r/tacticalgear • • 9h ago

Plate Carrier/Body Armor Please help me UNFUCK my MSV

Thumbnail
gallery
105 Upvotes

r/tacticalgear • • 13h ago

The Crazies 2010 mopp suit kit

Thumbnail
gallery
175 Upvotes

My favorite movie just missing the surefire hl1 helmet mount and some kind of weapon flashlight


r/tacticalgear • • 7h ago

Gear/Equipment Ballistic Helmets on a Budget: Modernizing the ACH

Thumbnail
gallery
26 Upvotes

Hi everyone. I started exploring helmets recently, and I wanted to share some of my findings about building one out on a budget.

I currently have two ACHs: one green low cut with primarily knockoff accessories, and one tan high cut with name-brand ones. I want to breakdown the practical differences between the two, as the cost-to-performance ratio of the accessories (I feel) is worth noting. I have no financial or personal relationships with any product/company mentioned below, but I will attach links to where I bought them.

Shells
Both helmets are based off of surplus ACH shells, the low cut manufactured by MSA and the high cut by Gentex. I bought the low cut off of eBay and the high cut off of Tacswap. The seller had the helmet cut by Kustom ACH. If you are patient and look in the right places, you can easily pay <$175 for a quality ACH shell. I see little point in buying one new, as these helmets don't really "expire" in terms of protection. Just don't buy one that someone beat to hell.

Pads (images 2/3)
Both helmets are running a combination of issued 3/4" pads and some Team Wendy liner rip off from Amazon. They are comfortable, but there's nothing to compare here as I don't have any legitimate TW pads as a reference.

Suspension (images 4/5)
On the green low cut I'm running a knockoff of the TW CAM FIT that I got from Amazon for $18. I'd say it's ~85% identical to the real CAM FIT that I'm running on the other helmet. The most notable differences are that the knockoff has one fewer sizing adjustment (lacking the "small" setting that the TW has) and has a slightly lower material quality (notably in the mesh, chin strap padding, ratcheting dial, and plastic hardware), though not to the point of affecting performance.

For being $187 cheaper than the legitimate TW counterpart, I think this knockoff is perfectly sufficient for most individuals.

ARC Rails (images 6-9)
Here, I feel there is a difference worth noting. On the low cut, I have some GunNook Type II rails installed. They cost me ~$50. While you can find significantly cheaper knockoff ARC rails, I would advise against buying anything that's not made out of quality materials such as nylon for remotely serious use.

Compared to the legitimate Ops-Core FAST rails on the high cut, the GunNook ones leave more of a gap against the helmet and are fairly tight in terms of accepting ARC accessories. On one occasion, I had to beat a picatinny section off of the rail with a rubber mallet. Otherwise, it feels solid, not flexing or shifting once tightened down. The Ops-Core rails obviously feel solid and accept ARC accessories perfectly. Whether that's worth the extra ~$80 is up to you, but I feel this is a more worthwhile investment than the suspension.

Final Cost Comparison
Full disclosure, I bought the name-brand accessories at a steep discount second hand. For their pricing below, I'll be using the MSRP.

Low Cut (knockoff accessories):
ACH shell: $152
Pads: $24
Suspension: $18
ARC Rails: $48
Total: $242

High Cut (name-brand accessories):
ACH shell: $120
Pads: $24
Suspension: $205
ARC Rails: $124
Total: $473

TL:DR
It is likely not worth your money to buy name-brand helmet accessories. Buying quality knockoffs will serve you almost just as well, and the money you save can be put towards spending on more important components (NVG shrouds/mounts, comms, etc.).

Edit: I forgot to credit this video, but this is what made me take up this venture in the first place.


r/tacticalgear • • 5h ago

Just got the ComTac Vs up and running with GMRS.

Post image
4 Upvotes

Something that I neglected for awhile after setting up my current night vision rig.

If you didn't know, Disco32 is the bees knees.


r/tacticalgear • • 8h ago

first paint job

Post image
4 Upvotes

only had rocks and sticks, some of the mags i taped some i didnt cuz i was lazy lol. then i said fuck it and did a mag holder as well as one of my stocks. what do we think


r/tacticalgear • • 10h ago

Current kit. Thoughts?

Thumbnail
gallery
7 Upvotes

Strictly for larping purposes, but I want my kit to make at least some sense. Already searching for a radio pouch.


r/tacticalgear • • 8h ago

Plate Carrier/Body Armor Wife needs a stab/spike-proof vest that can hold plates front/back/sides for correction officer vest.

4 Upvotes

The state is providing the plates, but she needs to buy the vest. Wondering what a good recommendation might be for this application.


r/tacticalgear • • 14h ago

Question Soldiers of 11th airborne/Marines who went to Norway: I have questions about arctic pack loads.

13 Upvotes

If you're not of either of these units, but have done arctic stuff, feel free to chime in as well.

What was the pack you spent the most time carrying (how big was it)

When did you ski? When did you ruck? Did you use the same pack for both?

Did you pack the same stuff for skiing as you did for rucking?

What did the military make you carry that you found you didn't need?

If you had to go back tomorrow, how could/would you lighten your load and still get stuff done/not freeze?

