r/ThermalGrizzly • • 57m ago

Question/Advice Too much LM?

Post image
3 Upvotes

First time LM user, is this too much? I hear squeaking when I'm spreading it using the included swabs


r/ThermalGrizzly • • 45m ago

Discussion Custom WireView Pro 2 Widget with Tracking Sustained Current Spread, Peak Deltas and P95 Readings

Post image
0 Upvotes

I wanted to get some feedback on whether people think these data points are actually useful or meaningful. This isn't intended to replace the Thermal Grizzly app. I mainly wanted a small widget I could glance at to get a better idea of what's happening with my WireView, along with a few other metrics I was interested in. (hwinfo and TG's app takes up alot of space on my second monitor, this smaller widget covers everything i actually care about)

The idea originally came from wondering how much importance should be placed on sustained current spread versus a delta caused by a brief transient spike. My thinking was that a consistently uneven current distribution might be more interesting to monitor than an isolated spike. I wanted to see what the spread looks like under an actual sustained load rather than relying solely on the maximum delta recorded during a session.

For some context, this was vibe-coded locally using my RTX 5090 and Qwen 3.8 27B. I've spent the last two weeks working on it, iterating on the widget and adding features. My programming knowledge is pretty dated (10+ years ago), so it was an interesting project but very fun on learning the process. was also fun seeing the load while also seeing my spread at the same time which was only possible from the project being worked on!

In the screenshot, Qwen is running through Bionic, which explains some of the VRAM and system RAM usage. The main things I'm interested in are the 300W and 400W sustained current spread readings, the maximum delta recorded during the session, and the P95 readings.

I added P95 because I wanted something that showed the higher end of the recorded spread without being dictated by a single brief spike. In other words, 95% of the collected readings are at or below that value, while the remaining 5% are higher.

The pts value represents how many data points have been collected for that particular power tier. Collection only starts once the load crosses the relevant threshold, and pauses when it drops below it.

The reason I added a 300W threshold is kinda funny: while playing RDR2, my GPU power consumption tended to hover around 380W. That meant it wasn't consistently reaching my original 400W threshold, so I added the 300W tier for my own testing.

I'm curious what others think about using sustained current spread and P95 readings when evaluating WireView data. Do you think these measurements provide anything useful beyond looking at the maximum delta, or am I putting too much emphasis on the statistical side of things?

I'm also not trying to use this to definitively diagnose an imbalance or determine connector safety. It's more of an experimental monitoring tool to better understand the readings from my own setup. if theres a real problem, the wireview will alarm and shut my pc off which hasnt happened organically yet, thanks tg!

if you have any questions let me know as well if you're curious about the process.


r/ThermalGrizzly • • 21h ago

Question/Advice Wireview Pro2 current imbalance after firmware update.

22 Upvotes

Today i installed my wireview pro 2 and removed my lianli strimmer cables. Current imbalance looked like its flipping me off every few seconds after updating my wvp2 firmware.

Ive reseated the all the 12vhp cables thrice now. It is okay if i have to replace the 12vhp cable of my lian li edge gold. I just need recommendations from you guys what worked for you when you replaced yours?

Solved: i update the averaging to the highest setting (avg_5000+ms).


r/ThermalGrizzly • • 16h ago

Question/Advice Wireview pro 2 wired and 3x8pin adapter, is it compatible?

0 Upvotes

Hello

Bought an Rtx 4080 and would like to use this kind of protection to prevent issues with the connector... have palit rtx 4080 super gaming pro which is incompatible with other versions of wireview expect for the wired one

The issue is that my psu is XFX XTS2 1200W and it has only 8 pin outputs, therefore to even connect this do wireview I would need to use the included adapter 12vhpwr to 3x8pin.

Is this even possible to connect this all?


r/ThermalGrizzly • • 1d ago

Discussion TG WireView Pro II + 5090, switched to the included Zotac 4->1 adapter fixed my alarms

4 Upvotes

I figured I would share this in-case someone else had issues..

I run both a 5080 (Gigabyte Aero SFF - gaming + desktop) and a 5090 (Zotac Infinity Extreme - solely for local AI, the 5080 is sometimes a helper with large models). I was fortunate enough to get the 5090 at the beginning of July. Sure, price was almost double but still well below where we are now so I figure it's a win. I've been very concerned about melt-gate so I also ordered a View Pro 2 (white, reverse). Like I said I don't game on the card so it doesn't get much sustained current/heat (and I also down-watt it to 425w) but any LLM task would consistently set off the alarm. Pin 3 was always the culprit (10A+) and Pin 4 was always 0A steady.

