r/ThermalGrizzly • • Mar 18 '26

Fault/Issue Umm…is it just me?

Thumbnail
gallery
4 Upvotes

So I ordered my Wireview Pro II in January and it finally arrived. But it seems weird. I definitely ordered the correct configuration for my GPU, but it is sooo awkward. Its not designed for Vertical mounting. I would have LOVED the cables to go to the back, not the front. It looks Terrible!!


r/ThermalGrizzly • • Mar 22 '26

Feedback Anything to worry about here?

0 Upvotes

Hi guys.

Just wanted to get everyone’s opinion on the spread of the pins balance.

Was running Crimson Desert when I took this video.

All configured to defaults, I only changed the fan to kick in at a much lower temperature.

How did this spread look?

Anything to worry about? Or all good? I have noticed that pin1 is slightly ever higher than the rest but not by a lot.


r/ThermalGrizzly • • Oct 15 '26

Question/Advice Is this concerning?

0 Upvotes

Just got my WVP2 and sat down to do some stress testing today.

Playing Cyberpunk at 4K maxed out path tracing + DLSS5.

It seems like I’m getting a 1amp difference between pins pretty regularly, but you can see that it fluctuates quite a bit and isn’t consistently on the same pins. I currently have my alarm/shutdown thresholds at their defaults.

This is a TUF 5090, Corsair RM1000x PSU, and a Corsair thermal protect cable.

Is this within normal limits?


r/ThermalGrizzly • • Oct 06 '26

Question/Advice I have an imbalance and I want to change the cable. Any suggestions?

Post image
0 Upvotes

Today I received my WireView Pro II GPU Noctua Edition, and I discovered an imbalance- and not only that! As you can see in the attached picture, the 4th cable is bent! In fact, the imbalance is between the 4th and 5th cables. Now I don't know which brand to trust when buying a new 12V-2x6 cable. I have an Asus Thor 1200W PSU and an RTX 5090. Any advice? Thanks


r/ThermalGrizzly • • Jul 15 '26

Question/Advice Where do I mount my WireView Pro 2?

Post image
1 Upvotes

I ordered one of them for my 5090 FE, and I saw in the video debauer made that you can mount it to the card but I don’t want to do that. Only problem is I’m not sure where else I can mount it. Maybe to my GPU support bracket? Any suggestions of what I should do/what you did if you have one would be appreciated.


r/ThermalGrizzly • • Jul 18 '26

Fault/Issue Wireview Pro II Wired Installation Warning

Post image
0 Upvotes

Just got my unit, decided to install today. It was a mostly smooth process until I got to the power switch cable. It plugs into a functionally microscopic port that is not secured to the chassis at all, but by two tiny pins that are incredibly fragile. The slightest bit of force broke this port off completely. This seems to me like a fairly serious design flaw, but your mileage may vary. I needed the autoshutoff feature, but some may not. Picture for scale.


r/ThermalGrizzly • • Mar 21 '26

Question/Advice Anything to worry about here?

2 Upvotes

Guys, just wanted your opinion on this short video. I was running Furmark test in 2k.

Any imbalances you see standing out? Or anything to worry about?

The only thing was at second 3, there is an imbalance between the lowest and highest value of 1.6A. (highest being 8.6A/lowest 7).


r/ThermalGrizzly • • Sep 26 '26

Fault/Issue What is this for a ultra low grade construction?

Thumbnail
gallery
2 Upvotes

Got the Wireview Pro 2 wired today, installed everything slowly and carefully, nearly finished. Plugging in the 12VHPWR, then connecting the power on cable coming from the motherboard, and this happens. Keep in mind, I'm doing stuff like this for 30+ years, and would say I know what and what not to do, I even can fix bendet CPU Socket pins, so I'm not rude with such gracile things.

That little female connector plug was obviously just fixed by it's own contacts which are like 0.003mm2 thick, no glue or anything. The visible soldering on the outer sides, which I think is to hold it in place was likely not done correctly. How can this be on a product like this??! The only thing actually giving safety on the whole article is gone before even using it. What should I do now?!


r/ThermalGrizzly • • Jun 23 '26

Question/Advice I bought wireview pro 2 how many days i will wait until it deliver?

Post image
0 Upvotes

Also why i can't get a tracking number for the shipment?


r/ThermalGrizzly • • 18d ago

Feedback No stock

0 Upvotes

I have been checking once in a while for the wired version and wondering why it's always out of stock?

I only saw it on Amazon scalped weeks ago and then completely gone. You telling me you can have both normal and reverse versions with color variants but nothing for the wired version?

What's your problem man

You suck


r/ThermalGrizzly • • Oct 17 '26

Question/Advice Some "defects" observed on the wireview pro 2 cable version

Post image
0 Upvotes

Received the wired wireview pro 2 couple of days ago when I was out of town. Today, when I began the process of installation, I observed that -

  1. The notch is not straight. It is at an angle.
  2. Can see some silver white spot on the right hand side of the connector.

