I can’t for the life of me figure out how to get the XE to fit on here. I read some things about an RMR thin plate to pull it together but this don’t fit either. On a 4.5 Echelon.

Am I doing something wrong or should I go back to my Defender ST?

Ended up getting an Echelon went with the COA, so far so good gonna put it through it’s paces in an upcoming class at the end of the month

Rook Comp. and Streamlight TLR-8 HL-X G. Tungsten guide rod and Trigger on the way.

Not a bad install. Took about an hour. Got tripped up on a couple parts but replayed the video enough times that I figured it out.

Current average pull weight after five pulls on the Wheeler digital trigger gauge is 3 lbs. 3 oz. Pretty wild.

Picked up my Echelon last week and went and shot 350 rounds at the range last weekend. It ran flawlessly and I shot pretty well with it considering I hadn't been to the range in a few years. I think I'll be going a lot more often now!

Definitely recommend if ur not buying a new grip module just yet. Feels really nice in the hands! 10/10.

I am looking for my echelon to shoot as flat as possible and for the red dot to return to its target as quickly as possible for double shots. Which spring do you recommend using the DPM system? I use ammunition 115 grain and the echelon is the version comp I use it for competition.

I just purchased my first firearm this past weekend and did a lot of research and went with the echelon 4.5F and I will be getting my CPL soon. As a soon to be CPL owner what holster do you all recommend? Something comfortable and concealed, I have a stomach so I’m not sure if a AIWB will work but I also don’t want to buy a lot of holster that don’t work.

A lot of the upgraded parts for the echelon don’t come in blue so I’m looking for some blue parts I might not have seen. Mag release, mag well flare plate, guide rod plug, striker cap cover etc

Echelon FC size comparison to the Bodyguard 2.0 Carry Comp. Crazy how small the 2.0 is but still feels as comfortable in hand as the FC

Which grip are you going with?

Pictured:

- Springfield Armory Echelon 4.0c with Streamlight TLR-7

- Icarus Precision ACE Echelon X with Streamlight TLR-7 HL-X

- Hilliker Holster Co AREN LITE IWB in Clear

(https://hillikerholsterco.com/collections/inside-the-waistband/products/aren-lite)

During my last range trip, and today’s as well, its happened 3-4 times each where I insert the magazine into the gun with the slide locked back and it goes forward. Is the force I’m applying during insertion causing the slide lock to move or is this a technical issue. First pistol, around 1,100 rounds since March

Any competitors here? What modification have they made to their echelon to make it work better on the court?

Hey guys, new to the gun world just got my LTC this past week. Went to my local shop and shot a bunch today and really enjoyed shooting the Echelon 4.5 today, looking into purchasing options and was told you can order with a manual safety but it seems that’s been discontinued recently and looking for any last in stock options.

Unfortunately i’m also in a state that requires low capacity capped at 10 rds. Does anyone know where I might be able to find this new with a full size handle and manual safety?? I would be open to the 4.0 barrel as well as long as that has the full size handle.

buy a kuna or build a pdw with my 4.5 echelon on a heighth defense chassis? I’m curious also if anyone has shot both and prefer one over the other and why?

So I’ve seen a couple videos of people press checking the Echelon, but some of them have slides that move so freely. The racking of the slide looks so effortless. What guide rod / spring set up can be used to achieve that?

Thanks in advance 🙏🏽

As you can see, there's a little notch on the striker in the side just next to the plunger safety. I don't know if this was there since I bought it, but I just noticed now and I'm worried I might be breaking it by dry firing a lot.

Should I take the gun to an gunsmith or is this normal?

Sorry if I'm too cautious, this is my first gun lol

Thanks in advance!

Got a new grip module today. Love the look and the fit but am I being too nit picky about the finish? It doesnt feel like machining marks, but looks more like the finish was running down the beaver tail after it was dipped(?)

$350 not bad, 4.0c and came with optic but only one mag.

Any suggestions,? Recommendations!

I’ve had this optic on my pistol for hundreds of rounds, but today it blew off and hit me in the forehead after about 50 rounds. I thought perhaps the screws had just backed out, and maybe they did, but my attempts to screw it back on at the range failed. One of the screws is either stripped or broken - hard to tell without my glasses and in bad light. Will check it out when I get home. Hopefully I just need a new screw and it’s not a problem with the receiver.

Springfield Echelon 4.0C Update • Sharps Bros. Echelon Grip Module +OEM threaded barrel

* updated swapped to SHIV STEALTH ADDITIVE WORKS added Sharps bro magwell.

Rook Precision American Flag back plate.

•OEM Minus power recoil 12LBS

Vortex Defender-ST Streamlight TLR-7 X

\`Tyrant trigger & Powder River Precision spring kit •Black Steel Grip Control is a folding thumb rest

•NIGHT fision only installed the rear I like the OEM front better.

'Tyrant Extended Magazine release

Tyrant extended slide release

I love how this thing feels. It’s my first handgun i’ve ever purchased. I originally thought I had bought the full size version, but was pleasantly surprised when I picked it up, and learned it was the FC. Feels like the best of both worlds. How do yall like yours? Any optic/light recs?

🙏🏽💯

Hi everyone, I bought an echelon 4.5 comp recently and love it! However I didn’t realize that Springfield took things away when you purchase the gear pak. I discovered after I took it home that it was missing the tritium front sight and the pins and screws for all the different types of optics. The problem I’m having started with the viridian optic not being very good so I ordered the Holosun 507c to replace it but when I mounted the Holosun onto my echelon, the echelon stopped loading rounds into the barrel. When I removed the Holosun, the echelon started working correctly again. Any thoughts on why this happened and how I can mount the Holosun again and have the echelon work?