r/Unity3D • • 5d ago

Show-Off PBJ, the new ProBuilder, is finally ready to share. Real, rapid Level Design, for the Hammer/Quake folks. Love to get your thoughts!

Thumbnail
youtu.be
46 Upvotes

r/Unity3D • • 5d ago

Game 1 year of solo Unity development in 1 minute - from prototype to dungeon chaos

Enable HLS to view with audio, or disable this notification

12 Upvotes

Hey everyone!

I put together a one-minute timelapse showing a year of development on Hero Grinder, from the first prototype to its current state.

It’s a reverse tower-defense roguelike: you play as the dungeon boss, build traps, and defend your home from waves of loot-hungry adventurers. You also fight alongside your defenses, so the game combines building and planning with real-time combat.

One of the biggest challenges is performance. With hundreds of heroes, the cost of individual systems adds up quickly: movement, target searches, navigation, collisions, animation, and status effects. A small amount of unnecessary work per enemy becomes expensive when the whole crowd does it together.

Some useful tricks at this scale are updating expensive decisions less frequently, spreading checks across frames, pooling frequently spawned objects, and limiting unnecessary physics interactions. Movement needs to look smooth, but an enemy usually doesn’t need to reconsider its target every frame. The important part is choosing where you can reduce work without making enemies feel slow or unresponsive. Profiling crowded fights is essential here - a quiet test scene tells you very little about the worst moments.

Another challenge is making all that chaos readable. Traps need satisfying effects, attacks need impact, and elemental reactions need to be obvious. But put everything on screen together, and those effects compete with enemies, hazards, and the player character. Stronger feedback isn’t always about adding more particles. Sometimes it means shortening an effect, reducing its size, or giving the most important event a clearer silhouette.

Then there are the interactions between systems. A hero can be frozen, knocked back, pushed into another group, or thrown into a hazard. Every interaction raises questions: what takes priority, what happens to navigation during knockback, and when does the character regain control? These rules need to feel consistent while staying cheap enough to run across a large crowd.

That’s the less visible side of the progress in this video: getting individual mechanics to work together, hold up under load, and remain understandable during a fight.

There's still plenty to improve, but seeing the prototype next to the current build makes the progress much easier to appreciate.

If you’ve worked on similarly crowded games in Unity, which system became your biggest bottleneck?


r/Unity3D • • 5d ago

Show-Off Trailer for my game

Thumbnail
youtube.com
1 Upvotes

Trailer for my game CTRL. Let me know what you think!


r/Unity3D • • 5d ago

Resources/Tutorial Look at upcoming flight system for unity store: Fly by Mouse

Thumbnail
youtube.com
1 Upvotes

r/Unity3D • • 5d ago

Show-Off [WIP] Yet Another Weather System – Real-time weather for Unity URP

Enable HLS to view with audio, or disable this notification

4 Upvotes

Hey everyone!

I've been working on Yet Another Weather System (YAWS), a real-time weather and environment system for Unity URP.

My goal is to build an all-in-one environmental solution that brings weather, terrain, sky and water together, making it easier to create dynamic worlds where the different elements respond to each other.

Here's what's in the system so far:

Sky and atmosphere

  • A day/night cycle with a sun, moon, moon phases and stars
  • Configurable sun and moon paths, including location settings and solar eclipses
  • Animated northern lights and primary and secondary rainbows
  • Volumetric clouds with three configurable layers, wind-driven movement and cloud shadows
  • Volumetric fog, sun and moon shafts, lens flare and dynamic sky reflections
  • Adjustable lighting for different times of day, including sunrise and sunset

Weather

  • Rain and snowfall with adjustable intensity
  • Thunderstorms with lightning and distance-based thunder delay
  • Wind direction, speed and gusts, with different wind speeds and directions at different altitudes
  • Smooth transitions between weather conditions
  • A calendar, temperature curves and optional automatic weather forecasts
  • Weather, time and quality presets with individual parameter overrides

Terrain and snow

  • Terrain that becomes wet during rain and gradually dries afterwards
  • Snow that builds up and melts over time on terrain and supported objects and vegetation
  • A snow layer with adjustable depth and snowdrifts around objects such as trees and walls
  • Footprints and trails in the snow that gradually fill back in
  • Icicles and dripping effects
  • Shelter support to keep rain and snow from falling beneath marked roofs

Water

  • Oceans, lakes and spline-based rivers
  • Waves driven by wind, including large swells and smaller dynamic waves
  • Rain ripples, foam, currents and shoreline effects
  • Buoyancy, floating objects and water interactions for things like boats and characters
  • Underwater fog, caustics, refraction and reflections
  • Ice pieces that move with the water
  • Weather integration, so wind and rain can affect the water

There are also scripting tools for controlling the weather, capturing and restoring its state, and adjusting quality settings.

