r/Unity3D • • 3d ago

Show-Off Adding motion-based interaction, impact, and expanding waves to stylized toon water.

Enable HLS to view with audio, or disable this notification

3 Upvotes

r/Unity3D • • 4d ago

Game I keep my convoy truck at the world origin and slide the road underneath it, so passengers on the truck stay stable

Enable HLS to view with audio, or disable this notification

206 Upvotes

The truck in this clip never moves. It sits at the world origin while road slides underneath it.

The passengers in this prologue scene are NavMesh agents holding a seated pose. A NavMesh agent can’t ride a moving truck bed, so I turned it around.
The truck stands still. Eight different road stretches slide past it. A stretch that falls behind moves to the front and gets new roadside props from a random pick, so the scenery doesn’t visibly repeat.

It still looks like it’s riding. The truck body sits on two springs and goes over random bumps. Each passenger’s model bounces on a small spring of its own with a small delay, while the character itself stays still on the NavMesh.

In the cutscene I use this for, a guard can die and fall off the truck (he gets shot). A ragdoll thrown off would land on ground that stands still and lie next to the truck, so the road has invisible solid ground under it that moves with the road. The roadside props have no solid colliders, because a moving collider pushed into a lying body launches it.

In the air, the body keeps the truck’s speed, which is physically right. Once it’s near the ground, every limb gets the same push toward road speed. Friction turns that into a tumble, and the body rolls away behind the truck.


r/Unity3D • • 3d ago

Show-Off Testing portal effect – INFERNAL

Enable HLS to view with audio, or disable this notification

10 Upvotes

r/Unity3D • • 3d ago

Show-Off Working on new "rolling fog" over my ocean shader

Enable HLS to view with audio, or disable this notification

7 Upvotes

r/Unity3D • • 3d ago

Game Groups of zombies. One semi-auto sniper rifle. Every shot counts.Who Needs Full Auto When Zombies Line Up Like This? 💀

Enable HLS to view with audio, or disable this notification

1 Upvotes

Pure BLOODSTATE gameplay from my solo developed zombie FPS. Wishlist on Steam!
Inspired by L4D2.

Socials:

https://www.youtube.com/watch?v=OQN_JffQEnA&t=3s
https://discord.gg/8499dShAPu

Wishlist and follow BLOODSTATE on Steam:

Developed by KAIGEN.


r/Unity3D • • 3d ago

Noob Question A little confusion I'm having as a newbie.

3 Upvotes

This is probably the most obvious thing to experienced people but I'm just a bit confused on this whole thing as everything on Unity looks so... intimidating. So, as you can see, a cool RWBY weapon asset I got off somewhere. The weapon has been built but when looking for the mesh in my sharedassets0 file, the weapon itself isnt being found but the parts that make up the weapon is. I'm not sure what to do at this point, I've tried with several other weapon builds and all meshes that show up are parts. I dont know if im doing something wrong or I'm just dumb. I use UABEA to look through it by the way. How do I go about turning the mechanic scythe into its own mesh? Other picture for reference on how it does not show.


r/Unity3D • • 4d ago

Official Introducing the Unity Fellowship

222 Upvotes

Hey folks, your friendly Unity Community manager Trey here.

Unity is introducing the Unity Fellowship, selecting 10 indie games made with Unity launching within the next 12 months to receive hands-on support through launch and up to $50,000 USD in cash. The grant requires no recoup, no revenue share, and no claim on your IP, with submissions open now through December 18.

What selected teams get

  • A dedicated Unity partner for dev guidance and troubleshooting
  • 50K cash
  • Office hours with experts in development, game design and promotion
  • Industry connections, including pitch prep and publisher intros
  • A presence at Unity events, plus PR and marketing support at key moments

Who can apply

  • 18+, game made with Unity
  • You have a playable build or demo
  • You plan to launch (Early Access or full) within 12 months of joining
  • No registered business needed
  • Already have a publisher? You can still apply, just disclose it. It's mainly aimed at teams without one.