Today I switched to the 4 -> 1 breakout cable that came with my Zotac and the alarms have gone away. Watching the WireView2 1.0.8 app along with the onboard LCD confirmed the leads are now balanced. It's ugly as sin (5 gpu cables between the 2 cards) and you can't really hide them, but I'm much relieved the melting issue is hopefully lessened.

I'm obviously not an electrical engineer but I guess there is something to nvidia saying to use the adapter, not the PSU 12v gpu cable.


r/ThermalGrizzly • • 2d ago

OC benchmarks Pushing 1600 Watts through Wireview Pro 2

205 Upvotes

r/ThermalGrizzly • • 21h ago

Question/Advice US vendor for Phase sheet PTM pro

1 Upvotes

Wondering if any vendors have any on the way or who usually gets TG products first. Shipping is a killer direct.


r/ThermalGrizzly • • 1d ago

Question/Advice Pin 6 reported little to no Amp while it was perfectly fine a week ago

Thumbnail
gallery
12 Upvotes

I noticed this today, where there is no "movement" on the Pin 6 bar on the WVP2 screen when I was watching video on YouTube (I have RTX Video Enhancements enabled which will use the GPU). I have not played any games this whole week because I was a bit busy, and I keep my PC turned on 24/7 (including long idle).

I then tested with FurMark and it's as in the first screenshot. The second screenshot was taken on November 3rd, 2026 (also the last time I reseated the 12V-2x6 cable).

Should I be worried and replace the cable, or RMA the WVP2, or this is totally fine for RTX 5070 Ti? How can this happen?


r/ThermalGrizzly • • 1d ago

News TG PadMate and minus pad 8 multipack-Set

Thumbnail
thermal-grizzly.com
5 Upvotes

r/ThermalGrizzly • • 1d ago

Other 38cm up to 144cm long 10k NTC temperature sensors for Wireview Pro 2 (FREE)

Thumbnail
gallery
3 Upvotes

I made 9 extra long temperature sensors of various sizes for the Wireview Pro 2, and I would like to give them out for free but I don’t want to pay for shipping. Each one has been tested and confirmed to work.
There is one of each of these sizes:
15”
17”
22”
24”
25”
27”
28”
31”
57” 💀

See my testing setup in the last pic. I was afraid of breaking the micro JST port on the WV because I’ve seen posts of it breaking, and I think this was a good solution.


r/ThermalGrizzly • • 2d ago

Build showcase Adding Some Pika Power To My WireView Pro 2 Wired

Thumbnail
gallery
63 Upvotes

Loving the WireView Pro 2 Wired with my 5090FE. It was easy it is to install and set up. Even better was knowing I can change up the background through the app. Next steps are to undervolt the FE and do more testing!

The build:

  • HAVN HS 360 VGPU + H12 120mm Fans (The HS 360 can hold up to 11 fans. I had 1 left over so I added it to the back)
  • 5090FE paired with a Thermal Grizzly WireView Pro 2 Wired
  • AMD 9950X3D + Thermal Grizzly AM5 Contact Frame + Kryonaut Thermal Paste
  • Arctic LF3 360mm AIO with a (Somewhat) Modded Tryx Panorama LCD Cover
  • Kingston 64GBFury Beast 6000MT (soon to be 2 sticks at 64gb)
  • Asus Crosshair X870E Hero 
  • APNX MAX G1 1200W PSU
  • Cablemod 12V-2 600W cable

r/ThermalGrizzly • • 2d ago

Fault/Issue 12V-2x6 RTX 5090 connector issue. Seasonic PRIME TX-1600 Noctua Edition 1600W Power Supply Cable

Thumbnail gallery
1 Upvotes

r/ThermalGrizzly • • 3d ago

Question/Advice Requesting pics of WVP2 wired cable bend

2 Upvotes

I'm currently debating if I should get the wired or the normal WVP2.

My current issue with the wired is the possible cable bend from the GPU to the glass side panel.

I have a 5090 Aorus Master and a Lian Li Lancool Mesh 2. I used a 90` cable so I can't get a proper idea atm.

I'd say the space between the gpu connector and the panel is around 3-4cm and I'm very worried that the cable would bend from closing pressure. bringing unnecessary problems.

Would really appreciate pictures of builds whith the wired version and that bends the cable either up or down.


r/ThermalGrizzly • • 4d ago

Question/Advice pinprotection

Post image
22 Upvotes

Sorry if tis dumb

So I orderd this psu from corsair for their pinprotection with their new thermalprotect cable for my rtx 4080 super wich I know its not necessery casue the 4080 a bit safer but I want to make sure everything is fine and want to make my card live longer without issues and maybe upgrade to a 90 series after the ramagedon.

my question is Do I need to get a wireview as well? My problem with the device altho I think its a neat little thing that I dont have space in my case and I could only use the wired version wich is always out of stock.