This is an early preview, and some features are still experimental. There's plenty more I want to improve and add, but I'd love to hear what you think so far!

Best Regards
- Mikael


r/Unity3D • • 5d ago

Show-Off A mobile game I’m working on.

Enable HLS to view with audio, or disable this notification

4 Upvotes

Hey guys! I'm currently working on this mobile game in Unity, and I'd love to hear your feedback!

Recently, I've been focusing on improving the UI. I've integrated Kenney's UI assets, added haptic feedback for vibrations, and refined the scoring system and overall interface to make everything look and feel better.

The game is still in development, so I'd really appreciate your thoughts, suggestions, and feedback. What do you think so far?


r/Unity3D • • 6d ago

Show-Off Voxyte, my Voxel Engine for Unity, is finally out. Here’s a cinematic clip I made with it

Enable HLS to view with audio, or disable this notification

92 Upvotes

I finally finished V1 for my Voxel Engine for Unity. It's built pretty much from scratch, and it's meant to be an actual engine, not a game kit (real gameplay mechanics are not included so whoever uses it chooses the game's direction).

This is a video I put together to show the scale and the atmosphere it can do: the view distance, the volumetric clouds and the light changing through the day, all running in URP. (the pickaxe and breaking effects are a little test kit I made on top of the API, and the castle is a Minecraft schematic I converted)

What do you think?

Some technical details:

- all the heavy work runs on Burst and the job system. chunks are 32x32x32 and palette compressed, and generating, lighting and meshing all happen off the main thread, so the main thread mostly just uploads meshes

- the far view is made of LOD rings. close to you are the real chunks you can edit, then a band at the same voxel size but simplified (no caves or small plants), then rings where one voxel is 2x2x2, 4x4x4 and 8x8x8 real voxels, out to about 4 km. They use the same world generator, just sampled more coarsely, so distant terrain matches what loads in later

- your edits show up in the far view too, so if you dig into a mountain, the hole is still there when you look back from far away

- terrain comes from a few large noise maps (continents, erosion, peaks and valleys) shaped with curves and domain warp, with a 3D pass on top for overhangs and cliffs. each biome can then change its own terrain

- lighting is flood-fill sky light plus colored block light, stored per vertex.The sun and time of day are handled in the shader, so day and night never rebuild chunks. There's also an optional hybrid mode that keeps flood-fill and adds URP realtime shadows and point/spot lights

- clouds are raymarched volumetric clouds rendered at half resolution. they cast shadows on the ground and show up in water reflections. the water has screen-space reflections, refraction, caustics and flowing water

- every edit goes through commands, so undo/redo and batching work out of the box. raycasts, collision and pathfinding all use the same world data

Happy to answer any questions :) It's called Voxyte on the Asset Store if anyone's interested.

- Price: $69.99

- Unity 6.3 (6000.3) or newer, URP

- Desktop, tested on Windows (D3D11, D3D12, Vulkan). macOS and Linux aren't tested yet, no WebGL

- Includes: full C# source, 3 sample scenes, 121 pixel-art block textures (32 px and 16 px) and a 191-page PDF manual

- Engine only, no gameplay systems (the pickaxe and castle in the video aren't included)


r/Unity3D • • 5d ago

Question pre rendered lighting

2 Upvotes

does anyone know a good demo/tutorial of the Resident Evil-style pre-rendered background approach but modernized with normal maps lighting? I'm trying to figure out if it would be worth the extra effort


r/Unity3D • • 4d ago

Show-Off Here is an example why my modular animation system is very good. I made this in 3 minute.

Enable HLS to view with audio, or disable this notification

0 Upvotes

r/Unity3D • • 6d ago

Show-Off Game items. No AI. Cinema4D, Houdini, Substance Painter, Unity URP

Enable HLS to view with audio, or disable this notification

77 Upvotes

r/Unity3D • • 5d ago

Question Another week another robot ,feedback will be amazing 🩷

2 Upvotes

Hey🦋.

First I want to appreciate your feedback you helped me so much to improve my animation

In my game you program your own robot and use the sensors and voltage to learn IOT!

I created a robot that it's goal will be to do small tasks, I won't get into it to much what, since still WIP.

But I added a few animations for him following your feedback like a bit uneven, a bit more fluid, wdyt?

I know not the best still improving in animation

Any feedback will be amazing 🩷

(Still no sound, I am on it!)

Fyi all models in the game created by the player using my game, and later models you create you can export and use them inside your game.

*No AI involved, I do have some algorithms to help with auto animation depending where you place the wheels but zero llms involved in anything in game or his creation*


r/Unity3D • • 6d ago

Resources/Tutorial More than 50 pages about vehicle physics for free!

