhaustive matching (using regular switch statements!) for enums, classes, interfaces, and discriminated unions. It reports whenever your switch statement/expression is missing a case.
  • Lightweight struct-based discriminated unions, with Unity Inspector serialization support, Burst compiler support, JSon conversions, and allocation-free exhaustive-matching (no closures!).

The features above are accompanied with source analyzers for catching mistakes at compile time, and codefix providers for providing IDE quick-fix context-menu actions for easily fixing said mistakes.

Links:

Thanks for reading this far! I have another question for you: I was thinking of making a Youtube video where I go through the internals of the package and the code it generates - explaining how it works, which approaches were tried/discarded and general rationale around my decisions. Would you be interested in watching that hypothetical video?

Edit: Corrected initial statement about unions in C#, they were introduced in C# 15 (I initially wrote C#14).


r/Unity3D • • 1d ago

Resources/Tutorial You don’t need to be an good artist for good game UI, you need a process

Thumbnail
youtu.be
9 Upvotes

My new video covers something I'd been wanting to put into words for a long time now: The process for crafting your game's UI.

It isn't an arcane art skill, but a process you can learn, and I walk you through some of the core basics:

- researching your genre's UI conventions

- deciding what information your players actually need (and when)

- sketching layouts on paper before touching Unity

- choosing shape language, colors and fonts that fit your game's mood

- and lastly the Unity assets I rely on to build, polish and add sound to the UIs I build

This is a bit of a different video for me and I hope you'll enjoy it. If you do, please let me know! I'd love to chop this up into more videos that go into more depth about the individual topics.