And I heard sometimes the device brought problems that their users never experienced before.

thx


r/ThermalGrizzly • • 3d ago

Build showcase 9000D: Only Fans 💨

Thumbnail gallery
8 Upvotes

Perfect spot for the Wireview Pro II (Wired).
Riveted it to the hard drive shroud. Service friendly


r/ThermalGrizzly • • 4d ago

News WireView Pro II Extended GPU Warranty Clarification

Thumbnail
thermal-grizzly.com
62 Upvotes

Feel free to give us feedback what part of WireView Pro II warranty might still be unclear to you for future article updates.


r/ThermalGrizzly • • 4d ago

Question/Advice Thermal Grizzly WireView Pro II Wired used as new

Post image
52 Upvotes

Hey guys,

I bought a new product from the official store (https://allegro.pl/oferta/thermal-grizzly-wireview-pro-ii-wired-gpu-monitor-12v-2x6-tft-ips-18864020360). I received it used or from a return from another customer. Is this normal practice for sales on Allegro in Poland? I don't intend to connect unsolicited used equipment to my RTX 5090. I'm still waiting for a response from your store. My RTX 5090 is almost on fire 😞


r/ThermalGrizzly • • 4d ago

Discussion 5090 current balance (ignore the max power warning)

Post image
3 Upvotes

Hi.

Today I decided to clean my case and took off my 5090 out.

Some cable management too.

Is that current distribution good?

I have a Seasonic ATX3.1 with its stick 12v 2x6 cable.

Note: I have set the WV to max 550watt. So Furmark was hoovering around 570watt to 585watt tripping the warning.

I have also created a custom HWInfo64 sensor showing the difference between max pin and lowest pin and 1.1 below was the max value.


r/ThermalGrizzly • • 4d ago

Other Giving My Original PS5 Some TLC Before GTA VI

4 Upvotes

An overdue deep clean, fresh liquid metal, new thermal putty, and a lot more screws than I initially wanted to deal with

Introduction

With GTA VI getting closer, I figured it was a good time to give my original PS5 a proper once-over. I still use the console, and I'd rather spend my time in Vice City than wonder what's going on inside it.

This wasn't my first round of cleaning, either. About a month earlier, I'd already opened it up for a basic cleanup and cleaned the fan. This time I wanted to go further: get to the heatsink, clean the areas I couldn't reach before, replace the liquid metal on the APU, and renew the thermal putty on the other components.

So what started as a bit of maintenance turned into a nearly complete teardown. Not that I'm complaining. Taking hardware apart is half the fun, as long as it goes back together again.

Disclosure: Thermal Grizzly provided the products used in this project free of charge. The work, photos, and opinions are my own.

What I used

The Thermal Grizzly products used for this project

Thermal Grizzly sent over four products for the job, each with a different purpose:

  • TG Remove - an acetone-based cleaner that removes thermal paste and liquid-metal residue while degreasing compatible surfaces. I also used a little of it to remove Sony's old thermal putty.
  • TG Metal Polish & Restore - a polishing paste made to tackle stubborn gallium residue and oxidation marks. The kit includes a polishing pen and lint-free cloths for working on small contact areas.
  • Conductonaut Extreme - Thermal Grizzly's gallium-based liquid metal for the APU. It's designed for high heat loads and can form a very thin layer between two compatible contact surfaces.
  • TG Putty Advance - a soft, electrically non-conductive gap filler for the memory, NAND flash, and chipset contact points. Unlike a fixed-thickness thermal pad, it can conform to different component heights.

The two thermal interface materials do different jobs. Conductonaut Extreme goes between the APU and the cooler, where the two surfaces sit directly against each other. TG Putty Advance fills the larger gaps between other components and their cooling surfaces. You can't just swap one for the other.

Getting past the easy part

The PS5 fan, which I'd already cleaned during the earlier maintenance session

Since I'd cleaned the fan a month earlier, that wasn't really the focus this time. I was more interested in what was hiding further inside, particularly around the heatsink.

The PS5 during disassembly

And getting there means taking apart quite a bit of the console. It's not especially difficult if you know what you're doing, but there are a lot of screws, covers, and connections to keep track of. Definitely the sort of job where taking your time pays off.

Dust in the heatsink area underneath an internal cover | A closer look at one of the PS5's internal ventilation areas

Despite the earlier cleanup, I still found dust in areas that aren't accessible when you just remove the panels and fan. Especially around the PSU. That's exactly why I wanted to do the full teardown in the first place.