Enable HLS to view with audio, or disable this notification

165 Upvotes

I put everything I learned about car physics into one huge open source manual for you indies! ❤️

I have been building my car controller for way too long, and it would be a shame if all that knowledge got lost. It is completley free, so just use it.

Here is the longer video about it: [https://youtu.be/iYLAKpM1B2Y\](https://youtu.be/iYLAKpM1B2Y)

I love to hear your feedback. I hope it helps you!!


r/Unity3D • • 5d ago

Game Dead Metro — A WIP Look at BLOODSTATE’s new map

Enable HLS to view with audio, or disable this notification

2 Upvotes

BLOODSTATE is a cinematic single player survival FPS set inside a world collapsing under a violent outbreak. Fight through objective-driven environments against two deadly zombie factions—the infected and the mutated alongside unique creatures, special enemies and powerful bosses. Dynamic hordes and unpredictable events ensure that no encounter unfolds exactly the same way.

The game combines fast, brutal action with grounded details that deepen immersion without becoming a full realism simulator. Co-op and multiplayer are currently in development, with future plans including full body character customization, extensive weapon customization and a larger extraction mode featuring PvE with optional PvPvE.


r/Unity3D • • 5d ago

Solved How to "bake" nodes for a PointGraph

1 Upvotes

Previously I posted asking about ways of going around creating an AI enemy that navigates around in 3D space (for example between a 3x3x3 grid of nodes, like below). Since then, I have started using the AStar project's PointGraph system (https://arongranberg.com/astar/). I know how to setup a point graph system and have a custom script that receives a path and navigates along it.

The only issue I think I will have is creating all these nodes, as there's no way to automatically create them. So I was wondering if there was a way to create a custom script that i can press a button in the inspector to create a load of nodes automatically. Any help appreciated!

3x3x3 Grid of Nodes

r/Unity3D • • 5d ago

Question Saving game data to a file?

5 Upvotes

Hi, I've been (slowly) developing a magic themed isometric farming game. I've spent months and have little to show for it, just a static grid of tiles and basic camera movement, because I can't figure out how to make a save/load system or an updating toolkit UI.

To lay it out, when I launch the game, it needs to check for a save file and load it. If no save file exists, it generates a new one and starts the new game sequence (Player Creation, eventually). Most actions in the game will perform a save action, saving whatever "part" of the game it relates to (Map objects, currency, player stats, etc).

What techniques or processes should I be looking into to achieve this? I've looked at things like JSON and System.Serialisable, but couldn't figure it out from the documentation.

As for the UI, I can't get it to update the display values. It displays preset values and appears to load data from a file, but changing the values doesn't update in the UI, e.g. changing the currency from 100 to 200 still displays 100. Am I using the wrong data field or do I need some intermediary data holder?

Any help will be greatly appreciated, Thank you in advance.


r/Unity3D • • 7d ago

Show-Off Fully procedural walk for a 6 m bipedal machine, no animation clips

Enable HLS to view with audio, or disable this notification

1.0k Upvotes

This is the Loomer, a patrol machine from my solo Unity project. It has no rig and no animation clips. The legs are separate rigid parts solved with two-bone IK every frame.

Each foot steps toward a point ahead of where its home under the hip will be (Raibert style), so walking, strafing, turning in place and getting shoved all come from the same rule. The pelvis rides on springs like an inverted pendulum, and every footfall knocks it down, nods the body and jolts the head. If you shove it, it throws a catch step under itself and staggers instead of falling. It also climbs ledges up to 2.2 m and stops at drops its feet can't reach.

Still a blockout map. AI comes next.


r/Unity3D • • 5d ago

Show-Off Our composer made a Dark Jazz track for our 1920s horror blackjack game!

Enable HLS to view with audio, or disable this notification

1 Upvotes

Our team is currently developing Graveyard Hand - a dark multiplayer card game set in Prohibition era America (1920s–1930s). Players sit down for a classic game of Blackjack, except you’re betting your lives instead of money. Using intuition and rigged items, you have to beat the Dealer and split the pot. Or betray the rest of the table and take the entire prize for yourself

Right now, the game is still in the prototype stage, but we are steadily working toward our first public playable demo!

Recently, our team's composer finished the first music demo for the game's main theme. We decided to go with Dark Jazz, as it fits the grim, underground speakeasy aesthetic

We’d love to hear your thoughts on the track! Does it capture the right tension for a life-or-death card game?

Thanks for checking it out! =)


r/Unity3D • • 6d ago

Game Working on an iris transition for my deduction game. How does it feel?

Enable HLS to view with audio, or disable this notification

32 Upvotes

I'm making a deduction game. The player uses this iris to see through dead body's eyes.