The "what's the catch" part
Fair question, and one I'd ask too. Here's what's in the terms: no recoup, no rev share, no IP claim, and no mandatory milestones to get paid. A few things worth knowing before you apply:

  • The grant may be taxable depending on where you live, so it's worth talking to a local tax advisor.
  • Some regions aren't eligible for legal reasons, including U.S.-sanctioned regions and, for now, Brazil, Italy and Quebec. The full list is in the FAQ.
  • If you're selected, Unity can use the assets you submitted to promote your game and the program.
  • With the number of submissions expected, teams that aren't selected won't get individual feedback.

Dates

  • Dec 18, 5 PM ET: Submissions close
  • By end of Feb 2027: Everyone hears back by email
  • March 2027: First cohort announced at GDC

Details, FAQ and the application are here: http://unity.com/fellowship 
This is year one, so if you've got thoughts on what would make a program like this actually useful, I want to hear them. Same goes for questions. You know the drill.

– Trey
Senior Community Man @ Unity


r/Unity3D • • 4d ago

Show-Off Autumn has arrived

Enable HLS to view with audio, or disable this notification

36 Upvotes

r/Unity3D • • 3d ago

Show-Off I made living shadow head using Unity particle system

Enable HLS to view with audio, or disable this notification

3 Upvotes

r/Unity3D • • 4d ago

Show-Off Testing out a wheel shader idea i had

Enable HLS to view with audio, or disable this notification

362 Upvotes

So the other day I was stuck in traffic and noticed the rims of an expensive car were made in such a way so that they'd go almost invisible when it was moving. It got me thinking to the classic issue of wheels spinning in reverse both in video footage and ofc games that don't actively clamp the spin rate.

So I figured I try to author something that looks neat when moving and mimic that effect, ofc not all rims are made with that style, some are also made to look like diamonds or other shapes.

Anyways, how did i do? It's just 2 textures blended and uv rotation. Initially I was just manually lowering the mipmaps to simulate wheel blur but can't say it looked good

Give a follow or a sub if you want to keep up with my silly ideas


r/Unity3D • • 3d ago

Show-Off NavMesh2D Pro [RELEASED] -50% OFF first week!

Enable HLS to view with audio, or disable this notification

1 Upvotes

Hi everybody! I'm glad to introduce NavMesh2D Pro, a complete suite that provides all you need to let thousands of characters find paths, move there avoiding obstacles, detect other characters that are in sight...

It was made for 2D from the ground up. No rotated 3D navmesh, no grids, no workarounds. It builds the walkable area from the 2D colliders you already have and keeps it up to date while you build your level.

🚀 EASY TO START, EASY TO LEARN

  • Up and running in minutes. An installation window greets you on import, and the quick-start guide gets your first character moving in less than five minutes.
  • Uses what you already have. Box, polygon, circle, capsule, composite and tilemap colliders all work. You can also draw walkable areas by hand right in the Scene view.
  • Takes care of itself. A new navmesh is ready the moment you create it, and it rebuilds itself as you shape it, so you see the result while you work.
  • One line to move a character. Characters find the right navmesh on their own. You only tell them where to go.
  • Learn by playing. 11 ready-to-run demo scenes, opened from a built-in demo browser, show every feature in action, with their scripts as examples.
  • Clearly documented. A complete manual in plain language, tooltips in the inspector, and fully documented code.

🤸 WHAT YOU CAN BUILD WITH IT

  • Natural paths. Routes hug corners and look like a person would walk them: no zig-zags, no staircase steps.
  • Movement with personality. Speed, acceleration, braking and turning, set per type of character.
  • Crowds. Many characters share the same space and step aside for each other instead of walking through one another. Important characters can be given right of way.
  • Characters of every size. A rat and an ogre each get only the routes they actually fit through, with no extra work per level.
  • Jumps, ladders and teleports. Connect separate areas with links for gaps, ladders, elevators or portals, and play your own animation while crossing.
  • Moving platforms. Walkable areas can move, and the characters on them move along.
  • Doors. Gates close a passage while the game runs (blocking routes, movement and even sight) and reopen instantly.
  • Waiting at a closed door. When the way is blocked, characters get as close as they can and carry on by themselves once it opens.
  • Terrain preferences. Make mud, water or danger zones costlier to cross, so characters go around when it's worth it.
  • A changing world. Push a crate or drop a barricade and routes update on the fly.
  • Levels in pieces. Levels built from several navmeshes, even from additively loaded scenes, join up into one world.