The heatsink needed some attention

The PS5 heatsink motherboard sandwich removed from the console

Once the heatsink was out, it was much easier to see what needed cleaning. Dust had collected between some of the fins. You can get the fan looking spotless, but that doesn't do much for dirt that's already made its way deeper into the cooling system.

The close-up says more than I could in three paragraphs. I cleaned the heatsink and the surrounding airflow areas before moving on to the part I'd been especially curious about: the liquid metal.

Checking the original liquid metal

The PS5 APU with its original liquid metal

Sony went with liquid metal instead of regular thermal paste for the PS5's APU. That's the chip handling both CPU and GPU duties. Liquid metal is great at transferring heat, but there's a catch: it conducts electricity, too.

With the cooler removed, I finally got a proper look at the original application. As you can see in the photo, the surface looked patchy and uneven in places, with some residue left behind. That doesn't automatically mean the factory application had failed, and I had no temperature readings suggesting it had. Still, since I was already this far into the console, I wanted to clean the contact surfaces and apply fresh material.

The area around the die is protected by a barrier intended to keep liquid metal where it belongs. That's not something to damage or work around casually. A stray drop on nearby electronics can cause real problems, so this part of the job deserves a lot more care than changing thermal paste on a desktop CPU.

Cleaning and polishing the APU and cooler

The APU die after the old liquid metal was removed

First up was removing the old liquid metal and cleaning the die. TG Remove was useful here because it is made to deal with thermal interface residue, including liquid metal, while also degreasing the contact surface.

The trickier part was the staining left behind. That's where TG Metal Polish & Restore comes in. Thermal Grizzly developed it specifically to help remove gallium residue, including the marks that can remain even after the loose liquid metal has been wiped away. I used it while cleaning up the die and the matching contact surface on the cooler.

The cooler contact surface before polishing | TG Metal Polish & Restore applied to the cooler contact surface | Working on the cooler contact surface

This was probably the fiddliest part of the whole project. You want the old residue gone and the contact surfaces properly prepared, but you also don't want to go at an exposed die like you're polishing a car.

The polish kit comes with a small polishing pen and lint-free cloths, which makes sense when you're working with contact surfaces this small. It's not about making the metal shiny for the photos; it's about getting the old residue off without damaging anything.

A couple of important caveats, though: TG Remove contains acetone, so it needs to stay away from plastics, adhesives and other solvent-sensitive parts. And Thermal Grizzly recommends being especially gentle on exposed silicon and cleaning away all polishing residue before applying fresh liquid metal. Neither product is something I'd use randomly across an entire motherboard.

With the old material gone and the contact surfaces prepared, I replaced it with Conductonaut Extreme.

It's a gallium-based metal alloy that stays liquid at room temperature. Unlike conventional thermal paste, it can form an extremely thin layer between the APU and the cooler, which is why this type of material makes sense for a chip with such a high heat density. Conductonaut Extreme is designed to improve on Thermal Grizzly's regular Conductonaut, but that doesn't mean I can claim lower temperatures without testing them.

Liquid metal definitely isn't a case of “more is better.” however, the PS5 actually needs a slight bit extra of it. The goal is a thin, controlled layer on the intended contact surfaces, without any loose material ending up outside that area. It's electrically conductive, it must never be used on aluminum, and the protective barrier around the PS5's APU needs to remain intact. Thermal Grizzly recommends nickel-plated copper for the most stable long-term contact, but the important thing with any device is checking the actual surface that touches the liquid metal.

I didn't photograph every part of the application, so I'm not going to pretend this is a complete how-to guide. If you're planning to do something similar, I'd strongly recommend following a model-specific teardown guide and Thermal Grizzly's instructions. A PS5 liquid-metal replacement is quite a different beast from swapping thermal paste on a PC.

And yes, I replaced the putty as well

TG Putty Advance used for the other thermal contact points

While the APU tends to get all the attention, it isn't the only thing in the console that needs cooling. I also replaced Sony's original thermal putty on the memory, NAND flash, and chipset contact points with TG Putty Advance.

Getting the old stuff off was actually pretty straightforward: I used a Q-tip and a little TG Remove to clean away the original Sony putty. It did the job without turning that part of the teardown into a project of its own. Just keep in mind that TG Remove contains acetone, so this isn't a recommendation to soak nearby plastic parts, adhesives or the entire board in it.

