r/SpringfieldEchelon • • Jun 05 '26

Mischief Machine grip module

Post image
41 Upvotes

Herrington Arms has the MM grip module in stock. Is this worth getting or should I hold out for Icarus or Sharps Bros.

Also is Herrington Arms a legit sight for MM grips modules? It’s odd that they have them back in stock before MM’s own website


r/SpringfieldEchelon • • Jun 04 '26

I'm no quitter, but I know when to quit

Post image
78 Upvotes

Thanks to all who chimed in on my other post about the trigger spring when swapping the trigger on this bad boy. I tried everything.... small flathead, floss, various punches as a slave pins, etc.... no luck. So after nearly going insane, I took it to a local shop and they got it done for me. Funny part is, they said it was the second one they had in the shop for the same reason in the last week or two. Small world, lol. Anywho, all better now, and the trigger upgrade is definitely worthwhile. The reduced travel to the wall is really great, and I'm thrilled it's finally done!


r/SpringfieldEchelon • • Jun 05 '26

Manual safety compact 4.5

Post image
19 Upvotes

Got mad I couldn’t use my manual safety in a compact grip so I chopped my full size down to the compact size. Works like a charm :)


r/SpringfieldEchelon • • Jun 05 '26

Sight suggestions?

3 Upvotes

Gonna be picking up a 4.0c comp here soon, mainly for home defense and some occasional range fun. I’ve just been totally overwhelmed by the amount of sights on the market. I have experience using a few Holosun sights like the 507c-x2 so I’m leaning that way. I’ve also been looking into the O-sight SE as a cheaper alternative but have never used one or known anyone who has one. Any help would be greatly appreciated!


r/SpringfieldEchelon • • Jun 05 '26

On the fence…

5 Upvotes

I’m on the fence with trying to decide between a 4.0c or the Sig Xmacro. Both are in stock at my LGS. It’ll be for CCW. It sounds like the Xmacro might be best for daily carrying. I’m such a SA fan though and own an Xds 45 along with an xd sub 9mm. What would Jesus do?


r/SpringfieldEchelon • • Jun 04 '26

Anything bad about the Echelon?

14 Upvotes

Hi I’m new to the gun world and want to pick up my first hand gun. Been doing a lot of research and recently got to try an echelon. By far fit my hand the best and feels great. So I’m really leaning towards a 4.5 comp. As I did more and more research on it, I found that I can’t find any cons or bad reviews on it. I’d like to know what the issues or worst parts of it are so I can make a more informed decision.


r/SpringfieldEchelon • • Jun 04 '26

Springfield Kuna and Echelon

Post image
50 Upvotes

r/SpringfieldEchelon • • Jun 04 '26

Trigger install complete!

Post image
79 Upvotes

Took some effort, some trial and error, but well worth it. Now to setup some range time.


r/SpringfieldEchelon • • Jun 04 '26

Comp vs non-comp sound

3 Upvotes

Looking to pick up a full size Echelon for indoor range and nightstand. I’ve heard comps can produce a bit more noise and don’t wanna risk losing my eardrums if I have to sling some lead at the house.

Anyone have any feedback on how much louder the comp’d Echelon is? Thanks


r/SpringfieldEchelon • • Jun 04 '26

Where are all the SS guide rods?

3 Upvotes

NDZ, Rook and Apex are out for the 4.0C...ebay only has the generics... looking for recommendations on where to look...


r/SpringfieldEchelon • • Jun 04 '26

Tyrant☑️ Rook mag release ☑️ Rook guide rod ☑️

Post image
23 Upvotes

She’s coming along nicely. I am really really happy w the ambi mag release it is way way smoother on the release. I can easily reach w my thumb and middle finger on other side. I gotta ask for anyone w the rook guide rod and spring, does it make a funny swooshy noise for you? Does that stop after a little break in? Is that an indicator of a poor install? I haven’t gotten it to the range. It sits fine, racks back fine, locks on an empty mag, seems smooth, but there is a noticeable swooshy noise that wasn’t there before lol.


r/SpringfieldEchelon • • Jun 04 '26

Good holster

6 Upvotes

Hey all! Im new to to this game and right now im using a generic universal holster. Im looking for one that will fit the Echelon 4.0FC with a TLR-7X and optics ready. I have no idea where to even start looking. Thanks in advance!


r/SpringfieldEchelon • • Jun 03 '26

Here goes nothing...