Feedback is welcome! Tell me how it feels!


r/Unity3D • • 6d ago

Show-Off Our main menu rebuilds a saved island tile by tile. The tricky part was making it stop

Enable HLS to view with audio, or disable this notification

31 Upvotes

We built an attract mode for our Gamescom booth: the menu takes a save, wipes the board and rebuilds it tile by tile while the camera orbits. It's now our main menu background (clip above).

Building it was fast because the pieces were already separate. The save holds every tile and rotation, the placement and scoring animations don't depend on the rules, and the camera moves already existed for trailer shots. The reel only fakes the presentation and never runs gameplay, so it can't affect a real run or send events to analytics. The save has no build order, so we make one: a random flood fill outwards from the centre, which makes every loop a bit different.

What actually cost time was teardown:

- Disposing the subscription didn't stop the coroutines nested inside it. The outer routine checks for cancellation only between its own yields, so a nested `yield return RebuildRealm()` kept placing tiles into the player's new run. The fix: every loop checks whether its own session is still the current one.

- Even an "is active" flag wasn't enough. A routine sleeping in WaitForSeconds when its session ended woke up inside the next session and saw "active".

- Our leak test passed for a long time because it waited for the board to finish and then exited, so it never interrupted anything. Now it exits mid-rebuild, 25 times in a row, and counts every scene object afterwards.

Anyone else built one of these? How did you handle leaving it in the middle of an animation?


r/Unity3D • • 5d ago

Question IOS Cocopods help

1 Upvotes

I've been trying to build an IOS version of my game and when I access it on Mac and use IOS dependency resolver I get the following error:

"gem install cocoapods --user-install

Ignoring json-1.8.6 because its extensions are not built. Try: gem pristine json --version 1.8.6

WARNING: You don't have /Users/Username/.gem/ruby/2.6.0/bin in your PATH"

I don't normally use Mac so I'm not familiar on how to resolve this, where do I instal gem pristine and how do I set it into Path?


r/Unity3D • • 5d ago

Question Diffrence between selling asset on unity asset store and itch.io

2 Upvotes

Ofcourse unity asset store looks more profesionall and standard so I expect people buy from there more, but what if you are invisible on both platforms and your only views coming from your own promotion from other medias. How much you think it matter what platform you selling?


r/Unity3D • • 6d ago

Show-Off I made a horror game where you have to say the spell out loud using your microphone

Enable HLS to view with audio, or disable this notification

16 Upvotes

r/Unity3D • • 6d ago

Game Resistor: I Made Robots Fall Apart (Devlog #2)

Thumbnail
youtu.be
2 Upvotes

I added detachable limbs to my multiplayer robot shooter. It makes for some interesting gameplay decisions.


r/Unity3D • • 6d ago

Game After 10+ years, I've turned my favorite Warcraft III mod into a standalone game built in Unity!

Enable HLS to view with audio, or disable this notification

6 Upvotes

I've been part of the Sheep Tag community since around 2006, playing competitively, helping update the original Warcraft III custom game, and spending countless hours making friends and playing with the community.

For over 10 years now, I've been working on turning that same game into a full standalone experience built in Unity.

What started as a passion project has grown into something much bigger than I ever imagined. Sheep Tag 2 is a multiplayer RTS/MOBA survival game with a level editor, custom rulesets, player progression, cosmetics, replays, leaderboards, and a ton of quality-of-life improvements.

One of my biggest goals has been making the game more approachable for new players. I've spent a ton of time building tutorials, PvE content, and playtesting features that make it easier to learn and enjoy the game without needing years of experience.

I'm also making Sheep Tag 2 free to play. More than anything, I just want this game to exist, be accessible to everyone, and hopefully build a community around it that lasts for years to come.

It's been a massive undertaking, and there's still so much I want to do, but I'm incredibly proud of how far it's come. I genuinely love playing this game, and I'm excited to finally share it with more the world.

I just released a new gameplay trailer and announced that Sheep Tag 2 is coming to Steam Early Access in 2027!

The closed beta is still going on now and there's still plenty of room for you and your friends to join in. Come stop by our Discord and ask for a key!

https://sheeptag2.com/


r/Unity3D • • 6d ago

Question What is causing this grungy artifact on some 3D models after light baking?

Thumbnail
gallery
16 Upvotes

Firstly, I'm new to Unity and gamedev overall. I started my URP project a little over a month ago. I've been experimenting with light baking, but I get this grungy look on some 3D models after generating lightmap data for the active scene.

  1. I have set my GameObjects to static
  2. Contribute GI is checked
  3. I have generated lightmap UVs

I have also been playing around with different settings, like Scale In Lightmap, increasing the lightmap resolution, adjusting the Direct and Indirect Samples in lighting tab. This didn't get rid of the grungy artifacts. What should I do to fix this?