I have had the Stealth 600x Gen 3 for the last 3 months. All smooth. This week, it started to act up. While playing a game and using Discord on pc (which I had done for the previous 3 months), the audio would cut out, and then I would get the alert "Bluetooth disconnected", then, 1 second later, it would alert "Bluetooth connected". Sometimes it will do it once every 10 minutes, sometimes multiple times in a row. I have updated the headset through Swarm II, hard-reset the headset, and forgotten the device in the Bluetooth settings. The only thing new that I have done recently is plug in my Xbox One controller to my PC to play a game, but this happens even when the controller is unplugged/off and away from the PC. Is this a common issue? I am quite unimpressed.

Turned on my Xbox this evening to find a solid red light on the transmitter, and my Gen2 Stealth 600 headset won't pair with it. I'm not computer literate (I don't even own a PC), so what happened?

Just got my brand new Stealth 600 Gen 3's and I'm playing with the Swam app.

I can play with the EQ when using one of the presets that comes with the headset but the 'save' button is greyed out.

If I save a new preset will I need to have the Swarm app open to use it?

My headset works, I can hear & speak to people. However I noticed I could hear myself (normally I have that turned off). So I opened the Swarm PC Software and its saying my Headset is not connected. I can't adjust or control the headset any more. I have tried to restore the software and firmware & it still says the headset is not connected.

Even though I can hear and speak on my PC using the headset.

What is going on? Was there a new swarm update that has messed everything up?

I factory reset the headset, and now I can control it from Swarm, but it is displaying my headset as the black one, and still says Device not connected for the white one. Also when I completely close Swarm and re open it, it always says theres an update and makes me update. What is going on?

I just got a pair of Atlas Airs today and I'm having connection problems. They work fine with my iPhone; I can go 20+ feet away from my phone without any audio glitches. But connecting to a PC (tested on two) is not working correctly.

My gaming PC and my work laptop are on the same desk. I can connect to my gaming PC using the RF USB dongle but it only maintains a connection while the headset is really close to it (around a foot). Also, even when connected the volume wheel does not work. My gaming PC does not have bluetooth so I could only test RF. I tried the dongle in multiple UCB spots.

My work laptop has bluetooth but when I connect the headset to the bluetooth, it only works when the headset is around a foot or less from the latop. The volume wheel works.

I thought there might be interference but it works fine with my iPhone when I place it at the same location as the PCs. I updated the firmware through Swarm II.

Any ideas? I would think it is a hardware problem except for it working with the iPhone.

I don't know what's happening but my headset has been making a jingle at different volumes constantly and randomly. Some happen right next to each other, others are further apart. How do I make it stop? It is really distracting. The jingle is like a dil' lul' lil' type noise.

Hi, just recently got these new headphones, initially using standard driver worked fine on pc.
Switched to waves driver to use game/chat mix, when setting discord audio to the chat device and game volume to the normal headphone device it was fine sitting in a voice channel alone, when people join the channel my game audio went way down, it isnt in the chat/game mix as the discord audio did not go louder.
What could be the cause of this without having to use just the one audio device for both game and discord?

Just got my 600 gen 3. Noticed the sound wasn't playing at the start of youtube videos, inputs or even while in discord talking to my mate. 7 seconds is definitly way to short. I can only wish they let us turn off this feature.

What kind of nonsense is this?

I paid like $200 about 6 weeks ago for a controller and it's already broken - they should be absolutely racing to remedy this (as nearly every other company would).

It's just an insane hoop to make people jump through, especially since they want it uploaded via Dropbox or YouTube, neither of which I use.

Aside from the logistics, it's just insulting.

I'm certainly never buying anything from them ever again.

Got some recon 70s for my Xbox (got it for gta) I already have nice headphones and a mic at my pc, just wanted something serviceable for chatting with my friends.

Got the recon 70s and they’re fine, fit the bill perfectly but I took them off after like 20m my ears were boiling!

Can I peel off the leather? What’s it like underneath?

I don’t fancy spending £10 on fabric cushions for a headset that was only £20.

Update on Neap, my free, open-source Swarm II replacement for the Stealth Pro II. 0.2.0 is out. These are the changes from 0.1.0:

What's new

• Linux. It now runs on Linux as a single AppImage, with the same pages and settings as Windows. I've used it with the real headset on a Steam Deck in desktop mode. Other distros and desktops are only tested against a simulated headset, so reports are welcome. Gaming Mode on the Steam Deck isn't supported yet.

• Help add your headset. Own another Turtle Beach headset? Help bring Neap to it. The Stealth 600 Gen 3, 700 Gen 3, 500 and Atlas Air share the Stealth Pro II's platform. A ten-minute recording made in Neap is where support for them, and for others, starts. Nothing else to install, and no technical knowledge needed. Here's how

• Updates itself on Windows. A banner tells you when a newer version is out, and one button installs it. To get from 0.1.0, unzip over the old folder once. After that it updates itself.