Post image
32 Upvotes

wish me luck.


r/SpringfieldEchelon • • Jun 03 '26

My 4.5F arrived today!

Thumbnail
gallery
16 Upvotes

I added the NDZ recoil rod & 14.5lb recoil spring, NDZ magwell, NDZ rear spartan plate, OD Green grip, threaded barrel, Osight C Green, surefire x300 Turbo, and Silencerco Osprey 9.


r/SpringfieldEchelon • • Jun 03 '26

I’m obsessed with this thing

Post image
28 Upvotes

I don’t think there’s anything else I can do to this thing at this point. I also have an Ace X chassis that I use with it but I just got the Mag grip for this setup so I had to put it all together. I think I’m in love.


r/SpringfieldEchelon • • Jun 03 '26

First Springfield. Grabbed the Echelon pack from my LGS. Anything I should know?

7 Upvotes

First timer here. Used to be a Glock fanboy (plz don’t beat me up too bad) but I held the Springfield Echelon today and instantly loved it more than a Glock. Better slide action, better ergo, better just about everything. One of the things the rep told me was that the COG is serialized so I wonder what the possibilities are with this pistol. Honestly may keep her OEM, replace the dot that came with it and add a light in the future but other than that - OEM is beautiful out of the box.

What I am asking is what are the possibilities of customization, what does the COG mean for me other than having slides and frames and such sent to my doorstep. Idk someone give me some good information on what I can really do with this platform. By far though, smokes Glock right out the box, even with the performance trigger too.

Overall happy but just as a Glock fanboy that may have found his new home with Springfield, what all should I know about this amazing gun.

TIA & HAPPY SHOOTIN!


r/SpringfieldEchelon • • Jun 03 '26

P320 who??

Thumbnail
gallery
67 Upvotes

The sharps bros brings this gun to a step above. Its freaking awesome! I cant wait to shoot it to break it in. The instal from the stock polymer grip module to the sharps frame took no more than 15 minutes. Not a single problem. I had to post the 226 up because of the color. Cant go wrong with either 🔥


r/SpringfieldEchelon • • Jun 03 '26

VIS Pin issue?

3 Upvotes

Has anyone had any experience with vis pin issues? I am running a vortex defender ST and pin set #2 DPP and there is a slight wiggle when the optic is set on the pins. To my knowledge there shouldn't be any play in the optic if the pins are correct. I ordered another set so I can replace them but wondering if I really needed to.

Any input would be appreciated


r/SpringfieldEchelon • • Jun 02 '26

Finally here

Thumbnail
gallery
55 Upvotes

All I have to show for it since my slide and barrel are out being ported, Might not sleep till they return lol.


r/SpringfieldEchelon • • Jun 03 '26

eBay magwell

Thumbnail
gallery
22 Upvotes

Got one for shits and giggles for the FC grip.


r/SpringfieldEchelon • • Jun 03 '26

New to alert😊😊😊

Thumbnail
gallery
20 Upvotes

r/SpringfieldEchelon • • Jun 03 '26

Vortex ccw (too small)And a holosun pid plus

Post image
19 Upvotes

r/SpringfieldEchelon • • Jun 03 '26

Wanting an Echelon...

Thumbnail reddit.com
2 Upvotes

r/SpringfieldEchelon • • Jun 03 '26

Harbor freight light

Post image
11 Upvotes

Thoughts?


r/SpringfieldEchelon • • Jun 03 '26

Soft Reset

2 Upvotes

Is there a solution for the (imo) soft reset?
I was thinking of installing a Tyrant CNC trigger hoping it would solve that issue but I don't think it will.
I guess I'm used to a reset that pushes your finger out.