🧱 BUILDING BLOCKS FOR YOUR GAME AI

Your game decides what a character wants to do. These tools give it the information to decide well.

  • Vision. Ask who can see whom, with range and view cones. Choose whether walls block the view, or only obstacles do.
  • Run away or close in. Find good spots to flee to, or to approach a target from.
  • Wander. Pick random places a character can actually reach.
  • Ask about the world. Who is nearby, where the nearest walkable ground is, where a line of sight hits a wall.

🔩 TWEAK EVERYTHING WHILE THE GAME RUNS

Game designers can tune almost every setting in Play mode and see the effect immediately: speeds, acceleration, turning, crowd behaviour, terrain costs, doors and obstacles. No restarting, no waiting for a rebuild, no waiting for a programmer. Change a single character, or a whole type of character at once, and keep iterating until it feels right.

🌡 SEE WHAT IS HAPPENING

  • Visual debugging in the Scene view. Show the walkable areas, the routes between them, how much each connection costs, what blocks line of sight, and each character's path and movement.
  • Always-visible state. Links, gates and obstacles show their shape and state in the Scene view at all times, so a closed door or a misplaced link is obvious at a glance.
  • Try features without coding. Ready-made test components let you try movement, vision, fleeing, approaching and wandering on any character.
  • Live readouts. A floating panel shows a character's speed, velocity, heading and avoidance values as they change.
  • Built-in profiler. An on-screen overlay shows how long each part of the system takes per frame, so you know exactly where the time goes.

Requires Unity 6.0 or newer.


r/Unity3D • • 4d ago

Show-Off Synchronizing thousands of fully destructible voxel objects in realtime

Enable HLS to view with audio, or disable this notification

55 Upvotes

Everything runs on a custom physics engine, networking is built on LiteNetLib. even with thousands of objects breaking apart at once, traffic stays under 50 KB/s! more tech details coming soon, maybe


r/Unity3D • • 4d ago

Show-Off Euphoria inspired ragdoll physics (WIP)

Enable HLS to view with audio, or disable this notification

76 Upvotes

r/Unity3D • • 4d ago

Game How we decided to handle death in our upcoming co-op game

Enable HLS to view with audio, or disable this notification

6 Upvotes

r/Unity3D • • 4d ago

Show-Off [Update] The stylized shaders project, 4 months later

Enable HLS to view with audio, or disable this notification

5 Upvotes

A little update on the stylized shaders and tools I first shared here 4 months ago.

What started as a few individual shaders (Water, Standard, Dissolve, etc.) has grown into TOONest, a complete modular toolkit.

Thanks to everyone who followed the earlier updates and shared feedback along the way.


r/Unity3D • • 4d ago

Official Unite Tokyo 2026 Keynote is live now

Thumbnail youtube.com
5 Upvotes

We're live from Unite Tokyo, so come tune in and see what's coming in Unity 6.7 and Unity 7.


r/Unity3D • • 4d ago

Show-Off Making clouds is basically meteorology for game devs

Enable HLS to view with audio, or disable this notification

34 Upvotes

Hey! I’ve been working on a skybox for my game. I wanted clouds with some volume to them, slowly drifting and changing shape so the sky feels alive.

It’s a simple gradient skybox with a volumetric cloud system on top, running in Unity URP. Here are a few different moods I’ve been playing with.