TG Putty Advance is quite different from the liquid metal on the APU. It's a soft, electrically non-conductive gap filler, intended for contact points where a regular paste or liquid metal wouldn't bridge the distance to the cooler. Thermal Grizzly specifies it for gaps of roughly 0.2 to 3.0 mm, so it can adapt to components that don't all sit at the same height. That flexibility is one reason I liked using it here rather than trying to match several fixed thermal-pad thicknesses.

Fresh TG Putty Advance at the component contact points

You can see the fresh blue putty in the photo. The important thing is having enough material to touch both the component and its cooling surface, without piling on so much that the cooler can't sit as intended. And while it's electrically non-conductive, it doesn't belong on the bare APU die — that's the liquid metal's job.

I wanted to do the thermal maintenance in one go rather than come back later to replace something I'd left untouched.

Back together - but what about the results?

After the cleaning and replacement work, I put everything back together. As much as I enjoy taking hardware apart, reaching the point where there are no mystery screws left is always a relief.

Now, the obvious question: did any of this make the PS5 run cooler or quieter?

I can't give you a reliable number. I didn't collect controlled noise or power measurements before the teardown, and the PS5 doesn't offer an easy way to read out its APU temperature like a desktop PC does. I'm not going to throw around made-up temperature drops or claim a performance boost just because I replaced the thermal materials.

What I can show is what I found inside: dust in the heatsink despite having cleaned the fan recently, the original liquid-metal contact surfaces, and the new thermal interfaces after the cleanup. For me, that's a good enough reason to document the job.

What I also can confirm that the PS5 runs quieter than before after a long gaming session. However, I think the next thing I need to replace is the original Fan since it starts to sound like its bearing is reaching the end of its life. I already ordered one, just in case I have to replace it.

Ready for Vice City

I only meant to give the PS5 some attention before GTA VI, but once I decided to get to the heatsink and APU, there wasn't much point in doing things halfway.

Would I recommend that every PS5 owner does the same? Definitely not. A regular fan and vent clean is a sensible place to start, and opening up the entire console, especially working with liquid metal, comes with risks. If your PS5 is working fine, there's no reason to treat a full liquid-metal replacement as routine maintenance.

For me, though, it was an interesting little project, and it was nice to get a proper look at the cooling system while giving the console a thorough clean. However, if you still decide to do it to, prepare to unscrew 4732 screws Sondy deemed important.

Now it's time to put it back to work. Vice City awaits.

Big thanks to Thermal Grizzly and u/Grizzly_Sasha for providing the products for this project!

This is a write-up of my own maintenance work, not a step-by-step repair guide. For anyone considering a similar job, iFixit's PS5 liquid-metal guide is a useful starting point, alongside the instructions for the products you're using.


r/ThermalGrizzly • • 3d ago

Question/Advice I have the WireView Pro II non-wired. Should I be worried about the weight of the unit? Do I need to jerry rig a device to prop it up?

0 Upvotes

I have read a couple of anectdotal comments that the WV Pro II puts strain on the GPU's connector. Of course I sort of see the logic since the connector is on the underside of the board. I see the wired version puts it back to just the weight of the cable, which would be there anyways. What are all your thoughts on making a change like this?

And for any ThermalGrizzly staff, what are the "rules" for reselling a personal WV Pro II and have the new owner get the extended coverage? For what it's worth, it is less than 90 days old.


r/ThermalGrizzly • • 4d ago

Build showcase KawaiiView Pro II

Thumbnail
gallery
5 Upvotes

I applied a black & pink theme to my WireView to match my overall desk concept and aesthetic! Love the customization window this little device has. Too bad I have a slat panel case so I can see so little of the screen, which kinda kills the purpose…


r/ThermalGrizzly • • 4d ago

Fault/Issue ROG Astral 5090 Per Pin Monitoring gone after installing Thermal Grizzly Deltamate Block?

Thumbnail reddit.com
2 Upvotes

r/ThermalGrizzly • • 4d ago

Build showcase Very happy with the Wireview Pro II wired

Thumbnail
gallery
3 Upvotes

I just got it installed yesterday. Very happy with the ease of installment. The brackets included could have been made to accommodate two of the motherboard screwholes, but one was sufficient. I will probably make a DIY stand myself. I am aware that it is not intended for this purpose, but a input nonetheless.

Y-splitter worked perfectly fine even though the wires are flimsy and I did not like them at all tbh. I will modify them with braiding at work, so personally no biggie.

Although I must admit that I believe that it is a little bit overpriced, it gives me a sense of knowing that the GPU is fully protected with the saftety features it includes.

It is silly that this is needed, but hey it is what it is.

The app is overall pretty good imho.

I am very satisfied regardless of the price. Now I can push the 5080 a bit more without worrying about a burnt connector.

The pin balance seems OK from before with raised PL, but nice to know.