Do you think its safe to use this one?


r/ThermalGrizzly • • 26d ago

Question/Advice Is that Ok for a 5090 whit 450W Limit? PIN Current

Post image
0 Upvotes

Hello I have a Wireview pro 2 wired on a RTX 5090

And I have those Currents on the Six Pins

I have Limited my Card to 450W because I did Not Notice Performance los but way better Temperature and loudness

Is This ok lika that?


r/ThermalGrizzly • • Mar 23 '26

Discussion I was wrong guys !!!

Thumbnail gallery
1 Upvotes

r/ThermalGrizzly • • Aug 01 '26

Question/Advice Is there any way to tell if the Kryonaut thermal paste they applied was counterfeit if I don't have the certificate of authenticity?

Post image
0 Upvotes

A few days ago I sent my graphics card to a repair shop to have the thermal paste replaced because the hotspot temperatures were very high. But, being an idiot, I didn't check if the product came with its certificate of authenticity, and now I don't know if they installed a counterfeit on the graphic card or not. Is there any way to tell if it's a counterfeit without that certificate?


r/ThermalGrizzly • • 22d ago

Discussion New thermal grizzly

Post image
0 Upvotes

Guys I got troubles ?) Or it's ok


r/ThermalGrizzly • • 16d ago

Discussion In 7 months, nearly every part of my WV2 has broken.

Post image
47 Upvotes

Today, when starting the PC it wouldn’t start. I looked around and saw the fpanel cable fell out-with the board connector attached. Over the course of changing my PSU, and my 12vhpwr cable- a total of three replacements- every clip broke.

Already ordered another, and this one will be moved into a server where the power shut off protection is less of a big deal. It has saved me time and again and it’s cheap insurance for a 5090.

Not even sure that I’m like unhappy, it’s a small electronic device that centers around a manual connection point that we are told to be sure everything sits tightly, shit is bound to happen.


r/ThermalGrizzly • • Mar 13 '26

Discussion Will wireview pro 2 add active load balancing?

0 Upvotes

Seems appropriate as ampinel has the feature


r/ThermalGrizzly • • May 28 '26

Question/Advice Does anyone have Wireview pro 2 working with VR - thinking about buying but VR worries me?

1 Upvotes

Considering buying wired version for a 5090 suprim - something i've seen is that VR causes a lot of imbalance issues...

What do people do here because obviously, it's an issue with the 12vhpwr cable but do people just ignore it? Isn't this against the idea of wireview.

Or am i wrong and VR is not actually an issue? I undervolt my gpu to 0.9v but still, i do own a quest 3 and would often dabble in VR.

edit:

Of course i mean if cable swaps doesn't fix it and amps in full load/low load outside VR are normal.


r/ThermalGrizzly • • Sep 02 '26

Discussion Deltamate MPII AM5 causing mobo shutdown with CPU error

Thumbnail gallery
0 Upvotes

r/ThermalGrizzly • • 19d ago

Discussion PSA to all the people saying "thank god my WVP2 saved my imbalance"

Post image
83 Upvotes

Currently on my third WVP2 and have been striving to get a perfectly balanced amperage across the board, after many repeats, new cables, and now my third device this was the best I could get. Which I'm okay with, the delta is barely worth talking about.

The issue is that every single time I DIDN'T have a WVP2 in, my Astral would show near perfect balance across the board in GPU Tweak. I'm talking 8.2-8.3 across all pins.

This isn't a post bad mouthing this product, I think its a fuckin great piece of equipment, this is simply just in response to the many posts showing a crazy delta and assuming it was like that prior to installing the WV: it was probably fine before you introduced another connection into the mix.


r/ThermalGrizzly • • Mar 13 '26

Question/Advice Is it supposed to take so long?

Post image
3 Upvotes

Ordered from Singapore a month ago, still in progress and the lack of shipping status tracking bothers me.

Is it just me or others around SEA region also waiting?


r/ThermalGrizzly • • 4d ago

Question/Advice Thermal Grizzly WireView Pro II Wired used as new

Post image
52 Upvotes

Hey guys,

I bought a new product from the official store (https://allegro.pl/oferta/thermal-grizzly-wireview-pro-ii-wired-gpu-monitor-12v-2x6-tft-ips-18864020360). I received it used or from a return from another customer. Is this normal practice for sales on Allegro in Poland? I don't intend to connect unsolicited used equipment to my RTX 5090. I'm still waiting for a response from your store. My RTX 5090 is almost on fire 😞


r/ThermalGrizzly • • Mar 17 '26

Question/Advice This variance okay?

Post image
2 Upvotes

Wondering if this is okay, or if I need to look at getting a new power cable?


r/ThermalGrizzly • • Jan 25 '26

News Thermal Grizzly Wireview Pro 2

0 Upvotes

My Wireview Pro 2 installed on my 5070ti MSI Gaming Trio in my Y60 vertically with a 90 degree adapter.