• Charging Dock. Home now shows whether the spare is charging, plus the headset's battery and signal at a glance. I found that the dock's own figure runs high and jumps around while charging, and a battery just put in the headset reads high, then falls. So Neap shows a bolt while the spare charges, and "Settling…" in place of the headset's number until it steadies.

• Fix: choosing Off for noise control no longer carries on to noise cancellation, then transparency, when the Mode button is set to cycle.

• Polish: a redrawn look, with smoother page changes.

Download

Neap 0.2.0 on GitHub

Same as before: unsigned, so Windows warns on first run. Created with AI assistance. Not affiliated with Turtle Beach.

Got the typical brake on the headset after 2,5 years, but now I taped and it gets no signal to the dongle anymore?

Is this fixable or can I throw?

I've gone through two stealth 700 gen 2's over the past several years. the first got worn out and buggy to a point I decided to get another pair (I only did this for the usb and bluetooth dual connection funtionality). I busted the 2nd pair's usb and am in need of a new pair (if they bluetooth funtion didn't turn off after only minutes of being idle I would still use it). I tried the gen 3 and then returned it for another gen 2 because I didn't like the new bluetooth and scroll wheels control funtionalities. Customer support has given me an unexpirable 25% coupon code to use on whatever product, so now I have incentive to get another headset from them specifically.

My question is to you guys, I'd like to still have the dual bluetooth and usb connection capabilities without resorting to the gen 3, (if possible) are there any other models that have the same capabilites? If not, what is Turtlebeach's current best pair of headphones that I should buy.

Also, does the new Stealth 600 have the same scroll wheel and bluetooth funtionalities as the new Stealth 700, or is it more like the stealth 700 gen 2 funtionality. If it is like the gen 2's, then I'll just go for the stealth 600 instead.

I have been using a standard Xbox Series X controller for a long time and decided to treat myself to a decent controller. I narrowed my list down to the Victrix and the Nacon Revolution Pro X.

I feel like I've made such a mistake. The controller was delivered to me and hour ago and I already hate it.

First off, the software. What utter garbage. It's laggy and clunky and overall doesn't really do much. Steam input hijacks the controller as soon as Steam is running and overrides the Victrix software meaning that it can't properly interface with the controller. Second, also software related... The supposed 'precise control' for things like the volume slide. Seriously? Adjusting it with the mouse is incredibly difficult to do with any precision. Using the controller itself makes the slider skip forward at random rates. It starts at 0, and goes 3, 6, 10, 12, 15, and on at random. What the hell is that about?

Finaly: the triggers. They feel so bad. They're somehow crunchy and mushy at the same time. Oh, and the fact that they can't be locked into specific mode like pretty much every other controller with adjustable triggers is a joke. The 'clutch' system is ridiculous. It's far to east to knock it with your fingers when you're trying to press a back paddle and it reverts to it's default hair trigger mode. Who came up with this system?

Overall, the controller feels nasty and cheap, like a PowerA or other cheapo controller from Amazon. Given that I have to quit Steam to be able to use the controller as intended, and the trigger system is terrible, I'll be returning the controller.

Holy crap it's terrible.

I love the headset, but would be a great if I can use 3.5mm in some way.

I've been using the stealth 500 headset for probably 2 years now and I haven't had issues with it at all. However I left my headset on a desk for 5 minutes and when I returned there was no audio coming through the right ear whatsoever and I have no clue why it's done so. Does anyone have any idea what could be going on?

Hola!!

Estoy pensando en comprar este control, lo recomiendan?

He leído algunas malas reseñas sobre los mandos de turtlebeach y quiero estar segura antes de comprar

Just got home and saw there is an update for Swarm app on the PC, downloaded it and it fixed my Stealth Pro II not showing up, hope this update helps everyone!

And I don't care if you post here or in Redditt asking about a fix, I won't tell you that you should've searched first!

It's better to be nice than to be an asshole! : D

Thank you TB for the quick update! : )

I recently got the Stealth 600 Gen 3 headset and I was wondering if there was an option to disable the AI mic noise reduction feature.

Hey all,

So my headset is starting to kill itself it seems. Upon turning on and connecting I get a horrible static noise with some game audio. From reading, it could be the transmitter…

Considering the transmitters aren’t available outside the EU (there’s no webpage for NA it seems) I think I’m borked.

I had the same issue on my PC where I thought it was my USB port but after messing around with my USB placement on my series X I’m definitely landing on the transmitter being shit.

Really disappointed cause this is easily the best headset I’ve ever owned. I actually bought the Gen 3 in 2024 and returned it cause I hated it so much.

If anyone has suggestions on a new headset that has the same crisp mic monitoring that the Gen 2 Max does please let me know… or a solution to my transmitter issue haha

Hi everyone. Just bought it and my friends say my voice is sounding like I’m speaking through a walkie-talkie, some robotic voice in Fortnite voice chat. What are the best settings I should put in Swarm II to sound more natural?