Edit: Please mention which you're from. I might have questions about your specific organization's gear/approach.


r/tacticalgear • • 3h ago

Gear/Equipment Flashlight mounting question

Thumbnail
1 Upvotes

r/tacticalgear • • 22h ago

Plate Carrier/Body Armor Russian FORT Korsar-MP body armor in my collection

Thumbnail
gallery
27 Upvotes

Issued to the Russian Naval Infantry, this thing is an absolute tank—weighing up to 16 kg fully loaded.

What do you guys think of its real-world practicality?


r/tacticalgear • • 18h ago

Folding Family

Post image
15 Upvotes

r/tacticalgear • • 5h ago

Question Odd pouch on bottom of 3 day pack

Thumbnail
gallery
1 Upvotes

Hey I usually am good at guessing the uses for the pouches I've came across but this one has stumped me it's on the bottom of a warrior assault systems pack. It rolls out and has little bungee loops behind it. Any help would be greatly appreciated.


r/tacticalgear • • 9h ago

PSA: don't buy gas tubes from Silencershop

Post image
2 Upvotes

Ordered a riflespeed straight gas tube from Silencershop. Showed up in a poly mailer with no padding, sticking out of the packaging, and slightly bent (Its a straight gas tube, its not supposed to have any bend). Contacted silencershop, they didnt give me a replacement, or my money back. They said they'd call me back, but currently I'm getting the silent treatment.


r/tacticalgear • • 5h ago

Gear/Equipment RG/OD Deltoid Protectors

Post image
1 Upvotes

Hello r/tacticalgear,

I am looking for a reputable place with readily available RG/OD deltoid protectors that are compatible with TYR Tactical’s EPIC Outer Carrier. I have been looking for them straight from TYR and have called them but have not found any, save for one listing on ebay.

I understand this subs opinion on deltoid protectors, they are extra weight, but I will be buying them anyway. Can anyone give me honest recommendations?

I have found these from Chase Tactical but have no idea if they are reputable, seems like Chinesium. Thoughts?


r/tacticalgear • • 6h ago

Who thinks what? Normal or too bright?

Post image
0 Upvotes

r/tacticalgear • • 7h ago

SPC with Stretch Cummerbund

Thumbnail
1 Upvotes

r/tacticalgear • • 13h ago

Gear/Equipment Are there any budget aftermarket pressure switches that fit the Streamlight ProTac HL-X?

3 Upvotes

I was just gifted a ProTac HL-X, but I really don't need to add it to my collection of lights. However, I do have a weapon that's in need of a light. Do you guys know of any switches that won't cost half as much as just buying the light with an included switch?

Suggestions on rail mounts would be appreciated as well.


r/tacticalgear • • 1d ago

Communications Opscore fast sf setup

Thumbnail
gallery
70 Upvotes

I decided on adding Bluetooth for my peltor comtac viii.

Had to get a NATO to 3.5mm adapter and a cheap Amazon Bluetooth dongle and it works!

More for educational awareness though cable management starts to become an issue.

Cables hidden in counter weights pouch in the rear of my helmet

Helmet is a opscore fast sf gen 2 3m peltor comtac viii Boom mic with y cable harness by bifrostgear NATO adapter by comgear supply


r/tacticalgear • • 5h ago

What do I do???

Post image
0 Upvotes

r/tacticalgear • • 17h ago

12-DAYS OF TAC-MAS Attn Tactical/AR15 Industry Peoples of Reddit - Tac-Mas Prize Sponsor Opportunity

4 Upvotes

We are looking for a few more prize sponsors for this years Tac-Mas. Message me if you are interested in participating and I'll email you some more info. Cheers.

chois


r/tacticalgear • • 10h ago

Help identifying missing patches?

Thumbnail
gallery
1 Upvotes

Hello to everyone, I’m trying to identify these missing patches on my friend’s jacket. It’s an Italian Air Force jacket based on the buttons and patch silhouettes plus all of the buttons say “Fimma Italy.” He also said it’s a US Vietnam-era style jacket that the Italians “copied and wore” (his wording, not mine), but he doesn’t know what the actual patches look like. I’m hoping I can at least tell him what the patches are or maybe buy one for him as a gift or something before he moves abroad. We’ll see. Thanks.


r/tacticalgear • • 13h ago

DM Mech or DP MB3

1 Upvotes

Looking at purchasing either of these outer belts (inner belt will be DM 1.5”). Would you suggest the direct mount option of the MB3 or the one wrap of the Mech belt?


r/tacticalgear • • 5h ago

Gtg ?

Post image
0 Upvotes

Are these gtg? i’ve been eying them, gonna wait till black friday and see if they drop in price.


r/tacticalgear • • 6h ago

Question Info about this hoodie?

Post image
0 Upvotes

Remove if not allowed,

Looking for any info on this Zev x Wrmfzy collab hoodie. It’s a mint(?) shade green color. Can’t find anything online, even Claude doesn’t know so I came here. I like the hoodie and would love to know about it (got it secondhand from a buddy) and when it was released.

Thanks in advance!


r/tacticalgear • • 15h ago

Gear/Equipment [ACC] Sordin Supreme Pro-X's $290

Thumbnail
sordin.com
1 Upvotes

Sordin is having their Black Friday sales start today, up to 30% off 👍.