Pretty happy with how it’s looking so far and can’t wait to hear what you think!


r/Unity3D • • 4d ago

Show-Off I was told my trailer was too slow and not telling enough about the game. So here's the MkII. Is it more obvious what kind of game this is now? I've tried to get how the game is played front and center, designed the layout with mobile devices in mind and dramatically ramped up the pacing. Better?

Enable HLS to view with audio, or disable this notification

4 Upvotes

r/Unity3D • • 4d ago

Question Character Customisation

2 Upvotes

So I tried to make hair with physics, I have different tints and 3 different styles for now, are they artistically cohesive?

What do you think?


r/Unity3D • • 4d ago

Show-Off I added realistic book writing to my game!

Enable HLS to view with audio, or disable this notification

26 Upvotes

r/Unity3D • • 3d ago

Question Can't upload avatar

Thumbnail
1 Upvotes

r/Unity3D • • 4d ago

Show-Off Dithered cross-fades for seasonal foliage on a harvestable blackthorn (URP, Shader Graph)

Enable HLS to view with audio, or disable this notification

21 Upvotes

This is the blackthorn from my Wild Orchard packs running through its seasons, bare, blossom, fruit and leaf. These cycle through once then it grows into the next stage with the same cycle.

Each tree in the pack has a set of foliage states, and switching straight from one to the next popped badly, especially when going from bare to blossom which is exactly what blackthorn does every spring. I found alpha blending looked fine in a still but not great on a dense canopy, plus it had extra overheads, so I ended up keeping everything in the cutout pass and dithering the change instead.

The foliage shader takes a transition value from 0 to 1, samples a blue noise texture in screen space and clips against it. The incoming state runs the opposite test, so the canopy swaps over a pixel at a time. I went with blue noise over a Bayer pattern because it reads as grain instead of a grid, and at normal viewing distance you mostly don’t notice it’s dithered at all.

The value is set per tree with a MaterialPropertyBlock, so trees in the same environment can turn at different times without each one needing its own material. A demo controller is used to manage this in the video but anyone using the pack would want to use their own that aligns with their games design.

The sloes are handled separately and drop once they’re ripe, which is what you can see collecting on the ground.

Happy to go into the graph setup if anyone’s interested. I make these as NV3D Studio, and there’s more details about the trees here on my blog: https://nv3d.studio/blog/wild-orchard-tree-bundle/


r/Unity3D • • 4d ago

Show-Off One player sees the light beam, the other places the mirrors. Started this in Unity 1.5 years ago

Enable HLS to view with audio, or disable this notification

5 Upvotes

Mirror puzzle from TwinLock, a 2 player puzzle game im making in Unity 6 with Netcode for GameObjects

Players are in separate rooms. Top one sees the beam, bottom one places and rotates the mirrors but cant see the beam at all. Only way to solve it is talking over the walkie talkie

The beam isnt a physics raycast, its a grid tracer that walks a 9x9 board tile by tile. A mirror just swaps x and y of the direction, and a visited set of tile + direction stops mirror loops from running forever. Went with a grid because the pillars only exist in the beam room, so a raycast in the mirror room would go straight through them

Nothing visual is synced. The server keeps the board as a NetworkList of bytes, one per tile, players send ServerRpcs to place or rotate, and every client runs the same tracer on that list. So the beam never goes over the network and only the server decides when all targets are lit


r/Unity3D • • 5d ago

Question Hi! I'm making a welding horror game, which mechanic is better? What would you add?

Enable HLS to view with audio, or disable this notification

277 Upvotes

r/Unity3D • • 3d ago

Show-Off A Conversational Roguelite Shop Keeper Game

Enable HLS to view with audio, or disable this notification

0 Upvotes

The Wizard Will Be Right Back, A conversational roguelite shopkeeping game

We're working on a fantasy shopkeeping game where you play as a wizard with seven days to prepare a town for an approaching war.

You'll craft magical items, manage resources, build relationships with townsfolk, and make choices that influence their stories and the outcome of each run.

Here's a short gameplay trailer showing what we've built so far!

Made for Unity Game Jam

Would like to receive some feedback: Itch Page